Multilayer Modelling of Lubricated Contacts: A New Approach Based on a Potential Field Description

A first integral approach, derived in an analogous fashion to Maxwell’s use of potential fields, is employed to investigate the flow characteristics, with a view to minimising friction, of shear-driven fluid motion between rigid surfaces in parallel alignment as a model for a lubricated joint, whether naturally occurring or engineered replacement. For a viscous bilayer arrangement comprised of immiscible liquids, it is shown how the flow and the shear stress along the separating interface is influenced by the mean thickness of the layers and the ratio of their respective viscosities. Considered in addition, is how the method can be extended for application to the more challenging problem of when one, or both, of the layers is a viscoelastic material

Optical and EPR spectroscopy of Er3+ in lithium yttrium borate, Li6Y(BO3)3:Er single crystals

The energy levels of Er3+ ions have been determined in lithium yttrium borate (Li6Y(BO3)3) single crystals in a wide spectral range between 6000 and 40000 cm-1 together with an analysis of the ground state, using optical and EPR spectroscopy. The crystal field splittings of the 4I15/2 ground state and those of nearly all excited states up to the 4D7/2 manifold have been obtained at low temperature from luminescence (T = 5 K) and absorption (T = 9 K) measurements, respectively. The numbers of experimentally observed Stark sublevels agree well with those expected theoretically for Er3+ ions occupying a single low symmetry (C1) site. A full set of g- and 167Er hyperfine tensor parameters are presented for the ground state characterized by EPR; the measured Orbach-type spin-relaxation rates viz. the involved activation energies correspond to the optically derived lowest excited sublevels

Numerical modeling of lathanide-ion doped fibre lasers operating within mid-infrared wavelength region

We discuss the numerical modelling of lanthanide-ion doped chalcogenide glass fibre lasers for operation in the mid-infrared wavelength region. We extract the modelling parameters from emission and absorption measurements using Judd-Ofelt and McCumber theory. Numerical algorithms are developed based on the experimentally extracted fibre parameters. The simulation results predict lasing with slope efficiency of at least 20 % provided, that the fibre loss can be kept at the level of 1 dB/m or less

A regional benthic fauna assessment method for the Southern North Sea using Margalef diversity and reference value modelling

The aims of this study are to develop an optimized method for regional benthic fauna assessment of the Southern North Sea which (a) is sensitive and precise (quantified as the slope and the R2 value of the pressure-impact relationships, respectively) for the anthropogenic pressures bottom fishing and organic enrichment, (b) is suitable for estimating and modelling reference values, (c) is transparent, (d) can be efficiently applied using dedicated software; and to apply this method to benthic data from the Southern North Sea. Margalef diversity appeared to be the best performing benthic index regarding these criteria, even better than several Multi-Metric Indices (MMIs) containing e.g. AMBI (AZTI Marine Biotic Index) and ITI (Infaunal Trophic Index). Therefore, this relatively simple and very practical index, including a new reference value estimation and modelling method, and BENMMI software were selected as a common OSPAR (Oslo Paris convention) method for the benthic fauna assessment of the Southern North Sea. This method was applied to benthic fauna data from the Southern North Sea collected during the period 2010–2015. The results in general show lower normalized Margalef values in coastal areas, and higher normalized Margalef values in deeper offshore areas. The following benthic indices were compared in this study: species richness, Margalef diversity, SNA index, Shannon index, PIE index, AMBI, ITI. For each assessment area, the least disturbed benthic dataset was selected as an adjacent 6 year period with, on average, the highest Margalef diversity values. For these datasets, the reference values were primarily set as the 99th percentile values of the respective indices. This procedure results in the highest stable reference values that are not outliers. In addition, a variable percentile method was developed, in which the percentile value is adjusted to the average bottom fishing pressure (according to data from the International Council for the Exploration of the Sea, ICES) in the period 2009–2013. The adjusted percentile values were set by expert judgement, at 75th (low fishing pressure), 95th (medium fishing pressure) and 99th (high fishing pressure) percentile. The estimated reference values for Margalef diversity correlate quite well with the median depth of the assessment areas using a sigmoid model (pseudo-R2 = 0.86). This relationship between depth and Margalef diversity was used to estimate reference values in case an assessment area had insufficient benthic data .For testing the effects of bottom fishing pressure, normalized index values (NIV; index value divided by reference value) were used. The rationale for using NIVs is the assumption that, although a certain level of bottom fishing pressure will have a larger absolute effect on more biodiverse benthic communities in deeper waters than on more robust and less biodiverse coastal benthic communities, the relative effects (tested using NIVs) are comparable. A clear exponentially decreasing relationship (R2 = 0.26–0.27, p 2 cm, respectively) and normalized Margalef diversity values, with an asymptotic normalized Margalef value of 0.45 at a subsurface fishing activity >2.3 sweeps/year. This asymptotic value is predominantly found in coastal waters, and probably shows that the naturally more robust coastal benthic communities have been transformed into resilient benthic communities, which rapidly recover from increasing fishing pressure

Barriers encountered during enrollment in an internet-mediated randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Online technology is a promising resource for conducting clinical research. While the internet may improve a study's reach, as well as the efficiency of data collection, it may also introduce a number of challenges for participants and investigators. The objective of this research was to determine the challenges that potential participants faced during the enrollment phase of a randomized controlled intervention trial of Stepping Up to Health, an internet-mediated walking program that utilized a multi-step online enrollment process.</p> <p>Methods</p> <p>We conducted a quantitative content analysis of 623 help tickets logged in a participant management database during the enrollment phase of a clinical trial investigating the effect of an automated internet-mediated walking intervention. Qualitative coding was performed by two trained coders, and 10% of the sample was coded by both coders to determine inter-coder reliability. Quantitative analyses included standard descriptive statistics on ticket characteristics and theme frequency, and a Poisson regression analysis identified characteristics of potential participants who reported more frequent problems during enrollment.</p> <p>Results</p> <p>In total, 880 potential participants visited the study website and 80% completed the enrollment screening. Of the potential participants who visited the study website, 38% had help tickets logged in the participant management database. The total number of help tickets associated with individual potential participants ranged from 0 to 7 (M = .71). Overall, 46% of help tickets were initiated by email and 54% were initiated by phone. The most common help ticket theme was issues related to the study process (48%). The next most prominent theme was discussion related to obtaining medical clearance (34%), followed by issues related to pedometers and uploading (31%). Older individuals, women, and those with lower self-rated internet ability were more likely to report problems during the enrollment process.</p> <p>Conclusion</p> <p>Prospective participants in an online clinical trial encountered a number of barriers to enrollment that led them to request help from study staff. Questions about the complex enrollment process itself were common. In a complex multi-step enrollment process, providing personalized feedback to potential participants indicating their status within the enrollment process may be beneficial.</p> <p>Trial Registration</p> <p>ClinicalTrials.gov NCT00729040</p

A pilot Internet "Value of Health" Panel: recruitment, participation and compliance

Objectives To pilot using a panel of members of the public to provide preference data via the Internet Methods A stratified random sample of members of the general public was recruited and familiarised with the standard gamble procedure using an Internet based tool. Health states were perdiodically presented in "sets" corresponding to different conditions, during the study. The following were described: Recruitment (proportion of people approached who were trained); Participation (a) the proportion of people trained who provided any preferences and (b) the proportion of panel members who contributed to each "set" of values; and Compliance (the proportion, per participant, of preference tasks which were completed). The influence of covariates on these outcomes was investigated using univariate and multivariate analyses. Results A panel of 112 people was recruited. 23% of those approached (n = 5,320) responded to the invitation, and 24% of respondents (n = 1,215) were willing to participate (net = 5.5%). However, eventual recruitment rates, following training, were low (2.1% of those approached). Recruitment from areas of high socioeconomic deprivation and among ethnic minority communities was low. Eighteen sets of health state descriptions were considered over 14 months. 74% of panel members carried out at least one valuation task. People from areas of higher socioeconomic deprivation and unmarried people were less likely to participate. An average of 41% of panel members expressed preferences on each set of descriptions. Compliance ranged from 3% to 100%. Conclusion It is feasible to establish a panel of members of the general public to express preferences on a wide range of health state descriptions using the Internet, although differential recruitment and attrition are important challenges. Particular attention to recruitment and retention in areas of high socioeconomic deprivation and among ethnic minority communities is necessary. Nevertheless, the panel approach to preference measurement using the Internet offers the potential to provide specific utility data in a responsive manner for use in economic evaluations and to address some of the outstanding methodological uncertainties in this field

The Effect of Epstein-Barr Virus Latent Membrane Protein 2 Expression on the Kinetics of Early B Cell Infection

Infection of human B cells with wild-type Epstein-Barr virus (EBV) in vitro leads to activation and proliferation that result in efficient production of lymphoblastoid cell lines (LCLs). Latent Membrane Protein 2 (LMP2) is expressed early after infection and previous research has suggested a possible role in this process. Therefore, we generated recombinant EBV with knockouts of either or both protein isoforms, LMP2A and LMP2B (Δ2A, Δ2B, Δ2A/Δ2B) to study the effect of LMP2 in early B cell infection. Infection of B cells with Δ2A and Δ2A/Δ2B viruses led to a marked decrease in activation and proliferation relative to wild-type (wt) viruses, and resulted in higher percentages of apoptotic B cells. Δ2B virus infection showed activation levels comparable to wt, but fewer numbers of proliferating B cells. Early B cell infection with wt, Δ2A and Δ2B viruses did not result in changes in latent gene expression, with the exception of elevated LMP2B transcript in Δ2A virus infection. Infection with Δ2A and Δ2B viruses did not affect viral latency, determined by changes in LMP1/Zebra expression following BCR stimulation. However, BCR stimulation of Δ2A/Δ2B cells resulted in decreased LMP1 expression, which suggests loss of stability in viral latency. Long-term outgrowth assays revealed that LMP2A, but not LMP2B, is critical for efficient long-term growth of B cells in vitro. The lowest levels of activation, proliferation, and LCL formation were observed when both isoforms were deleted. These results suggest that LMP2A appears to be critical for efficient activation, proliferation and survival of EBV-infected B cells at early times after infection, which impacts the efficient long-term growth of B cells in culture. In contrast, LMP2B did not appear to play a significant role in these processes, and long-term growth of infected B cells was not affected by the absence of this protein. © 2013 Wasil et al

Seismic Wave Attenuation in Carbonates

The effect of pore fluids on seismic wave attenuation in carbonate rocks is important for interpreting remote sensing observations of carbonate reservoirs undergoing enhanced oil recovery. Here we measure the elastic moduli and attenuation in the laboratory for five carbonate samples with 20% to 30% porosity and permeability between 0.03 and 58.1 mdarcy. Contrary to most observations in sandstones, bulk compressibility losses dominate over shear wave losses for dry samples and samples fully saturated with either liquid butane or brine. This observation holds for four out of five samples at seismic (10–1000 Hz) and ultrasonic frequencies (0.8 MHz) and reservoir pressures. Attenuation modeled from the modulus data using Cole-Cole relations agrees in that the bulk losses are greater than the shear losses. On average, attenuation increases by 250% when brine substitutes a light hydrocarbon in these carbonate rocks. For some of our samples, attenuation is frequency-dependent, but in the typical exploration frequency range (10–100 Hz), attenuation is practically constant for the measured samples

All-fiber, single-mode spectral beam combining of high power Tm-doped fiber lasers

Signal beam combining of Tm-doped fiber lasers can increase the laser output power while simultaneously maintaining the single mode beam quality. We demonstrate an all-fiber integrated dual-wavelength Tm-doped fiber laser with an output power of 36 W by using the spectral beam combining method. The constituent lasers are operating at the wavelengths 1949 and 1996 nm and an in-house-made WDM is used for combination of these two different wavelengths. All-fiber truly single mode power combining is demonstrated for the first time in this wavelength region. © OSA 2015