2,356 research outputs found
An Evaluation of the Effects of a Functional Energy Drink on Post-lunch and Early Evening Driving Performance
This paper reports the results of a pilot study designed to evaluatethe effect of an energy drink on mental performance and driving. 24 healthysubjects were tested after consumption of a placebo or an energy drink in adouble-blind crossover study. Measures included a laboratory test of AdaptiveTracking (AT), and a simulated drive involved a 40 Km motorway route in anadvanced motion-based simulator. Self-report scales of sleepiness revealed asignificant difference between placebo and energy drink. Though both drinksprovided an alerting effect, both the level and duration of the effect observedafter consumption of the energy drink was greater. Performance on the AT taskwas significantly improved. This improvement in hand-eye coordination wasreflected in better lane-keeping performance in the simulated driving task.There was also a consistent tendency when the drivers drank placebo to driveslightly faster in traffic than when drinking the energy drink. Thesepreliminary findings, which demonstrate that consumption of even a relativelysmall volume (250ml) of an energy drink can have an effect on sleepiness, lanekeeping and speed choice in simulated traffic, could have implications forfuture highway safety
Bitopic binding mode of an M1 muscarinic acetylcholine receptor agonist associated with adverse clinical trial outcomes
The realisation of the therapeutic potential of targeting the M1 muscarinic acetylcholine receptor (M1 mAChR) for the treatment of cognitive decline in Alzheimer's disease has prompted the discovery of M1 mAChR ligands showing efficacy in alleviating cognitive dysfunction in both rodents and humans. Among these is GSK1034702, described previously as a potent M1 receptor allosteric agonist, which showed pro-cognitive effects in rodents and improved immediate memory in a clinical nicotine withdrawal test but induced significant side-effects. Here we provide evidence using ligand binding, chemical biology and functional assays to establish that rather than the allosteric mechanism claimed, GSK1034702 interacts in a bitopic manner at the M1 mAChR such that it can concomitantly span both the orthosteric and an allosteric binding site. The bitopic nature of GSK1034702 together with the intrinsic agonist activity and a lack of muscarinic receptor subtype selectivity reported here, all likely contribute to the adverse effects of this molecule in clinical trials. We conclude that these properties, whilst imparting beneficial effects on learning and memory, are undesirable in a clinical candidate due to the likelihood of adverse side effects. Rather, our data supports the notion that "pure" positive allosteric modulators showing selectivity for the M1 mAChR with low levels of intrinsic activity would be preferable to provide clinical efficacy with low adverse responses
Rapid model-guided design of organ-scale synthetic vasculature for biomanufacturing
Our ability to produce human-scale bio-manufactured organs is critically
limited by the need for vascularization and perfusion. For tissues of variable
size and shape, including arbitrarily complex geometries, designing and
printing vasculature capable of adequate perfusion has posed a major hurdle.
Here, we introduce a model-driven design pipeline combining accelerated
optimization methods for fast synthetic vascular tree generation and
computational hemodynamics models. We demonstrate rapid generation, simulation,
and 3D printing of synthetic vasculature in complex geometries, from small
tissue constructs to organ scale networks. We introduce key algorithmic
advances that all together accelerate synthetic vascular generation by more
than 230-fold compared to standard methods and enable their use in arbitrarily
complex shapes through localized implicit functions. Furthermore, we provide
techniques for joining vascular trees into watertight networks suitable for
hemodynamic CFD and 3D fabrication. We demonstrate that organ-scale vascular
network models can be generated in silico within minutes and can be used to
perfuse engineered and anatomic models including a bioreactor, annulus,
bi-ventricular heart, and gyrus. We further show that this flexible pipeline
can be applied to two common modes of bioprinting with free-form reversible
embedding of suspended hydrogels and writing into soft matter. Our synthetic
vascular tree generation pipeline enables rapid, scalable vascular model
generation and fluid analysis for bio-manufactured tissues necessary for future
scale up and production.Comment: 58 pages (19 main and 39 supplement pages), 4 main figures, 9
supplement figure
Recommended from our members
CO2 Capture by Absorption with Potassium Carbonate
The objective of this work is to improve the process for CO{sub 2} capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous K{sub 2}CO{sub 3} promoted by piperazine. The best K{sup +}/PZ solvent, 4.5 m K{sup +}/4.5 m PZ, requires equivalent work of 31.8 kJ/mole CO{sub 2} when used with a double matrix stripper and an intercooled absorber. The oxidative degradation of piperazine or organic acids is reduced significantly by inhibitor A, but the production of ethylenediamine is unaffected. The oxidative degradation of piperazine in 7 m MEA/2 m PZ is catalyzed by Cu{sup ++}. The thermal degradation of MEA becomes significant at 120 C. The solubility of potassium sulfate in MEA/PZ solvents is increased at greater CO{sub 2} loading. The best solvent and process configuration, matrix with MDEA/PZ, offers 22% and 15% energy savings over the baseline and improved baseline, respectively, with stripping and compression to 10 MPa. The energy requirement for stripping and compression to 10 MPa is about 20% of the power output from a 500 MW power plant with 90% CO{sub 2} removal. The stripper rate model shows that a ''short and fat'' stripper requires 7 to 15% less equivalent work than a ''tall and skinny'' one. The stripper model was validated with data obtained from pilot plant experiments at the University of Texas with 5m K{sup +}/2.5m PZ and 6.4m K{sup +}/1.6m PZ under normal pressure and vacuum conditions using Flexipac AQ Style 20 structured packing. Experiments with oxidative degradation at low gas rates confirm the effects of Cu{sup +2} catalysis; in MEA/PZ solutions more formate and acetate is produced in the presence of Cu{sup +2}. At 150 C, the half life of 30% MEA with 0.4 moles CO{sub 2}/mole amine is about 2 weeks. At 100 C, less than 3% degradation occurred in two weeks. The solubility of potassium sulfate in MEA solution increases significantly with CO{sub 2} loading and decreases with MEA concentration. The base case corrosion rate in 5 M MEA/1.2M PZ is 22 mpy. With 1 wt% heat stable salt, the corrosion rate increases by 50% to 160% in the order: thiosulfate< oxalate<acetate<formate. Cupric carbonate is ineffective in the absence of oxygen, but 50 to 250 ppm reduces corrosion to less than 2 mpy in the presence of oxygen
Assessment of the molecular mechanisms of action of novel 4-phenylpyridine-2-one and 6-phenylpyrimidin-4-one allosteric modulators at the M1 muscarinic acetylcholine receptors
Positive allosteric modulators (PAMs) that target the M1 muscarinic acetylcholine (ACh) receptor (M1 mAChR) are potential treatments for cognitive deficits in conditions such as Alzheimer's disease and schizophrenia. We recently reported novel 4-phenylpyridine-2-one and 6-phenylpyrimidin-4-one M1 mAChR PAMs with the potential to display different modes of positive allosteric modulation and/or agonism (Mistry et al., 2016), but their molecular mechanisms of action remain undetermined. The current study compared the pharmacology of three such novel PAMs with the prototypical first-generation PAM, BQCA, in a recombinant Chinese hamster ovary (CHO) cell line stably expressing the human M1 mAChR. Interactions between the orthosteric agonists and the novel PAMs or BQCA suggested their allosteric effects were solely governed by modulation of agonist affinity. The greatest degree of positive co-operativity was observed with higher efficacy agonists, whereas minimal potentiation was observed when the modulators were tested against the lower efficacy agonist, xanomeline. Each PAM was investigated for its effects on the endogenous agonist, ACh, on three different signalling pathways, (ERK1/2 phosphorylation, IP1 accumulation and Ξ²-arrestin-2 recruitment), revealing that the allosteric potentiation generally tracked with the efficiency of stimulus-response coupling and that there was little pathway bias in the allosteric effects. Thus, despite the identification of novel allosteric scaffolds targeting the M1 mAChR, the molecular mechanism of action of these compounds is largely consistent with a model of allostery previously described for BQCA, suggesting that this may be a more generalized mechanism for M1 mAChR PAM effects than previously appreciated
Discovery and Follow-up Observations of the Young Type Ia Supernova 2016coj
The Type~Ia supernova (SN~Ia) 2016coj in NGC 4125 (redshift ) was
discovered by the Lick Observatory Supernova Search 4.9 days after the fitted
first-light time (FFLT; 11.1 days before -band maximum). Our first detection
(pre-discovery) is merely day after the FFLT, making SN 2016coj one
of the earliest known detections of a SN Ia. A spectrum was taken only 3.7 hr
after discovery (5.0 days after the FFLT) and classified as a normal SN Ia. We
performed high-quality photometry, low- and high-resolution spectroscopy, and
spectropolarimetry, finding that SN 2016coj is a spectroscopically normal SN
Ia, but with a high velocity of \ion{Si}{2} 6355 (\,\kms\
around peak brightness). The \ion{Si}{2} 6355 velocity evolution can
be well fit by a broken-power-law function for up to a month after the FFLT. SN
2016coj has a normal peak luminosity ( mag), and it
reaches a -band maximum \about16.0~d after the FFLT. We estimate there to be
low host-galaxy extinction based on the absence of Na~I~D absorption lines in
our low- and high-resolution spectra. The spectropolarimetric data exhibit weak
polarization in the continuum, but the \ion{Si}{2} line polarization is quite
strong () at peak brightness.Comment: Submitte
Recommended from our members
CO2 Capture by Absorption with Potassium Carbonate
The objective of this work is to improve the process for CO{sub 2} capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous K{sub 2}CO{sub 3} promoted by piperazine. The best solvent and process configuration, matrix with MDEA/PZ, offers 22% and 15% energy savings over the baseline and improved baseline, respectively, with stripping and compression to 10 MPa. The energy requirement for stripping and compression to 10 MPa is about 20% of the power output from a 500 MW power plant with 90% CO{sub 2} removal. The stripper rate model shows that a ''short and fat'' stripper requires 7 to 15% less equivalent work than a ''tall and skinny'' one. The stripper model was validated with data obtained from pilot plant experiments at the University of Texas with 5m K{sup +}/2.5m PZ and 6.4m K{sup +}/1.6m PZ under normal pressure and vacuum conditions using Flexipac AQ Style 20 structured packing. Experiments with oxidative degradation at low gas rates confirm the effects of Cu{sup +2} catalysis; in MEA/PZ solutions more formate and acetate is produced in the presence of Cu{sup +2}. At 150 C, the half life of 30% MEA with 0.4 moles CO{sub 2}/mole amine is about 2 weeks. At 100 C, less than 3% degradation occurred in two weeks. The solubility of potassium sulfate in MEA solution increases significantly with CO{sub 2} loading and decreases with MEA concentration. The base case corrosion rate in 5 M MEA/1,2M PZ is 22 mpy. With 1 wt% heat stable salt, the corrosion rate increases by 50% to 160% in the order: thiosulfate< oxalate<acetate<formate. Cupric carbonate is ineffective in the absence of oxygen, but 50 to 250 ppm reduces corrosion to less than 2 mpy in the presence of oxygen
Dynamics of GLP-1R peptide agonist engagement are correlated with kinetics of G protein activation
The glucagon-like peptide-1 receptor (GLP-1R) has broad physiological roles and is a validated target for treatment of metabolic disorders. Despite recent advances in GLP-1R structure elucidation, detailed mechanistic understanding of how different peptides generate profound differences in G protein-mediated signalling is still lacking. Here we combine cryo-electron microscopy, molecular dynamics simulations, receptor mutagenesis and pharmacological assays, to interrogate the mechanism and consequences of GLP-1R binding to four peptide agonists; glucagon-like peptide-1, oxyntomodulin, exendin-4 and exendin-P5. These data reveal that distinctions in peptide N-terminal interactions and dynamics with the GLP-1R transmembrane domain are reciprocally associated with differences in the allosteric coupling to G proteins. In particular, transient interactions with residues at the base of the binding cavity correlate with enhanced kinetics for G protein activation, providing a rationale for differences in G protein-mediated signalling efficacy from distinct agonists
Genome analysis of the necrotrophic fungal pathogens Sclerotinia sclerotiorum and Botrytis cinerea
Sclerotinia sclerotiorum and Botrytis cinerea are closely related necrotrophic plant pathogenic fungi notable for their wide host ranges and environmental persistence. These attributes have made these species models for understanding the complexity of necrotrophic, broad host-range pathogenicity. Despite their similarities, the two species differ in mating behaviour and the ability to produce asexual spores. We have sequenced the genomes of one strain of S. sclerotiorum and two strains of B. cinerea. The comparative analysis of these genomes relative to one another and to other sequenced fungal genomes is provided here. Their 38β39 Mb genomes include 11,860β14,270 predicted genes, which share 83% amino acid identity on average between the two species. We have mapped the S. sclerotiorum assembly to 16 chromosomes and found large-scale co-linearity with the B. cinerea genomes. Seven percent of the S. sclerotiorum genome comprises transposable elements compared t
DREADD agonist 21 is an effective agonist for muscarinic-based DREADDs in vitro and in vivo
Chemogenetic tools such as designer receptors exclusively activated by designer drugs (DREADDs) are routinely used to modulate neuronal and non-neuronal signaling and activity in a relatively noninvasive manner. The first generation of DREADDs were templated from the human muscarinic acetylcholine receptor family and are relatively insensitive to the endogenous agonist acetylcholine but instead are activated by clozapine-N-oxide (CNO). Despite the undisputed success of CNO as an activator of muscarinic DREADDs, it has been known for some time that CNO is subject to a low rate of metabolic conversion to clozapine, raising the need for alternative chemical actuators of muscarinic-based DREADDs. Here we show that DREADD agonist 21 (C21) (11-(1-piperazinyl)-5H-dibenzo[b,e][1,4]diazepine) is a potent and selective agonist at both excitatory (hM3Dq) and inhibitory (hM4Di) DREADDs and has excellent bioavailability, pharmacokinetic properties, and brain penetrability. We also show that C21-induced activation of hM3Dq and hM4Di in vivo can modulate bidirectional feeding in defined circuits in mice. These results indicate that C21 represents an alternative to CNO for in vivo studies where metabolic conversion of CNO to clozapine is a concern
- β¦