644 research outputs found

    Silicon Based Light Emission by Avalanche Breakdown of Shallow p+/n+ Junctions

    Get PDF
    The objective of this study was to develop and demonstrate a technology for producing optical signals on a VLSI chip using only standard silicon processing techniques. The design of the process requires shallow p+/n+ junctions to minimize the high absorption inherent in silicon for λ\u3c 8SOnm and to obtain low reversed biased voltages for avalanche break down of the p+/n+junction due to impact-ionization. The effects of doping and device geometry on the visible luminescence of reverse biased Si p+In+ junction diodes has been investigated. Each diode designed has a unique design incorporating sharp edges that promote high fields that aid the onset of break down. The p+ doping was varied while other processing parameters were held constant. All vertical junction diodes had excellent diode characteristics but no light emission was observed. Lateral junction diodes had typical reverse breakdown voltages of between 6 and 7 volts while certain devices of set geometry broke down rather sharply at 4 volts with light emission. Intensity and breakdown characteristics seemed to correlate with magnitude of p+ dose and device geometry

    Genetic diversity of the dengue vector Aedes aegypti in Australia and implications for future surveillance and mainland incursion monitoring

    Get PDF
    In February 2004, the discovery of an incursion of the dengue vector Aedes aegypti into the town of Tennant Creek in the Northern Territory caused concern for the Northern Territory health authorities who proceeded to implement a Commonwealth-funded eradication program. To determine the origin of the incursion, we performed a genetic analysis on Ae. aegypti from several Queensland and overseas localities. A comparison of DNA sequences from the mitochondrial cytochrome oxidase 1 gene indicated that the incursion was probably from Cairns or Camooweal. This genetic marker was also useful in identifying a separate Townsville haplotype population and another population on Thursday Island in the Torres Strait that is genetically distant to the mainland populations. The possible use of this marker as a surveillance tool for identifying the origins of local and overseas incursions is discussed

    Dengue and climate change in Australia: predictions for the future should incorporate knowledge from the past

    Get PDF
    •Dengue transmission in Australia is currently restricted to Queensland, where the vector mosquito Aedes aegypti is established. Locally acquired infections have been reported only from urban areas in the north-east of the state, where the vector is most abundant. •Considerable attention has been drawn to the potential impact of climate change on dengue distribution within Australia, with projections for substantial rises in incidence and distribution associated with increasing temperatures. •However, historical data show that much of Australia has previously sustained both the vector mosquito and dengue viruses. Although current vector distribution is restricted to Queensland, the area inhabited by A. aegypti is larger than the disease-transmission areas, and is not restricted by temperature (or vector-control programs); thus, it is unlikely that rising temperatures alone will bring increased vector or virus distribution. •Factors likely to be important to dengue and vector distribution in the future include increased dengue activity in Asian and Pacific nations that would raise rates of virus importation by travellers, importation of vectors via international ports to regions without A. aegypti, higher rates of domestic collection and storage of water that would provide habitat in urban areas, and growing human populations in northern Australia. •Past and recent successful control initiatives in Australia lend support to the idea that well resourced and functioning surveillance programs, and effective public health intervention capabilities, are essential to counter threats from dengue and other mosquito-borne diseases. •Models projecting future activity of dengue (or other vector-borne disease) with climate change should carefully consider the local historical and contemporary data on the ecology and distribution of the vector and local virus transmission

    Design and feasibility testing of a novel group intervention for young women who binge drink in groups

    Get PDF
    BackgroundYoung women frequently drink alcohol in groups and binge drinking within these natural drinking groups is common. This study describes the design of a theoretically and empirically based group intervention to reduce binge drinking among young women. It also evaluates their engagement with the intervention and the acceptability of the study methods.MethodsFriendship groups of women aged 18–35 years, who had two or more episodes of binge drinking (>6 UK units on one occasion; 48g of alcohol) in the previous 30 days, were recruited from the community. A face-to-face group intervention, based on the Health Action Process Approach, was delivered over three sessions. Components of the intervention were woven around fun activities, such as making alcohol free cocktails. Women were followed up four months after the intervention was delivered. Results The target of 24 groups (comprising 97 women) was recruited. The common pattern of drinking was infrequent, heavy drinking (mean consumption on the heaviest drinking day was UK 18.1 units). Process evaluation revealed that the intervention was delivered with high fidelity and acceptability of the study methods was high. The women engaged positively with intervention components and made group decisions about cutting down. Twenty two groups set goals to reduce their drinking, and these were translated into action plans. Retention of individuals at follow up was 87%.ConclusionsThis study successfully recruited groups of young women whose patterns of drinking place them at high risk of acute harm. This novel approach to delivering an alcohol intervention has potential to reduce binge drinking among young women. The high levels of engagement with key steps in the behavior change process suggests that the group intervention should be tested in a full randomised controlled trial

    Murray Valley encephalitis virus surveillance and control initiatives in Australia.

    Get PDF
    Mechanisms for monitoring Murray Valley encephalitis (MVE) virus activity include surveillance of human cases, surveillance for activity in sentinel animals, monitoring of mosquito vectors and monitoring of weather conditions. The monitoring of human cases is only one possible trigger for public health action and the additional surveillance systems are used in concert to signal the risk of human disease, often before the appearance of human cases. Mosquito vector surveillance includes mosquito trapping for speciation and enumeration of mosquitoes to monitor population sizes and relative composition. Virus isolation from mosquitoes can also be undertaken. Monitoring of weather conditions and vector surveillance determines whether there is a potential for MVE activity to occur. Virus isolation from trapped mosquitoes is necessary to define whether MVE is actually present, but is difficult to deliver in a timely fashion in some jurisdictions. Monitoring of sentinel animals indicates whether MVE transmission to vertebrates is actually occurring. Meteorological surveillance can assist in the prediction of potential MVE virus activity by signalling conditions that have been associated with outbreaks of Murray Valley encephalitis in humans in the past. Predictive models of MVE virus activity for south-eastern Australia have been developed, but due to the infrequency of outbreaks, are yet to be demonstrated as useful for the forecasting of major outbreaks. Surveillance mechanisms vary across the jurisdictions. Surveillance of human disease occurs in all States and Territories by reporting of cases to health authorities. Sentinel flocks of chickens are maintained in 4 jurisdictions (Western Australia, the Northern Territory, Victoria and New South Wales) with collaborations between Western Australia and the Northern Territory. Mosquito monitoring complements the surveillance of sentinel animals in these jurisdictions. In addition, other mosquito monitoring programs exist in other States (including South Australia and Queensland). Public health control measures may include advice to the general public and mosquito management programs to reduce the numbers of both mosquito larvae and adult vectors. Strategic plans for public health action in the event of MVE virus activity are currently developed or being developed in New South Wales, the Northern Territory, South Australia, Western Australia and Victoria. A southern tri-State agreement exists between health departments of New South Wales, Victoria and South Australia and the Commonwealth Department of Health and Aged Care. All partners have agreed to co-operate and provide assistance in predicting and combatting outbreaks of mosquito-borne disease in south-eastern Australia. The newly formed National Arbovirus Advisory Committee is a working party providing advice to the Communicable Diseases Network Australia on arbovirus surveillance and control. Recommendations for further enhancement of national surveillance for Murray Valley encephalitis are described

    "Do I really want to do this?" Longitudinal cohort study participants' perspectives on postal survey design: a qualitative study

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Randomised controlled trials have investigated aspects of postal survey design yet cannot elaborate on reasons behind participants' decision making and survey behaviour. This paper reports participants' perspectives of the design of, and participation in, a longitudinal postal cohort survey. It describes strengths and weaknesses in study design from the perspectives of study participants and aims to contribute to the: 1) design of future cohort surveys and questionnaires generally and, 2) design of cohort surveys for people with musculoskeletal disorders (MSDs) specifically.</p> <p>Methods</p> <p>In-depth interviews explored the design of postal surveys previously completed by participants. Interviews used open ended questioning with a topic guide for prompts if areas of interest were not covered spontaneously. Thematic data analysis was undertaken based on the framework method. A second researcher verified all coding.</p> <p>Results</p> <p>Data from fourteen interviews were analysed within three main themes; participation, survey design and survey content. One of the main findings was the importance of clear communication aimed at the correct audience both when inviting potential participants to take part and within the survey itself. Providing enough information about the study, having a topic of interest and an explanation of likely benefits of the study were important when inviting people to participate. The neutrality of the survey and origination from a reputable source were both important; as was an explanation about why information was being collected within the survey itself. Study findings included participants' impressions when invited to take part, why they participated, the acceptability of follow-up of non-responders and why participants completed the follow-up postal survey. Also discussed were participants' first impression of the survey, its length, presentation and participants' views about specific questions within the survey.</p> <p>Conclusions</p> <p>Ideas generated in this study provide an insight into participants' decision making and survey behaviour and may enhance the acceptability of future surveys to potential participants. As well as clear communication, participants valued incentives and survey questions that were relevant to them. However, opinions varied as to the preferred format for responses with some advising more opportunity for open-ended feedback. We also found that some standard format questions can raise quandaries for individual participants.</p

    Feasibility study of portable technology for weight loss and HbA1c control in type 2 diabetes

    Get PDF
    Background The study investigated the feasibility of conducting a future Randomised Controlled Trial (RCT) of a mobile health (mHealth) intervention for weight loss and HbA1c reduction in Type 2 Diabetes Mellitus (T2DM). Methods The intervention was a small wearable mHealth device used over 12 weeks by overweight people with T2DM with the intent to lose weight and reduce their HbA1c level. A 4 week maintenance period using the device followed. The device records physical activity level and information about food consumption, and provides motivational feedback based on energy balance. Twenty-seven participants were randomised to receive no intervention; intervention alone; or intervention plus weekly motivational support. All participants received advice on diet and exercise at the start of the study. Weight and HbA1c levels were recorded at baseline and weeks 6, 12, and 16. Qualitative interviews were conducted with participants who received the intervention to explore their experiences of using the device and involvement in the study including the training received. Results Overall the device was perceived to be well-liked, acceptable, motivational and easy to use by participants. Some logistical changes were required during the feasibility study, including shortening of the study duration and relaxation of participant inclusion criteria. Descriptive statistics of weight and HbA1c data showed promising trends of weight loss and HbA1c reduction in both intervention groups, although this should be interpreted with caution. Conclusions A number of methodological recommendations for a future RCT emerged from the current feasibility study. The mHealth device was acceptable and promising for helping individuals with T2DM to reduce their HbA1c and lose weight. Devices with similar features should be tested further in larger studies which follow these methodological recommendations

    Genetic association study of QT interval highlights role for calcium signaling pathways in myocardial repolarization.

    Get PDF
    The QT interval, an electrocardiographic measure reflecting myocardial repolarization, is a heritable trait. QT prolongation is a risk factor for ventricular arrhythmias and sudden cardiac death (SCD) and could indicate the presence of the potentially lethal mendelian long-QT syndrome (LQTS). Using a genome-wide association and replication study in up to 100,000 individuals, we identified 35 common variant loci associated with QT interval that collectively explain ∼8-10% of QT-interval variation and highlight the importance of calcium regulation in myocardial repolarization. Rare variant analysis of 6 new QT interval-associated loci in 298 unrelated probands with LQTS identified coding variants not found in controls but of uncertain causality and therefore requiring validation. Several newly identified loci encode proteins that physically interact with other recognized repolarization proteins. Our integration of common variant association, expression and orthogonal protein-protein interaction screens provides new insights into cardiac electrophysiology and identifies new candidate genes for ventricular arrhythmias, LQTS and SCD
    corecore