Decolourisation of Acid orange 7 in a microbial fuel cell with a laccase-based biocathode: Influence of mitigating pH changes in the cathode chamber

Biocathodes may be a suitable replacement of platinum in microbial fuel cells (MFCs) if the cost of MFCs is to be reduced. However, the use of enzymes as bio-cathodes is fraught with loss of activity as time progresses. A possible cause of this loss in activity might be pH increase in the cathode as pH gradients in MFCs are well known. This pH increase is however, accompanied by simultaneous increase in salinity; therefore salinity may be a confounding variable. This study investigated various ways of mitigating pH changes in the cathode of MFCs and their effect on laccase activity and decolourisation of a model azo dye Acid orange 7 in the anode chamber. Experiments were run with catholyte pH automatically controlled via feedback control or by using acetate buffers (pH 4.5) of various strength (100 mM and 200 mM), with CMI7000 as the cation exchange membrane. A comparison was also made between use of CMI7000 and Nafion 117 as the transport properties of cations for both membranes (hence their potential effects on pH changes in the cathode) are different

Degradation of azo dye (Acid orange 7) in a microbial fuel cell: comparison between anodic microbial-mediated reduction and cathodic laccase-mediated oxidation

More than 80 per cent of wastewater from industries is discharged into receiving water bodies without any pollution control. Microbial fuel cells (MFCs) are a promising technology for the simultaneous treatment of wastewater and electricity production. With regard to azo-dye containing wastewater (e.g. from textile manufacturing), the dye may be fed via the anode chamber containing electrochemically active bacteria or via the cathode chamber containing laccase enzyme as catalyst for oxygen reduction. This study investigated which of the two approaches is the best with regard to rate of decolourization of the dye (Acid orange 7), COD reduction and electricity production. The power density was higher for the MFCDye cathode (50±4 mW m-2, COD reduction 80.4±1.2%) compared with 42.5±2.6 mW m-2 (COD reduction 69±2%) for MFCDye anode. The time required for decolourization was longer in the MFCDye anode (Shewanella oneidensis) where only 20% decolourization was obtained after 24 h compared to 80% for the MFCDye cathode. The anodic dye degradation products were unstable when exposed to air resulting in regaining of colour. In case of degradation by laccase in the cathode chamber, the decolourization products were stable and simpler in chemical structure as determined by GC-MS. This work suggests that feeding azo dyes in cathode chambers of MFCs containing laccase is a better way of treating the dyes compared to the commonly used approach of feeding the dye in the anode chamber provided enzyme activity can be sustained

Utilization of single-chamber microbial fuel cells as renewable power sources for electrochemical degradation of nitrogen-containing organic compounds

By employing promising single-chamber microbial fuel cells (MFCs) as renewable power sources, an aerated electrochemical system is proposed and for nitrogen-containing organic compounds (pyridine and methyl orange) removals. Carbon felt performed the best as electrode material while lower initial contaminant concentration and lower initial pH value could improve the performance. A degradation efficiency of 82.9% for pyridine was achieved after 360 min electrolysis with its initial concentration of 200 mg/L, initial pH of 3.0 and applied voltage of 700 mV. Mechanisms study implied that indirect electrochemical oxidation by generated hydrogen peroxide was responsible for their degradation. This study provides an alternative utilization form of low bioelectricity from MFCs and reveals that applying it to electrochemical process is highly-efficient as well as cost-effective for degradation of nitrogen-containing organic compounds. (C) 2015 Elsevier B.V. All rights reserved.National Natural Science Foundation of China (NSFC) [21307117, 41440025]; Research Fund for the Doctoral Program of Higher Education of China [20120022120005]; Beijing Excellent Talent Training Project [2013D009015000003]; Beijing Higher Education Young Elite Teacher Project [YETP0657]; Fundamental Research Funds for the Central Universities [2652015226, 2652015131]SCI(E)[email protected]

Simultaneous Decolorization and Bioelectricity Generation in a Dual Chamber Microbial Fuel Cell Using Electropolymerized-Enzymatic Cathode

Effect of cathodic enzymatic decolorization of reactive blue 221 (RB221) on the performance of a dual-chamber microbial fuel cell (MFC) was investigated. Immobilized laccase on the surface of a modified graphite electrode was used in the cathode compartment in order to decolorize the azo dye and enhance the oxygen reduction reaction. First, methylene blue which is an electroactive polymer was electropolymerized on the surface of a graphite bar to prepare the modified electrode. Utilization of the modified electrode with no enzyme in the MFC increased the power density up to 57% due to the reduction of internal resistance from 1000 to 750 Ω. Using the electropolymerized-enzymatic cathode resulted in 65% improvement of the power density and a decolorization efficiency of 74%. Laccase could act as a biocatalyst for oxygen reduction reaction along with catalyzing RB221 decolorization. Treatment of RB221 with immobilized laccase reduced its toxicity up to 5.2%. Degradation products of RB221 were identified using GC–MS, and the decomposition pathway was proposed. A discussion was also provided as to the mechanism of dye decolorization on the enhancement of the MFC performance