Effects of land markets and land management on ecosystem function: A framework for modelling exurban land-change

This paper presents the conceptual design and application of a new land-change modelling framework that represents geographical, sociological, economic, and ecological aspects of a land system. The framework provides an overarching design that can be extended into specific model implementations to evaluate how policy, land-management preferences, and land-market dynamics affect (and are affected by) land-use and land-cover change patterns and subsequent carbon storage and flux. To demonstrate the framework, we implement a simple integration of a new agent-based model of exurban residential development and land-management decisions with the ecosystem process model BIOME-BGC. Using a stylized scenario, we evaluate the influence of different exurban residential-land-management strategies on carbon storage at the parcel level over a 48-year period from 1958 to 2005, simulating stocks of carbon in soil, litter, vegetation, and net primary productivity. Results show 1) residential parcels with management practices that only provided additions in the form of fertilizer and irrigation to turfgrass stored slightly more carbon than parcels that did not include management practices, 2) conducting no land-management strategy stored more carbon than implementing a strategy that included removals in the form of removing coarse woody debris from dense tree cover and litter from turfgrass, and 3) the removal practices modelled had a larger impact on total parcel carbon storage than our modelled additions. The degree of variation within the evaluated land-management practices was approximately 42,104 kg C storage on a 1.62 ha plot after 48 years, demonstrating the substantial effect that residential land-management practices can have on carbon storag

Glueball spectrum based on a rigorous three-dimensional relativistic equation for two-gluon bound states II: calculation of the glueball spectrum

In the preceding paper, a rigorous three-dimensional relativistic equation for two-gluon bound states was derived from the QCD with massive gluons and represented in the angular momentum representation. In order to apply this equation to calculate the glueball spectrum, in this paper, the equation is recast in an equivalent three-dimensional relativistic equation satisfied by the two-gluon positive energy state amplitude. The interaction Hamiltonian in the equation is exactly derived and expressed as a perturbative series. The first term in the series describes the one-gluon exchange interaction which includes fully the retardation effect in it. This term plus the linear confining potential are chosen to be the interaction Hamiltonian and employed in the practical calculation. With the integrals containing three and four spherical Bessel functions in the QCD vertices being analytically calculated, the interaction Hamiltonian is given an explicit expression in the angular momentum representation. Numerically solving the relativistic equation with taking the contributions arising from the retardation effect and the longitudinal mode of gluon fields into account, a set of masses for the $0^{++},0^{-+},1^{++},1^{-+},2^{++}$ and $2^{-+\text{}}$ glueball states are obtained and are in fairly good agreement with the predictions given by the lattice simulatio

Size-dependent Correlation Effects in Ultrafast Optical Dynamics of Metal Nanoparticles

We study the role of collective surface excitations in the electron relaxation in small metal particles. We show that the dynamically screened electron-electron interaction in a nanoparticle contains a size-dependent correction induced by the surface. This leads to new channels of quasiparticle scattering accompanied by the emission of surface collective excitations. We calculate the energy and temperature dependence of the corresponding rates, which depend strongly on the nanoparticle size. We show that the surface-plasmon-mediated scattering rate of a conduction electron increases with energy, in contrast to that mediated by a bulk plasmon. In noble-metal particles, we find that the dipole collective excitations (surface plasmons) mediate a resonant scattering of d-holes to the conduction band. We study the role of the latter effect in the ultrafast optical dynamics of small nanoparticles and show that, with decreasing nanoparticle size, it leads to a drastic change in the differential absorption lineshape and a strong frequency dependence of the relaxation near the surface plasmon resonance. The experimental implications of our results in ultrafast pump-probe spectroscopy are also discussed.Comment: 29 pages including 6 figure

The fracture behaviour of adhesively-bonded composite joints: Effects of rate of test and mode of loading

AbstractThe present paper discusses the results of an investigation into the effects of test rate and the mode of loading on the fracture energy, Gc, of adhesively-bonded fibre-composite joints. Various carbon-fibre reinforced-polymer (CFRP) matrix composite substrates have been bonded using two different types of automotive structural epoxy-adhesives. They have been tested via loading the bonded joints in mode I (tensile), mode II (in-plane shear) and mixed-mode I/II from slow rates (i.e., of about 10−5m/s) up to relatively high rates of test of about 15m/s. The high-rate tests were photographed using a high-speed digital video camera to record the deformation of the joint and the fracture behaviour. An analysis strategy has been developed for the various modes of loading (i) to account for the observed fracture behaviour, (ii) to circumvent the problems posed by oscillations in the load traces due to the presence of dynamic effects in the faster tests, and (iii) to account for the kinetic energy associated with the moving specimen arms in the faster tests. Based on the analysis strategy developed, the effect of the test rate on the fracture energy, Gc, for the different loading modes for the joints has been ascertained. Furthermore, various different fracture paths were observed in the tests. They were either cohesive, in the adhesive layer, or interlaminar in the composite substrates. The exact fracture path observed was a function of (i) the type of composite substrate, (ii) the type of adhesive, and (iii) the mode of loading employed. However, the nature of the fracture path was found to be quite insensitive to the test rate. Essentially, it was found that joints subjected to mixed-mode I/II loading were more likely to exhibit an interlaminar fracture path in the composite substrates than when loaded in either pure modes I or II. The propensity for a given joint to exhibit such a fracture path via delamination of the composite substrate has been explained by calculating the transverse tensile stresses induced in the loaded composite arms, and comparing this value to the measured transverse tensile strength of the composite. Following this approach, the underlying reasons for the observed fracture path were identified and could be predicted. Also, the proposed scheme provides a route to design against delamination failure occurring in adhesively-bonded fibre-composite test specimens

Phenomenological Analysis of B->PP Decays with QCD Factorization

In this paper, we study nonleptonic charmless B decays to two light pseudoscalar mesons within the frame of QCD factorization, including the contributions from the chirally enhanced power corrections and weak annihilation. Predictions for the CP-averaged branching ratios and CP-violating asymmetries are given. Within the reasonable range of the parameters, we find that our predictions for the branching ratios of B -> PP are consistent with the present experimental data. But because of the logarithmic divergences at the endpoints in the hard spectator scatterings and weak annihilation, there are still large uncertainties in these predictions.Comment: 34 pages, 5 figures. to appear in PR

Measurements of ψ(2S)\psi(2S) decays into Vector- Tensor final states

Decays of the $\psi(2S)$ into vector plus tensor meson final states have been studied with 14 million $\psi(2S)$ events collected with the BESII detector. Branching fractions of \psi(2S) \rt \omega f_{2}(1270), $\rho a_2(1320)$, $K^*(892)^0\bar{K}^*_2(1430)^0+c.c.$ and $\phi f_2^{\prime}(1525)$ are determined. They improve upon previous BESI results and confirm the violation of the "12%" rule for $\psi(2S)$ decays to VT channels with higher precision.Comment: 7 pages, 7 figures and 2 table

Inclusive eta' Production from the Upsilon(1S)

Using the CLEO II detector at CESR, we measure the eta' - gluon - gluon form-factor in Y(1S) decays. This form-factor especially at large eta' energies may provide an explanation of the large rate for B -> Xs eta'. Our data do not support a large anomalous coupling at higher q^2 and thus the large eta' rate remains a mystery, possibly requiring a non-Standard Model explanation.Comment: 14 pages postscript, also available through http://w4.lns.cornell.edu/public/CLNS, submitted to PR

Observation of the Ξc+\Xi_c^+ Charmed Baryon Decays to Σ+K−π+\Sigma^+ K^-\pi^+, Σ+Kˉ∗0\Sigma^+ \bar{K}^{*0}, and ΛK−π+π+\Lambda K^-\pi^+\pi^+

We have observed two new decay modes of the charmed baryon $\Xi_c^+$ into $\Sigma^+ K^-\pi^+$ and $\Sigma^+ \bar{K}^{*0}$ using data collected with the CLEO II detector. We also present the first measurement of the branching fraction for the previously observed decay mode $\Xi_c^+\to\Lambda K^-\pi^+\pi^+$. The branching fractions for these three modes relative to $\Xi_c^+\to\Xi^-\pi^+\pi^+$ are measured to be $1.18 \pm 0.26 \pm 0.17$, $0.92 \pm 0.27 \pm 0.14$, and $0.58 \pm 0.16 \pm 0.07$, respectively.Comment: 12 page uuencoded postscript file, postscript file also available through http://w4.lns.cornell.edu/public/CLN

Time-integrated luminosity recorded by the BABAR detector at the PEP-II e+e- collider

This article is the Preprint version of the final published artcile which can be accessed at the link below.We describe a measurement of the time-integrated luminosity of the data collected by the BABAR experiment at the PEP-II asymmetric-energy e+e- collider at the ϒ(4S), ϒ(3S), and ϒ(2S) resonances and in a continuum region below each resonance. We measure the time-integrated luminosity by counting e+e-→e+e- and (for the ϒ(4S) only) e+e-→μ+μ- candidate events, allowing additional photons in the final state. We use data-corrected simulation to determine the cross-sections and reconstruction efficiencies for these processes, as well as the major backgrounds. Due to the large cross-sections of e+e-→e+e- and e+e-→μ+μ-, the statistical uncertainties of the measurement are substantially smaller than the systematic uncertainties. The dominant systematic uncertainties are due to observed differences between data and simulation, as well as uncertainties on the cross-sections. For data collected on the ϒ(3S) and ϒ(2S) resonances, an additional uncertainty arises due to ϒ→e+e-X background. For data collected off the ϒ resonances, we estimate an additional uncertainty due to time dependent efficiency variations, which can affect the short off-resonance runs. The relative uncertainties on the luminosities of the on-resonance (off-resonance) samples are 0.43% (0.43%) for the ϒ(4S), 0.58% (0.72%) for the ϒ(3S), and 0.68% (0.88%) for the ϒ(2S).This work is supported by the US Department of Energy and National Science Foundation, the Natural Sciences and Engineering Research Council (Canada), the Commissariat à l’Energie Atomique and Institut National de Physique Nucléaire et de Physiquedes Particules (France), the Bundesministerium für Bildung und Forschung and Deutsche Forschungsgemeinschaft (Germany), the Istituto Nazionale di Fisica Nucleare (Italy), the Foundation for Fundamental Research on Matter (The Netherlands), the Research Council of Norway, the Ministry of Education and Science of the Russian Federation, Ministerio de Ciencia e Innovación (Spain), and the Science and Technology Facilities Council (United Kingdom). Individuals have received support from the Marie-Curie IEF program (European Union) and the A.P. Sloan Foundation (USA)

Prediction of Mechanical Properties of Polymers With Various Force Fields

The effect of force field type on the predicted elastic properties of a polyimide is examined using a multiscale modeling technique. Molecular Dynamics simulations are used to predict the atomic structure and elastic properties of the polymer by subjecting a representative volume element of the material to bulk and shear finite deformations. The elastic properties of the polyimide are determined using three force fields: AMBER, OPLS-AA, and MM3. The predicted values of Young s modulus and shear modulus of the polyimide are compared with experimental values. The results indicate that the mechanical properties of the polyimide predicted with the OPLS-AA force field most closely matched those from experiment. The results also indicate that while the complexity of the force field does not have a significant effect on the accuracy of predicted properties, small differences in the force constants and the functional form of individual terms in the force fields determine the accuracy of the force field in predicting the elastic properties of the polyimide