Maximal respiratory static pressures in patients with different stages of COPD severity

<p>Abstract</p> <p>Background</p> <p>In this study, we analyzed maximal inspiratory pressure (MIP) and maximal expiratory pressure (MEP) values in a stable COPD population compared with normal subjects. We evaluated the possible correlation between functional maximal respiratory static pressures and functional and anthropometric parameters at different stages of COPD. Furthermore, we considered the possible correlation between airway obstruction and MIP and MEP values.</p> <p>Subject and methods</p> <p>110 patients with stable COPD and 21 age-matched healthy subjects were enrolled in this study. Patients were subdivided according to GOLD guidelines: 31 mild, 39 moderate and 28 severe.</p> <p>Results</p> <p>Both MIP and MEP were lower in patients with severe airway impairment than in normal subjects. Moreover, we found a correlation between respiratory muscle function and some functional and anthropometric parameters: FEV₁(forced expiratory volume in one second), FVC (forced vital capacity), PEF (peak expiratory flow), TLC (total lung capacity) and height. MIP and MEP values were lower in patients with severe impairment than in patients with a slight reduction of FEV₁.</p> <p>Conclusion</p> <p>The measurement of MIP and MEP indicates the state of respiratory muscles, thus providing clinicians with a further and helpful tool in monitoring the evolution of COPD.</p

An intervention to improve outcomes of falls in dementia: the DIFRID mixed-methods feasibility study:A mixed methods study to develop and assess the feasibility of the DIFRID intervention

Background : Fall-related injuries are a significant cause of morbidity and mortality in people with dementia (PWD). There is presently little evidence to guide the management of such injuries, and yet there are potentially substantial benefits to be gained if the outcome of these injuries could be improved. This study aimed to design an appropriate new healthcare intervention for PWD following a fall and to assess the feasibility of its delivery in the UK National Health Service. Objective (s): To determine whether it is possible to design an intervention to improve outcomes of falls in dementia; to investigate the feasibility and acceptability of the DIFRID intervention; to investigate the feasibility of a future randomised controlled trial (RCT) and data collection tools needed to evaluate the effectiveness and efficiency of the DIFRID intervention. Design : Mixed-methods feasibility study. Methods : A systematic review (using Cochrane methodology) and realist review (using RAMESES methodology) explored the existing evidence base and developed programme theories. Searches were carried out in Nov 2015 (updated Jan 2018) for effectiveness studies and August 2016 for economic studies. A prospective observational study identified service use via participant diary completion. Qualitative methods (semi-structured interviews, focus groups, and observation) were used to explore: current practice; stakeholder perspectives of the health and social care needs of PWD following a fall; ideas for intervention; and barriers and facilitators to change. Each of these datasets informed intervention development, via Delphi consensus methods. Finally, a single-arm feasibility study with embedded process evaluation was conducted. Setting : Community. Participants : PWD presenting with falls needing healthcare attention in each setting at 3 sites and their carers. Professionals delivering the intervention, responsible for training and supervision and members of the intervention team. Professionals responsible for approaching and recruiting participants. Interventions: A complex multidisciplinary therapy intervention. Physiotherapists, occupational therapists, and support workers delivered up to 22 sessions of tailored activities in the PWD’s home or local area over a period of 12 weeks. Main outcome measures: Assessment of feasibility of study procedures; assessment of the acceptability, feasibility and fidelity of intervention components; assessment of suitability and acceptability of outcome measures for PWD and carers (number of falls; quality of life; fear of falling; activities of daily living; goal setting; health utilisation; carer burden). Results : A multidisciplinary intervention delivered in PWDs’ own homes was designed based on qualitative work, realist review and recommendations of the consensus panel. The intervention was delivered to 11 PWD. The study suggested that the intervention is both feasible and acceptable to stakeholders. A number of modifications was recommended to address some of the issues arising during feasibility testing. Measurement of outcome measures was successful. Limitations : Recruitment to the feasibility study was lower than expected and therefore the intervention needs to be tested with a larger number of PWD. Conclusions : The study has highlighted the feasibility of delivering a creative, tailored, individual approach to intervention for PWD following a fall. Although the intervention required greater investment of time than usual practice, many staff valued the opportunity to work more closely with PWD and carers. Future work : We conclude that further research is now needed to refine this intervention in the context of a pilot randomised controlled trial

Search for time-dependent B0s - B0s-bar oscillations using a vertex charge dipole technique

We report a search for B0s - B0s-bar oscillations using a sample of 400,000 hadronic Z0 decays collected by the SLD experiment. The analysis takes advantage of the electron beam polarization as well as information from the hemisphere opposite that of the reconstructed B decay to tag the B production flavor. The excellent resolution provided by the pixel CCD vertex detector is exploited to cleanly reconstruct both B and cascade D decay vertices, and tag the B decay flavor from the charge difference between them. We exclude the following values of the B0s - B0s-bar oscillation frequency: Delta m_s < 4.9 ps-1 and 7.9 < Delta m_s < 10.3 ps-1 at the 95% confidence level.Comment: 18 pages, 3 figures, replaced by version accepted for publication in Phys.Rev.D; results differ slightly from first versio

Toward optimal implementation of cancer prevention and control programs in public health: A study protocol on mis-implementation

Abstract Background Much of the cancer burden in the USA is preventable, through application of existing knowledge. State-level funders and public health practitioners are in ideal positions to affect programs and policies related to cancer control. Mis-implementation refers to ending effective programs and policies prematurely or continuing ineffective ones. Greater attention to mis-implementation should lead to use of effective interventions and more efficient expenditure of resources, which in the long term, will lead to more positive cancer outcomes. Methods This is a three-phase study that takes a comprehensive approach, leading to the elucidation of tactics for addressing mis-implementation. Phase 1: We assess the extent to which mis-implementation is occurring among state cancer control programs in public health. This initial phase will involve a survey of 800 practitioners representing all states. The programs represented will span the full continuum of cancer control, from primary prevention to survivorship. Phase 2: Using data from phase 1 to identify organizations in which mis-implementation is particularly high or low, the team will conduct eight comparative case studies to get a richer understanding of mis-implementation and to understand contextual differences. These case studies will highlight lessons learned about mis-implementation and identify hypothesized drivers. Phase 3: Agent-based modeling will be used to identify dynamic interactions between individual capacity, organizational capacity, use of evidence, funding, and external factors driving mis-implementation. The team will then translate and disseminate findings from phases 1 to 3 to practitioners and practice-related stakeholders to support the reduction of mis-implementation. Discussion This study is innovative and significant because it will (1) be the first to refine and further develop reliable and valid measures of mis-implementation of public health programs; (2) bring together a strong, transdisciplinary team with significant expertise in practice-based research; (3) use agent-based modeling to address cancer control implementation; and (4) use a participatory, evidence-based, stakeholder-driven approach that will identify key leverage points for addressing mis-implementation among state public health programs. This research is expected to provide replicable computational simulation models that can identify leverage points and public health system dynamics to reduce mis-implementation in cancer control and may be of interest to other health areas

Manovacuometria realizada por meio de traqueias de diferentes comprimentos

Manovacuometry is a simple, fast, and non-invasive test, with maximal inspiratory pressure (MIP) and maximal expiratory pressure (MEP) obtained to assist respiratory muscle assessment. Currently, there is a wide variety of models and brands of manovacuometers with different trachea diameters and lengths. However, the interference of these models in the measurements obtained by these equipments needs to be investigated. Thus, this study mainly aimed to verify the influence of tracheal length on maximal respiratory pressures (MRP), obtained by an analog manovacuometer, in healthy individuals. Our secondary objective was to verify the correlation between measurements. Fifty individuals, aged 18 to 30, of both sexes, were evaluated by spirometry and manovacuometry. MIP and MEP were performed using tracheas with same internal diameter (0.5 cm) and 30 cm, 60 cm, and 90 cm length. Significantly lower MIP values were observed when comparing a 90 cm trachea to 30 and 60 cm tracheas (Friedman’s ANOVA test and Wilcoxon test with Bonferroni adjustment). Tracheas with 30, 60, and 90 cm length and same diameter did not affect MIP and MEP values, except the 90 cm trachea for MIP values, which may interfere in the physical therapy clinical practice. Further studies are required to analyze the need for standardizing the trachea length used in manovacuometers.La manovacuometría es una prueba sencilla, rápida y no invasiva por la cual se obtienen la presión inspiratoria máxima (PImax) y la presión espiratoria máxima (PEmax), con el objetivo de ayudar en el examen muscular respiratorio. Hoy día se encuentran una gran variedad de modelos y marcas de manovacuometros, con diferentes diámetros y longitudes de las tráqueas, pero hacen falta estudios sobre la interferencia de estos modelos en las mediciones por este instrumento. En este texto se propone examinar en sujetos sanos, en primer lugar, la influencia en la longitud de las tráqueas en las presiones respiratorias máximas, obtenidas por manovacuometros analógicos, y en segundo lugar comprobar la existencia de correlación entre las mediciones. Se evaluaron a cincuenta sujetos entre 18 y 30 años de edad, tanto varones como mujeres, empleando la espirometría y la manovacuometría. Se midió la PImax y la PEmax empleando tráqueas de mismo diámetro interno (0,5 cm) y con longitudes de 30, 60 e 90 cm. Se observaron valores significativamente menores de PImax con la tráquea de longitud de 90 cm en comparación con las PImax con las tráqueas de 30 y 60 cm (prueba de Friedman’s ANOVA, la de Wilcoxon con ajustes de Bonferroni). Las tráqueas de 30, 60 y 90 cm de longitud y mismo diámetro no influyeron en los valores de la PEmax y de la PImax, con excepción de la tráquea de 90 cm en los valores de la PImax, lo que puede interferir la práctica clínica fisioterapéutica. Se necesitan más estudios para evaluar la necesidad de estándares de la longitud de tráqueas empleadas en manovacuometros.A manovacuometria é um teste simples, rápido e não invasivo por meio do qual a pressão inspiratória máxima (PImáx) e a pressão expiratória máxima (PEmáx) são obtidas, a fim de auxiliar na avaliação muscular respiratória. Atualmente, há grande variedade de modelos e marcas de manovacuômetros, com diferentes diâmetros e comprimentos de traqueias, no entanto, a interferência desses modelos nas medidas obtidas por esses equipamentos necessita de investigação. Desta forma, o objetivo primário deste estudo foi verificar a influência do comprimento de traqueias nas pressões respiratórias máximas, obtidas por meio de manovacuômetro analógico, em indivíduos saudáveis e, secundariamente, se há correlação entre as medidas. Foram avaliados 50 indivíduos, de 18 a 30 anos, de ambos os sexos, por meio da espirometria e manovacuometria. As PImáx e PEmáx foram realizadas com uso de traqueias de mesmo diâmetro interno (0,5 cm) e comprimentos de 30, 60 e 90 cm. Foram observados valores significativamente menores de PImáx obtidos com a traqueia de comprimento de 90 cm comparados às PImáx obtidas com as traqueias de 30 e 60 cm (teste de Friedman’s ANOVA com teste de Wilcoxon com ajuste de Bonferroni). As traqueias de 30, 60 e 90 cm de comprimento e mesmo diâmetro não influenciaram os valores de PEmáx e PImáx, exceto a traqueia de 90 cm para os valores de PImáx, o que pode interferir na prática clínica fisioterapêutica. Novos estudos são necessários para analisar a necessidade de padronização do comprimento da traqueia utilizada em manovacuômetros

Vip3A Resistance Alleles Exist at High Levels in Australian Targets before Release of Cotton Expressing This Toxin

Crops engineered to produce insecticidal crystal (Cry) proteins from the soil bacterium Bacillus thuringiensis (Bt) have revolutionised pest control in agriculture. However field-level resistance to Bt has developed in some targets. Utilising novel vegetative insecticidal proteins (Vips), also derived from Bt but genetically distinct from Cry toxins, is a possible solution that biotechnical companies intend to employ. Using data collected over two seasons we determined that, before deployment of Vip-expressing plants in Australia, resistance alleles exist in key targets as polymorphisms at frequencies of 0.027 (n = 273 lines, 95% CI = 0.019–0.038) in H. armigera and 0.008 (n = 248 lines, 0.004–0.015) in H. punctigera. These frequencies are above mutation rates normally encountered. Homozygous resistant neonates survived doses of Vip3A higher than those estimated in field-grown plants. Fortunately the resistance is largely, if not completely, recessive and does not confer resistance to the Bt toxins Cry1Ac or Cry2Ab already deployed in cotton crops. These later characteristics are favourable for resistance management; however the robustness of Vip3A inclusive varieties will depend on resistance frequencies to the Cry toxins when it is released (anticipated 2016) and the efficacy of Vip3A throughout the season. It is appropriate to pre-emptively screen key targets of Bt crops elsewhere, especially those such as H. zea in the USA, which is not only closely related to H. armigera but also will be exposed to Vip in several varieties of cotton and corn

A change in the optical polarization associated with a gamma-ray flare in the blazar 3C 279

It is widely accepted that strong and variable radiation detected over all accessible energy bands in a number of active galaxies arises from a relativistic, Doppler-boosted jet pointing close to our line of sight. The size of the emitting zone and the location of this region relative to the central supermassive black hole are, however, poorly known, with estimates ranging from light-hours to a light-year or more. Here we report the coincidence of a gamma-ray flare with a dramatic change of optical polarization angle. This provides evidence for co-spatiality of optical and gamma-ray emission regions and indicates a highly ordered jet magnetic field. The results also require a non-axisymmetric structure of the emission zone, implying a curved trajectory for the emitting material within the jet, with the dissipation region located at a considerable distance from the black hole, at about 10^5 gravitational radii.Comment: Published in Nature issued on 18 February 2010. Corresponding authors: Masaaki Hayashida and Greg Madejsk

Explaining Andean Potato Weevils in Relation to Local and Landscape Features: A Facilitated Ecoinformatics Approach

BACKGROUND: Pest impact on an agricultural field is jointly influenced by local and landscape features. Rarely, however, are these features studied together. The present study applies a "facilitated ecoinformatics" approach to jointly screen many local and landscape features of suspected importance to Andean potato weevils (Premnotrypes spp.), the most serious pests of potatoes in the high Andes. METHODOLOGY/PRINCIPAL FINDINGS: We generated a comprehensive list of predictors of weevil damage, including both local and landscape features deemed important by farmers and researchers. To test their importance, we assembled an observational dataset measuring these features across 138 randomly-selected potato fields in Huancavelica, Peru. Data for local features were generated primarily by participating farmers who were trained to maintain records of their management operations. An information theoretic approach to modeling the data resulted in 131,071 models, the best of which explained 40.2-46.4% of the observed variance in infestations. The best model considering both local and landscape features strongly outperformed the best models considering them in isolation. Multi-model inferences confirmed many, but not all of the expected patterns, and suggested gaps in local knowledge for Andean potato weevils. The most important predictors were the field's perimeter-to-area ratio, the number of nearby potato storage units, the amount of potatoes planted in close proximity to the field, and the number of insecticide treatments made early in the season. CONCLUSIONS/SIGNIFICANCE: Results underscored the need to refine the timing of insecticide applications and to explore adjustments in potato hilling as potential control tactics for Andean weevils. We believe our study illustrates the potential of ecoinformatics research to help streamline IPM learning in agricultural learning collaboratives