Coupling Between Flow and Precipitation in Heterogeneous Subsurface Environments and Effects On Contaminant Fate and Transport

Reactive mixing fronts can occur at large scales, e.g. when chemical amendments are injected in wells, or at small scales (pore-scales) when reactive intermediates are being generated in situ at grain boundaries, cell surfaces and adjacent to biofilms. The product of the reactions such as mineral precipitates, biofilms or filtered colloids modifies permeability leading to the complex coupling between flow and reactions and precipitation. The objectives are to determine how precipitates are distributed within large and small scale mixing fronts, how permeability and flow is modified by precipitation, how the mobility of a representative contaminant, strontium, is affected by the precipitation of carbonates, and how subsequent dissolution of the carbonates result in mobilization of Sr and increased flow. The desired outcomes of the project are to help develop methods leading to sequestration of metal contaminants, and to determine how macroscopic field-scale modeling can be applied to predict the outcome of remediation activities

Evaluation of Soil Flushing for Application to the Deep Vadose Zone in the Hanford Central Plateau

Soil flushing was included in the Deep Vadose Zone Treatability Test Plan for the Hanford Central Plateau as a technology with the potential to remove contaminants from the vadose zone. Soil flushing operates through the addition of water, and if necessary an appropriate mobilizing agent, to mobilize contaminants and flush them from the vadose zone and into the groundwater where they are subsequently captured by a pump-and-treat system. There are uncertainties associated with applying soil flushing technology to contaminants in the deep vadose zone at the Hanford Central Plateau. The modeling and laboratory efforts reported herein are intended to provide a quantitative assessment of factors that impact water infiltration and contaminant flushing through the vadose zone and into the underlying groundwater. Once in the groundwater, capture of the contaminants would be necessary, but this aspect of implementing soil flushing was not evaluated in this effort. Soil flushing was evaluated primarily with respect to applications for technetium and uranium contaminants in the deep vadose zone of the Hanford Central Plateau

Federated Identity Management for Research Collaborations

This white-paper expresses common requirements of Research Communities seeking to leverage Identity Federation for Authentication and Authorisation. Recommendations are made to Stakeholders to guide the future evolution of Federated Identity Management in a direction that better satisfies research use cases. The authors represent research communities, Research Services, Infrastructures, Identity Federations and Interfederations, with a joint motivation to ease collaboration for distributed researchers. The content has been edited collaboratively by the Federated Identity Management for Research (FIM4R) Community, with input sought at conferences and meetings in Europe, Asia and North America

Fluorescence spectroscopy for wastewater monitoring: A review

© 2016. Wastewater quality is usually assessed using physical, chemical and microbiological tests, which are not suitable for online monitoring, provide unreliable results, or use hazardous chemicals. Hence, there is an urgent need to find a rapid and effective method for the evaluation of water quality in natural and engineered systems and for providing an early warning of pollution events. Fluorescence spectroscopy has been shown to be a valuable technique to characterize and monitor wastewater in surface waters for tracking sources of pollution, and in treatment works for process control and optimization. This paper reviews the current progress in applying fluorescence to assess wastewater quality. Studies have shown that, in general, wastewater presents higher fluorescence intensity compared to natural waters for the components associated with peak T (living and dead cellular material and their exudates) and peak C (microbially reprocessed organic matter). Furthermore, peak T fluorescence is significantly reduced after the biological treatment process and peak C is almost completely removed after the chlorination and reverse osmosis stages. Thus, simple fluorometers with appropriate wavelength selectivity, particularly for peaks T and C could be used for online monitoring in wastewater treatment works. This review also shows that care should be taken in any attempt to identify wastewater pollution sources due to potential overlapping fluorophores. Correlations between fluorescence intensity and water quality parameters such as biochemical oxygen demand (BOD) and total organic carbon (TOC) have been developed and dilution of samples, typically up to ×10, has been shown to be useful to limit inner filter effect. It has been concluded that the following research gaps need to be filled: lack of studies on the on-line application of fluorescence spectroscopy in wastewater treatment works and lack of data processing tools suitable for rapid correction and extraction of data contained in fluorescence excitation-emission matrices (EEMs) for real-time studies

Simulating social-ecological systems: the Island Digital Ecosystem Avatars (IDEA) consortium

Abstract Systems biology promises to revolutionize medicine, yet human wellbeing is also inherently linked to healthy societies and environments (sustainability). The IDEA Consortium is a systems ecology open science initiative to conduct the basic scientific research needed to build use-oriented simulations (avatars) of entire social-ecological systems. Islands are the most scientifically tractable places for these studies and we begin with one of the best known: Moorea, French Polynesia. The Moorea IDEA will be a sustainability simulator modeling links and feedbacks between climate, environment, biodiversity, and human activities across a coupled marine-terrestrial landscape. As a model system, the resulting knowledge and tools will improve our ability to predict human and natural change on Moorea and elsewhere at scales relevant to management/conservation actions

EMSL Pore Scale Modeling Challenge/Workshop

Report covers the background for the workshop, objectives, important research directions, necessary capabilities and overall recommendations

A Particle Model for Prediction of Cement Infiltration of Cancellous Bone in Osteoporotic Bone Augmentation.

PMC3693961Femoroplasty is a potential preventive treatment for osteoporotic hip fractures. It involves augmenting mechanical properties of the femur by injecting Polymethylmethacrylate (PMMA) bone cement. To reduce the risks involved and maximize the outcome, however, the procedure needs to be carefully planned and executed. An important part of the planning system is predicting infiltration of cement into the porous medium of cancellous bone. We used the method of Smoothed Particle Hydrodynamics (SPH) to model the flow of PMMA inside porous media. We modified the standard formulation of SPH to incorporate the extreme viscosities associated with bone cement. Darcy creeping flow of fluids through isotropic porous media was simulated and the results were compared with those reported in the literature. Further validation involved injecting PMMA cement inside porous foam blocks - osteoporotic cancellous bone surrogates - and simulating the injections using our proposed SPH model. Millimeter accuracy was obtained in comparing the simulated and actual cement shapes. Also, strong correlations were found between the simulated and the experimental data of spreading distance (R2 = 0.86) and normalized pressure (R2 = 0.90). Results suggest that the proposed model is suitable for use in an osteoporotic femoral augmentation planning framework.JH Libraries Open Access Fun