Structural and magnetic properties os Si(100)/Ta/Co multilayers for spintronics applications

Thesis (Master)--Izmir Institute of Technology, Physics, Izmir, 2007Includes bibliographical references (leaves: 50-54)Text in English; Abstract: Turkish and Englishxi, 54 leavesThis thesis is concerned with the structural and magnetic properties of Si(100)/Ta/Co single and multilayer thin films grown by DC magnetron sputtering technique. The structural properties of the films have been studied by X-Ray Diffractometer (XRD), Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). This study revealed that a single Co film grows amorphous on silicon substrate up to 50 nm at room temperature. After this thickness, Co starts crystallizing in hexagonal (002) plane. The same crystallinity was also observed for 25 nm amorphous Co which was annealed at 4500C at high vacuum for 30 minutes. The presence of a single crystalline tetragonal Ta phase (-Ta) with the orientation along (002) has been observed for 40 nm Ta growth on silicon substrate. The Si(100)/Ta/Co bilayers and multilayers show good crystallinity for both Ta and Co films. SEM and AFM results show that all the single and multilayers grew uniform, continuous and with very low surface roughness. The magnetic properties of the films were investigated using Vibrating Sample Magnetometer (VSM), by measuring hysteresis loops. The effects of the thickness and growth pressure on the magnetic properties of Co films were studied. The easy magnetization axis of the samples is found to be parallel to the Co film plane. As the Co film thickness increased from 4 nm to 15 nm, the coercivity (Hc) decreased from 72 G to 20 G and after a threshold thickness it increased almost linearly up to 180 G for 100 nm film while the magnetization decreased. Moreover, it has been observed that as the Co growth pressure increases, the Hc value of Co films increases. Finally, we obtained two different Hc values for our MTJ sandwich with the structure of Si(100)/Ta/Co/TaOx/Co/Ta

Nucleation in the Ising ferromagnet by a field spatially spreading in time

The nucleation in Ising ferromagnet has been studied by Monte Carlo simulation. Here, the magnetic field is spreading over the space in time. The nucleation time is observed to increase as compared to that in the case of static field. The clusters of negative spins is observed to grow from the center. The growth of effective magnetisation is studied with temperature and the strength of spreading magnetic field. The ratio of nucleation time and effective time is also studied with strength of spreading magnetic field. The effective time would introduce itself as a new scale of time in the case of nucleation by spatially spreading magnetic field. The effective time and the nucleation time both are observed to decrease as a power law fashion with the rate factor of spreading magnetic field.Comment: 16 pages Latex, 8 figures, To appear in Physica

Tuning the polarization states of optical spots at the nanoscale on the poincar´e sphere using a plasmonic nanoantenna

It is shown that the polarization states of optical spots at the nanoscale can be manipulated to various points on the Poincar´e sphere using a plasmonic nanoantenna. Linearly, circularly, and elliptically polarized near-field optical spots at the nanoscale are achieved with various polarization states on the Poincar´e sphere using a plasmonic nanoantenna. A novel plasmonic nanoantenna is illuminated with diffraction-limited linearly polarized light. It is demonstrated that the plasmonic resonances of perpendicular and longitudinal components of the nanoantenna and the angle of incident polarization can be tuned to obtain optical spots beyond the diffraction limit with a desired polarization and handedness

Otobüs Yedek Parça Üretiminde Ölçüm Sistem Analizi Uygulaması

Rekabet ortamının giderek artması sonucu işletmeler, maliyetlerini düşürmek ve aynı zamanda kalitelerini arttırmak zorunda kalmaktadır. Bu durum işletmeleri çeşitli kalite iyileştirme tekniklerinden yararlanmaya yönlendirmiştir. Altı Sigma başta olmak üzere çoğu kalite iyileştirme yöntemleri veri odaklı yaklaşımlar olup, bu yöntemlerin başarılı olmasının ilk şartı kullanılan verilerin güvenilir olmasıdır. Bu durum kalite iyileştirme çalışmalarında, ilk adım olarak verilerin elde edildiği ölçüm sistemlerinin güvenilirliğinden emin olunmasını gerekmektedir. Bu çalışmada, bir otobüs yedek parçasının ölçümünde kullanılan sistemin güvenilirliği iki farklı yöntem kullanılarak analiz edilmiştir. Her iki yönteme göre kullanılan ölçüm sisteminin kabul edilebilir seviyede yeterli olduğu fakat iyileştirme fırsatları içerdiği sonucuna varılmıştır

Magnetisation switching of FePt nanoparticle recording medium by femtosecond laser pulses

Manipulation of magnetisation with ultrashort laser pulses is promising for information storage device applications. The dynamics of the magnetisation response depends on the energy transfer from the photons to the spins during the initial laser excitation. A material of special interest for magnetic storage are FePt nanoparticles, for which switching of the magnetisation with optical angular momentum was demonstrated recently. The mechanism remained unclear. Here we investigate experimentally and theoretically the all-optical switching of FePt nanoparticles. We show that the magnetisation switching is a stochastic process. We develop a complete multiscale model which allows us to optimize the number of laser shots needed to switch the magnetisation of high anisotropy FePt nanoparticles in our experiments. We conclude that only angular momentum induced optically by the inverse Faraday effect will provide switching with one single femtosecond laser pulse.EC under Contract No. 281043, FemtoSpin. The work at Greifswald University was supported by the German research foundation (DFG), projects MU MU 1780/8-1, MU 1780/10-1. Research at Göttingen University was supported via SFB 1073, Projects A2 and B1. Research at Uppsala University was supported by the Swedish Research Council (VR), the Röntgen-Ångström Cluster, the Knut and Alice Wallenberg Foundation (Contract No. 2015.0060), and Swedish National Infrastructure for Computing (SNIC). Research at Kiel University was supported by the DFG, projects MC 9/9-2, MC 9/10-2. P.N. acknowledges support from EU Horizon 2020 Framework Programme for Research and Innovation (2014-2020) under Grant Agreement No. 686056, NOVAMAG. The work in Konstanz was supported via the Center for Applied Photonics

Two-magnon bound state causes ultrafast thermally induced magnetisation switching.

There has been much interest recently in the discovery of thermally induced magnetisation switching using femtosecond laser excitation, where a ferrimagnetic system can be switched deterministically without an applied magnetic field. Experimental results suggest that the reversal occurs due to intrinsic material properties, but so far the microscopic mechanism responsible for reversal has not been identified. Using computational and analytic methods we show that the switching is caused by the excitation of two-magnon bound states, the properties of which are dependent on material factors. This discovery allows us to accurately predict the onset of switching and the identification of this mechanism will allow new classes of materials to be identified or designed for memory devices in the THz regime

Ultrafast and Distinct Spin Dynamics in Magnetic Alloys

Controlling magnetic order on ultrashort timescales is crucial for engineering the next-generation magnetic devices that combine ultrafast data processing with ultrahigh-density data storage. An appealing scenario in this context is the use of femtosecond (fs) laser pulses as an ultrafast, external stimulus to fully set the orientation and the magnetization magnitude of a spin ensemble. Achieving such control on ultrashort timescales, e.g., comparable to the excitation event itself, remains however a challenge due to the lack of understanding the dynamical behavior of the key parameters governing magnetism: The elemental magnetic moments and the exchange interaction. Here, we investigate the fs laser-induced spin dynamics in a variety of multi-component alloys and reveal a dissimilar dynamics of the constituent magnetic moments on ultrashort timescales. Moreover, we show that such distinct dynamics is a general phenomenon that can be exploited to engineer new magnetic media with tailor-made, optimized dynamic properties. Using phenomenological considerations, atomistic modeling and time-resolved X-ray magnetic circular dichroism (XMCD), we demonstrate demagnetization of the constituent sub-lattices on significantly different timescales that depend on their magnetic moments and the sign of the exchange interaction. These results can be used as a “recipe” for manipulation and control of magnetization dynamics in a large class of magnetic materials

Ultrafast heating as a sufficient stimulus for magnetization reversal in a ferrimagnet.

The question of how, and how fast, magnetization can be reversed is a topic of great practical interest for the manipulation and storage of magnetic information. It is generally accepted that magnetization reversal should be driven by a stimulus represented by time-non-invariant vectors such as a magnetic field, spin-polarized electric current, or cross-product of two oscillating electric fields. However, until now it has been generally assumed that heating alone, not represented as a vector at all, cannot result in a deterministic reversal of magnetization, although it may assist this process. Here we show numerically and demonstrate experimentally a novel mechanism of deterministic magnetization reversal in a ferrimagnet driven by an ultrafast heating of the medium resulting from the absorption of a sub-picosecond laser pulse without the presence of a magnetic field

All-optical switching in granular ferromagnets caused by magnetic circular dichroism

Magnetic recording using circularly polarised femto-second laser pulses is an emerging technology that would allow write speeds much faster than existing field driven methods. However, the mechanism that drives the magnetisation switching in ferromagnets is unclear. Recent theories suggest that the interaction of the light with the magnetised media induces an opto-magnetic field within the media, known as the inverse Faraday effect. Here we show that an alternative mechanism, driven by thermal excitation over the anisotropy energy barrier and a difference in the energy absorption depending on polarisation, can create a net magnetisation over a series of laser pulses in an ensemble of single domain grains. Only a small difference in the absorption is required to reach magnetisation levels observed experimentally and the model does not preclude the role of the inverse Faraday effect but removes the necessity that the opto-magnetic field is 10 s of Tesla in strength