A Practical Environment to Apply Model-Driven Web Engineering

The application of a model-driven paradigm in the development of Web Systems has yielded very good research results. Several research groups are defining metamodels, transformations, and tools which offer a suitable environment, known as model-driven Web engineering (MDWE). However, there are very few practical experiences in real Web system developments using real development teams. This chapter presents a practical environment of MDWE based on the use of NDT (navigational development techniques) and Java Web systems, and it provides a practical evaluation of its application within a real project: specialized Diraya.Ministerio de Educación y Ciencia TIN2007-67843-C06-03Ministerio de Educación y Ciencia TIN2007-30391-

Phenotypic, molecular characterization, antimicrobial susceptibility and draft genome sequence of Corynebacterium argentoratense strains isolated from clinical samples

During a 12-year period we isolated five Corynebacterium argentoratense strains identified by phenotypic methods, including the use of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF) and 16S rRNA gene sequencing. In addition, antimicrobial susceptibility was determined, and genome sequencing for the detection of antibiotic resistance genes was performed. The organisms were isolated from blood and throat cultures and could be identified by all methods used. All strains were resistant to cotrimoxazole, and resistance to β-lactams was partly present. Two strains were resistant to erythromycin and clindamycin. The draft genome sequences of theses isolates revealed the presence of the erm(X) resistance gene that is embedded in the genetic structure of the transposable element Tn5423. Although rarely reported as a human pathogen, C. argentoratense can be involved in bacteraemia and probably in other infections. Our results also show that horizontal transfer of genes responsible for antibiotic resistance is occurring in this species.Supported in part by the Gerencia Regional de Salud, Junta de Castilla y León, Spain (research project GRS 698/A/2011

Morphology of Platinum Electrodeposits in the Three-Dimensional Sublayer to Full Layer Range Produced under Different Potential Modulations on Highly Oriented Pyrolytic Graphite

The topography of platinum electrodes produced by electrodeposition (19 to 200 mC cm-2) on highly oriented pyrolytic graphite (HOPG) under different potential modulations was investigated by atomic force microscopy, scanning tunneling microscopy, and H-atom electrosorption voltammetry. To modulate electrodeposition, (i) triangular potential cycling at 0.1 V s-1, (ii) a linear cathodic potential at 0.1 V s-1 and anodic potential step cycling, and (iii) square wave potential cycling at 5000 Hz were utilized. AFM and STM imaging showed that at lower platinum loading the HOPG surface was partially covered by a 3D sublayer of platinum. Electrodes produced by procedure (i) were made of faceted platinum aggregates of about 200 nm and nanoclusters in the range of 5−20 nm; those that resulted from procedure (ii) consisted of anisotropic aggregates of nanoclusters arranged as quasi-parallel domains. These electrodes from (i) and (ii) behaved as fractal objects. The electrodes resulting from procedure (iii) exhibited a flat surface that behaved as a Euclidean object. For all WEs, as the platinum loading was increased the HOPG surface was fully covered by a thin 3D layer of platinum aggregates produced by electrodeposition and coalescence phenomena. Large platinum loading led to electrodes with fractal geometry. Statistical parameters (root-mean-square height, skewedness, kurtosis, anisotropy, Abbot curve, number of protrusions and valleys, and fractal dimension) were obtained from the analysis of AFM and STM imaging data. Platinum electrodeposition coupled to either H-adatom formation for procedures (i) and (ii) or phonon dispersion for (iii) was involved in the surface atom rearrangements related to electrofaceting. The H-adatom electrosorption voltammetry data were used to evaluate the real electrode surface area via the voltammetric charge and to advance a tentative explanation of the contribution of the different crystallographic facets to the global electrochemical process dominated by weak H−Pt adsorption interactions.Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicada

Analysis of the Yield of Radish (Raphanus Sativus L.) Fertilized with Compost Based on Organic Waste from Markets and its Relationship with its Stomatal Density

For higher yields in vegetable cultivation, the availability of soil nutrients must be improved. Therefore, the aim of this research was to establish the relationship between stomatal density and the yield of the radish crop fertilized with compost made from organic market waste. A completely randomized block design was used, which consisted of 3 blocks and 5 treatments, which were T1, T2, T3, T4 and T5 with 00, 10, 15, 15, 20 and 25 g compost/plant respectively. The physical characteristics of the plants were evaluated from sowing to harvest and the data obtained were processed by analysis of variance and Duncan's test. Chemical analysis of the compost and soil was carried out, as well as a foliar analysis to determine the nutrient concentration by treatment. The results determined that the treatment (T4) stood out in plant length with 28.96 cm, plant weight with 43.33 g, yield of 10.82 t/ha and bulb diameter of 3.92 cm; likewise, in the concentration of nutrients in the leaves, the treatment (T5) highlighted in N with 5.94%, Ca 4.84%, Mg 1.29%, Zn 64.58 ppm and a stomatal density of 642 stomas/mm2. It is concluded that, at an adequate dose of compost, the concentration of nutrients increases, as well as the stomatal density, resulting in higher yields

Critical review of technologies for the on-site treatment of hospital wastewater: From conventional to combined advanced processes

In this work, a raw and low cost mineral, ilmenite (FeTiO3), has been tested for the first time as a photocatalyst paired with peroxymonosulfate (HSO5-; PMS) for the inactivation of Enterococcus faecalis as an alternative to conventional treatments to disinfect wastewater for reuse. The influence of some operational parameters such as reagent dosage, catalyst concentration, initial pH, or flow rate was also studied and optimized. After several tests, the scarce pure photoactivity under UV-A was remarked by ilmenite because of its high iron content, which favors photogenerated charge recombination. However, ilmenite activity was highly promoted when combined with low concentrations of PMS and UV-A light, reaching total inactivation of Enterococcus faecalis in 120 min. Quenching tests were performed using methanol, tert-butyl alcohol, furfuryl alcohol, and Cu(II) to assess the main reactive species involved in the disinfection process determining the critical role of both HO·and SO4·- radicals in the process. Finally, the influence of the water matrix was also evaluated by studying the effect of water hardness and the presence of nutrients on the system. Overall, the PMS/Ilmenite/UV-A system yielded promising results with a total removal of Enterococcus faecalis in 120 min. However, it also showed the need for further study and understanding of the disinfection mechanism to achieve the same level of performance in real wastewaterThe "Comunidad de Madrid" supported this research through REMTAVARES S2013/MAE-2716 and S2018/EMT-434

A new view of electrochemistry at highly oriented pyrolytic graphite

Major new insights on electrochemical processes at graphite electrodes are reported, following extensive investigations of two of the most studied redox couples, Fe(CN)64–/3– and Ru(NH3)63+/2+. Experiments have been carried out on five different grades of highly oriented pyrolytic graphite (HOPG) that vary in step-edge height and surface coverage. Significantly, the same electrochemical characteristic is observed on all surfaces, independent of surface quality: initial cyclic voltammetry (CV) is close to reversible on freshly cleaved surfaces (>400 measurements for Fe(CN)64–/3– and >100 for Ru(NH3)63+/2+), in marked contrast to previous studies that have found very slow electron transfer (ET) kinetics, with an interpretation that ET only occurs at step edges. Significantly, high spatial resolution electrochemical imaging with scanning electrochemical cell microscopy, on the highest quality mechanically cleaved HOPG, demonstrates definitively that the pristine basal surface supports fast ET, and that ET is not confined to step edges. However, the history of the HOPG surface strongly influences the electrochemical behavior. Thus, Fe(CN)64–/3– shows markedly diminished ET kinetics with either extended exposure of the HOPG surface to the ambient environment or repeated CV measurements. In situ atomic force microscopy (AFM) reveals that the deterioration in apparent ET kinetics is coupled with the deposition of material on the HOPG electrode, while conducting-AFM highlights that, after cleaving, the local surface conductivity of HOPG deteriorates significantly with time. These observations and new insights are not only important for graphite, but have significant implications for electrochemistry at related carbon materials such as graphene and carbon nanotubes

PETER building : an example of integration of renewable energies into the edification

El objetivo principal del presente artículo es mostrar y dar a conocer las aplicaciones de la edificación bioclimática, sus ventajas y características. Para ello, se muestra el proyecto de Construcción de un Edificio Inteligente de “Energía Convencional Cero” (“Bioclimático”) de unos 1700 m2 en el Campus de la Universidad de Extremadura en Badajoz. Se pondrán en práctica los conceptos sobre ahorro y eficiencia energética en la edificación, así como la integración de las energías renovables en el edificio PETER. Además se mostrará como es posible en ciudades de clima extremo (como es la ciudad de Badajoz, con necesidad de calefacción en invierno y de refrigeración en verano), climatizar edificios aplicando medidas que minimizan el consumo energético. Finalmente, se lleva a cabo un proceso de simulación energética que permite comprobar el comportamiento energético del edificio.The present article is intended to show the main features, advantages and applications of bioclimatic architecture as well as the the integration of renewable energies ito the edification. For such purpose, the Project of an approximate 1 700 m2 intelligent zeroconventional- energy (“Bioclimatic”) building (referred to as PETER Project (Experimental Transborder Park on Renewable Energies)), to be located in the Campus of the University of Extremadura in Badajoz, is described. Specific principles directly relating building design, like energy saving, energy efficient and integration of renewable energy sources, are put in practice. In addition will be shown as it is possible in cities of extreme climate (as it is the city of Badajoz, with necessity of heating in winter and refrigeration in summer), to acclimate buildings applying measures that diminish the power consumption. Finally, a description of the energy response of the building is carried out via computer simulation techniques

Unraveling the effect of silent, intronic and missense mutations on VWF splicing: contribution of next generation sequencing in the study of mRNA

Large studies in von Willebrand disease patients, including Spanish and Portuguese registries, led to identification of >250 different mutations. It is a challenge to determine the pathogenic effect of potential splice site mutations on VWF mRNA. This study aimed to elucidate the true effects of 18 mutations on VWF mRNA processing, investigate the contribution of next-generation sequencing to in vivo mRNA study in von Willebrand disease, and compare the findings with in silico prediction. RNA extracted from patient platelets and leukocytes was amplified by RT-PCR and sequenced using Sanger and next generation sequencing techniques. Eight mutations affected VWF splicing: c.1533+1G>A, c.5664+2T>C and c.546G>A (p.=) prompted exon skipping; c.3223-7_3236dup and c.7082-2A>G resulted in activation of cryptic sites; c.3379+1G>A and c.7473G>A (p.=) demonstrated both molecular pathogenic mechanisms simultaneously; and the p.Cys370Tyr missense mutation generated two aberrant transcripts. Of note, the complete effect of 3 mutations was provided by next generation sequencing alone because of low expression of the aberrant transcripts. In the remaining 10 mutations, no effect was elucidated in the experiments. However, the differential findings obtained in platelets and leukocytes provided substantial evidence that 4 of these would have an effect on VWF levels. In this first report using next generation sequencing technology to unravel the effects of VWF mutations on splicing, the technique yielded valuable information. Our data bring to light the importance of studying the effect of synonymous and missense mutations on VWF splicing to improve the current knowledge of the molecular mechanisms behind von Willebrand disease.info:eu-repo/semantics/publishedVersio

Probing quantum gravity using photons from a flare of the active galactic nucleus Markarian 501 observed by the MAGIC telescope

We analyze the timing of photons observed by the MAGIC telescope during a flare of the active galactic nucleus Mkn 501 for a possible correlation with energy, as suggested by some models of quantum gravity (QG), which predict a vacuum refractive index \simeq 1 + (E/M_{QGn})^n, n = 1,2. Parametrizing the delay between gamma-rays of different energies as \Delta t =\pm\tau_l E or \Delta t =\pm\tau_q E^2, we find \tau_l=(0.030\pm0.012) s/GeV at the 2.5-sigma level, and \tau_q=(3.71\pm2.57)x10^{-6} s/GeV^2, respectively. We use these results to establish lower limits M_{QG1} > 0.21x10^{18} GeV and M_{QG2} > 0.26x10^{11} GeV at the 95% C.L. Monte Carlo studies confirm the MAGIC sensitivity to propagation effects at these levels. Thermal plasma effects in the source are negligible, but we cannot exclude the importance of some other source effect.Comment: 12 pages, 3 figures, Phys. Lett. B, reflects published versio