286 research outputs found

    The Primordial Helium Abundance: Towards Understanding and Removing the Cosmic Scatter in the dY/dZ Relation

    Get PDF
    We present results from photoionization models of low-metallicity HII regions. These nebulae form the basis for measuring the primordial helium abundance. Our models show that the helium ionization correction factor (ICF) can be non-negligible for nebulae excited by stars with effective temperatures larger than 40,000 K. Furthermore, we find that when the effective temperature rises to above 45,000 K, the ICF can be significantly negative. This result is independent of the choice of stellar atmosphere. However, if an HII region has an [O III] 5007/[O I] 6300 ratio greater than 300, then our models show that, regardless of its metallicity, it will have a negligibly small ICF. A similar, but metallicity dependent, result was found using the [O III] 5007/HÎČ\beta ratio. These two results can be used as selection criteria to remove nebulae with potentially non-negligible ICFs. Using our metallicity independent criterion on the data of Izotov & Thuan (1998) results in a 20% reduction of the rms scatter about the best fit Y−ZY-Z line. A fit to the selected data results in a slight increase of the value of the primordial helium abundance.Comment: 10 pages, 5 figures, accepted by the Ap

    The Low- and Intermediate-Mass Stellar Population in the Small Magellanic Cloud: The Central Stars of Planetary Nebulae

    Full text link
    We present a study on the central stars (CSs) of Planetary Nebulae (PNe) observed in the Small Magellanic Cloud (SMC) with the Space Telescope Imaging Spectrograph instrument on-board the HST. The stellar magnitudes have been measured using broad-band photometry, and Zanstra analysis of the nebulae provided the stellar temperatures. From the location of the CSs on the HR diagram, and by comparing the observed CSs with current models of stellar evolution, we infer the CSs masses. We examine closely the possibility of light contamination in the bandpass from an unrecognized stellar companion, and we establish strong constraints on the existence and nature of any binary companion. We find an average mass of 0.63 Msun, which is similar to the mass obtained for a sample of CSs in the LMC (0.65 Msun). However, the SMC and LMC CS mass distributions differ slightly, the SMC sample lacking an intermediate-mass stellar population (0.65 to 0.75 Msun). We discuss the significance and possible reasons for the difference between the two mass distributions. In particular, we consider the differences in the star formation history between the clouds and the mass-loss rate dependence on metallicity.Comment: 30 pages, 6 figures, 5 tables. To be published in ApJ (October 20

    An Approach to the Bio-Inspired Control of Self-reconfigurable Robots

    Get PDF
    Self-reconfigurable robots are robots built by modules which can move in relationship to each other. This ability of changing its physical form provides the robots a high level of adaptability and robustness. Given an initial configuration and a goal configuration of the robot, the problem of self-regulation consists on finding a sequence of module moves that will reconfigure the robot from the initial configuration to the goal configuration. In this paper, we use a bio-inspired method for studying this problem which combines a cluster-flow locomotion based on cellular automata together with a decentralized local representation of the spatial geometry based on membrane computing ideas. A promising 3D software simulation and a 2D hardware experiment are also presented.National Natural Science Foundation of China No. 6167313

    Modelling the Pan-Spectral Energy Distribution of Starburst Galaxies: III. Emission Line Diagnostics of Ensembles of Evolving HII Regions

    Full text link
    We build, as far as theory will permit, self consistent model HII regions around central clusters of aging stars. These produce strong emission line diagnostics applicable to either individual HII regions in galaxies, or to the integrated emission line spectra of disk or starburst galaxies. The models assume that the expansion and internal pressure of individual HII regions is driven by the net input of mechanical energy from the central cluster, be it through winds or supernova events. This eliminates the ionization parameter as a free variable, replacing it with a parameter which depends on the ratio of the cluster mass to the pressure in the surrounding interstellar medium. These models explain why HII regions with low abundances have high excitation, and demonstrate that at least part of the warm ionized medium is the result of overlapping faint, old, large, and low pressure HII regions. We present line ratios (at both optical and IR wavelengths) which provide reliable abundance diagnostics for both single HII regions or for integrated galaxy spectra, and we find a number that can be used to estimate the mean age of the cluster stars exciting individual HII regions.Comment: 22 pages. 18 figures. Accepted for publication in Astrophysical journal Supplements. Electronic tabular material is available on request to [email protected]

    Three Dimensional Electrical Impedance Tomography

    Get PDF
    The electrical resistivity of mammalian tissues varies widely and is correlated with physiological function. Electrical impedance tomography (EIT) can be used to probe such variations in vivo, and offers a non-invasive means of imaging the internal conductivity distribution of the human body. But the computational complexity of EIT has severe practical limitations, and previous work has been restricted to considering image reconstruction as an essentially two-dimensional problem. This simplification can limit significantly the imaging capabilities of EIT, as the electric currents used to determine the conductivity variations will not in general be confined to a two-dimensional plane. A few studies have attempted three-dimensional EIT image reconstruction, but have not yet succeeded in generating images of a quality suitable for clinical applications. Here we report the development of a three-dimensional EIT system with greatly improved imaging capabilities, which combines our 64-electrode data-collection apparatus with customized matrix inversion techniques. Our results demonstrate the practical potential of EIT for clinical applications, such as lung or brain imaging and diagnostic screening

    Thermal adaptation of net ecosystem exchange

    Get PDF
    Thermal adaptation of gross primary production and ecosystem respiration has been well documented over broad thermal gradients. However, no study has examined their interaction as a function of temperature, i.e. the thermal responses of net ecosystem exchange of carbon (NEE). In this study, we constructed temperature response curves of NEE against temperature using 380 site-years of eddy covariance data at 72 forest, grassland and shrubland ecosystems located at latitudes ranging from ~29° N to 64° N. The response curves were used to define two critical temperatures: transition temperature (<i>T</i><sub>b</sub>) at which ecosystem transfer from carbon source to sink and optimal temperature (<i>T</i><sub>o</sub>) at which carbon uptake is maximized. <i>T</i><sub>b</sub> was strongly correlated with annual mean air temperature. <i>T</i><sub>o</sub> was strongly correlated with mean temperature during the net carbon uptake period across the study ecosystems. Our results imply that the net ecosystem exchange of carbon adapts to the temperature across the geographical range due to intrinsic connections between vegetation primary production and ecosystem respiration

    Processing arctic eddy-flux data using a simple carbon-exchange model embedded in the ensemble Kalman filter

    Get PDF
    Author Posting. © Ecological Society of America, 2010. This article is posted here by permission of Ecological Society of America for personal use, not for redistribution. The definitive version was published in Ecological Applications 20 (2010): 1285–1301, doi:10.1890/09-0876.1.Continuous time-series estimates of net ecosystem carbon exchange (NEE) are routinely made using eddy covariance techniques. Identifying and compensating for errors in the NEE time series can be automated using a signal processing filter like the ensemble Kalman filter (EnKF). The EnKF compares each measurement in the time series to a model prediction and updates the NEE estimate by weighting the measurement and model prediction relative to a specified measurement error estimate and an estimate of the model-prediction error that is continuously updated based on model predictions of earlier measurements in the time series. Because of the covariance among model variables, the EnKF can also update estimates of variables for which there is no direct measurement. The resulting estimates evolve through time, enabling the EnKF to be used to estimate dynamic variables like changes in leaf phenology. The evolving estimates can also serve as a means to test the embedded model and reconcile persistent deviations between observations and model predictions. We embedded a simple arctic NEE model into the EnKF and filtered data from an eddy covariance tower located in tussock tundra on the northern foothills of the Brooks Range in northern Alaska, USA. The model predicts NEE based only on leaf area, irradiance, and temperature and has been well corroborated for all the major vegetation types in the Low Arctic using chamber-based data. This is the first application of the model to eddy covariance data. We modified the EnKF by adding an adaptive noise estimator that provides a feedback between persistent model data deviations and the noise added to the ensemble of Monte Carlo simulations in the EnKF. We also ran the EnKF with both a specified leaf-area trajectory and with the EnKF sequentially recalibrating leaf-area estimates to compensate for persistent model-data deviations. When used together, adaptive noise estimation and sequential recalibration substantially improved filter performance, but it did not improve performance when used individually. The EnKF estimates of leaf area followed the expected springtime canopy phenology. However, there were also diel fluctuations in the leaf-area estimates; these are a clear indication of a model deficiency possibly related to vapor pressure effects on canopy conductance.This material is based upon work supported by the U.S. National Science Foundation under grants OPP-0352897, DEB-0423385, DEB-0439620, DEB-0444592, and OPP- 0632139

    Three-dimensional chemically homogeneous and bi-abundance photoionization models of the "super-metal-rich" planetary nebula NGC 6153

    Full text link
    Deep spectroscopy of the planetary nebula (PN) NGC\,6153 shows that its heavy element abundances derived from optical recombination lines (ORLs) are ten times higher than those derived from collisionally excited lines (CELs), and points to the existence of H-deficient inclusions embedded in the diffuse nebula. In this study, we have constructed chemically homogeneous and bi-abundance three-dimensional photoionization models, using the Monte Carlo photoionization code {\sc mocassin}. We attempt to reproduce the multi-waveband spectroscopic and imaging observations of NGC\,6153, and investigate the nature and origin of the postulated H-deficient inclusions, as well as their impacts on the empirical nebular analyses assuming a uniform chemical composition. Our results show that chemically homogeneous models yield small electron temperature fluctuations and fail to reproduce the strengths of ORLs from C, N, O and Ne ions. In contrast, bi-abundance models incorporating a small amount of metal-rich inclusions (∌1.3\sim 1.3 per cent of the total nebular mass) are able to match all the observations within the measurement uncertainties. The metal-rich clumps, cooled down to a very low temperature (∌800\sim 800~K) by ionic infrared fine-structure lines, dominate the emission of heavy element ORLs, but contribute almost nil to the emission of most CELs. We find that the abundances of C, N, O and Ne derived empirically from CELs, assuming a uniform chemical composition, are about 30 per cent lower than the corresponding average values of the whole nebula, including the contribution from the H-deficient inclusions. Ironically, in the presence of H-deficient inclusions, the traditional standard analysis of the optical helium recombination lines, assuming a chemically homogeneous nebula, overestimates the helium abundance by 40 per cent.Comment: 19 pages, 18 figures, accepted for publication in MNRA

    Whitepaper: Understanding land-atmosphere interactions through tower-based flux and continuous atmospheric boundary layer measurements

    Get PDF
    Executive summary ● Target audience: AmeriFlux community, AmeriFlux Science Steering Committee & Department of Energy (DOE) program managers [ARM/ASR (atmosphere), TES (surface), and SBR (subsurface)] ● Problem statement: The atmospheric boundary layer mediates the exchange of energy and matter between the land surface and the free troposphere integrating a range of physical, chemical, and biological processes. However, continuous atmospheric boundary layer observations at AmeriFlux sites are still scarce. How can adding measurements of the atmospheric boundary layer enhance the scientific value of the AmeriFlux network? ● Research opportunities: We highlight four key opportunities to integrate tower-based flux measurements with continuous, long-term atmospheric boundary layer measurements: (1) to interpret surface flux and atmospheric boundary layer exchange dynamics at flux tower sites, (2) to support regionalscale modeling and upscaling of surface fluxes to continental scales, (3) to validate land-atmosphere coupling in Earth system models, and (4) to support flux footprint modelling, the interpretation of surface fluxes in heterogeneous terrain, and quality control of eddy covariance flux measurements. ● Recommended actions: Adding a suite of atmospheric boundary layer measurements to eddy covariance flux tower sites would allow the Earth science community to address new emerging research questions, to better interpret ongoing flux tower measurements, and would present novel opportunities for collaboration between AmeriFlux scientists and atmospheric and remote sensing scientists. We therefore recommend that (1) a set of instrumentation for continuous atmospheric boundary layer observations be added to a subset of AmeriFlux sites spanning a range of ecosystem types and climate zones, that (2) funding agencies (e.g., Department of Energy, NASA) solicit research on land-atmosphere processes where the benefits of fully integrated atmospheric boundary layer observations can add value to key scientific questions, and that (3) the AmeriFlux Management Project acquires loaner instrumentation for atmospheric boundary layer observations for use in experiments and short-term duration campaigns

    Constructing living buildings: a review of relevant technologies for a novel application of biohybrid robotics

    Get PDF
    Biohybrid robotics takes an engineering approach to the expansion and exploitation of biological behaviours for application to automated tasks. Here, we identify the construction of living buildings and infrastructure as a high-potential application domain for biohybrid robotics, and review technological advances relevant to its future development. Construction, civil infrastructure maintenance and building occupancy in the last decades have comprised a major portion of economic production, energy consumption and carbon emissions. Integrating biological organisms into automated construction tasks and permanent building components therefore has high potential for impact. Live materials can provide several advantages over standard synthetic construction materials, including self-repair of damage, increase rather than degradation of structural performance over time, resilience to corrosive environments, support of biodiversity, and mitigation of urban heat islands. Here, we review relevant technologies, which are currently disparate. They span robotics, self-organizing systems, artificial life, construction automation, structural engineering, architecture, bioengineering, biomaterials, and molecular and cellular biology. In these disciplines, developments relevant to biohybrid construction and living buildings are in the early stages, and typically are not exchanged between disciplines. We, therefore, consider this review useful to the future development of biohybrid engineering for this highly interdisciplinary application.publishe
    • 

    corecore