Synthesis and characterisation of Li11RE18M4O39−δ: RE = Nd or Sm; M = Al, Co or Fe

Four new phases of general formula, Li11RE18M4O39−δ: REM = NdAl, NdCo, SmCo, SmFe, have been synthesised and characterised. The NdAl phase, and probably the others, is isostructural with the NdFe analogue, but some cation disorder and partial site occupancies prevent full structural refinement of powder neutron diffraction data. The NdCo phase also forms a solid solution with variable Li content (and charge compensation by either oxygen vacancies or variable transition metal oxidation state). The NdAl phase is a modest conductor of Li+ ions whereas the other three phases are electronic conductors, attributed to mixed valence of the transition metal ions. Subsolidus phase diagrams for the systems Li2O–Nd2O3– Al2O3, ‘CoO’ have been determined and an additional new phase, LiCoNd4O8, which appears to have a K2NiF4-related superstructure, identified

Evaluating lithium diffusion mechanisms in the complex spinel Li2NiGe3O8

Lithium-ion diffusion mechanisms in the complex spinel Li2NiGe3O8 have been investigated using solid-state NMR, impedance, and muon spectroscopies. Partial occupancy of migratory interstitial 12d sites is shown to occur at lower temperatures than previously reported. Bulk activation energies for Li+ ion hopping range from 0.43 ± 0.03 eV for powdered samples to 0.53 ± 0.01 eV for samples sintered at 950 °C for 24 h, due to the loss of Li during sintering at elevated temperatures. A lithium diffusion coefficient of 3.89 × 10−12 cm2 s−1 was calculated from muon spectroscopy data for Li2NiGe3O8 at 300 K

Phase distribution, composition and disorder in Y2(Hf,Sn)2O7 ceramics : insights from solid-state NMR spectroscopy and first-principles calculations

The authors would like to thank the ERC (EU FP7 Consolidator Grant 614290 “‘EXONMR’”), and EPSRC for support for SS and ASG (EP/L005581/1). SEA would like to thank the Royal Society and Wolfson Foundation for a merit award. We acknowledge support from the Collaborative Computational Project on NMR Crystallography CCP-NC funded by EPSRC (EP/M022501/1).A NMR crystallographic approach, combining 89Y, 119Sn and 17O NMR spectroscopy with X-ray diffraction and first-principles calculations has been used investigate the number and type of phases present, and the local structure and disorder in Y2Hf2–xSnxO7 ceramics. Although a phase change is predicted with increasing Hf content, NMR spectra clearly show the presence of a significant two-phase region, with a Sn-rich pyrochlore and relatively Hf-rich defect fluorite phase co-existing for much of the compositional series. A single-phase pyrochlore is found only for the Sn end member, and a single defect fluorite phase only for x = 0 to 0.2. A solid-solution limit of ~10% is seen for the substitution of Hf into Y2Sn2O7, although no evidence is seen for any cation ordering or antisite disorder in this phase. In the defect fluorite phase there is preferential ordering of oxygen vacancies around Sn, which is only ever seen in a six-coordinate environment. The remaining vacancies are more likely to be associated with Hf than with Y, although this distinction is less apparent at higher Sn concentrations. To acquire 17O NMR spectra samples were post-synthetically exchanged with 17O2(g), although high temperatures (> 900 ºC) were required to ensure uniform enrichment of different chemical species. although these 17O NMR spectra confirm the formation of mixed-metal materials and the presence of two phases, more quantitative analysis is hindered by the overlap of signals from pyrochlore and defect fluorite phases. In all cases, DFT calculations play a vital role in the interpretation and assignment of the NMR spectra, and in understanding the local structure and disorder in these complex multi-phase materials.PostprintPostprintPeer reviewe

Co2TiO4/reduced graphene oxide nanohybrids for electrochemical sensing applications

For the first time, the synthesis, characterization, and analytical application for hydrogen peroxide quantification of the hybrid materials of Co2TiO4 (CTO) and reduced graphene oxide (RGO) is reported, using in situ (CTO/RGO) and ex situ (CTO+RGO) preparations. This synthesis for obtaining nanostructured CTO is based on a one-step hydrothermal synthesis, with new precursors and low temperatures. The morphology, structure, and composition of the synthesized materials were examined using scanning electron microscopy, X-ray diffraction (XRD), neutron powder diffraction (NPD), and X-ray photoelectron spectroscopy (XPS). Rietveld refinements using neutron diffraction data were conducted to determine the cation distributions in CTO. Hybrid materials were also characterized by Brunauer-Emmett-Teller adsorption isotherms, Scanning Electron microscopy, and scanning electrochemical microscopy. From an analytical point of view, we evaluated the electrochemical reduction of hydrogen peroxide on glassy carbon electrodes modified with hybrid materials. The analytical detection of hydrogen peroxide using CTO/RGO showed 11 and 5 times greater sensitivity in the detection of hydrogen peroxide compared with that of pristine CTO and RGO, respectively, and a two-fold increase compared with that of the RGO+CTO modified electrode. These results demonstrate that there is a synergistic effect between CTO and RGO that is more significant when the hybrid is synthetized through in situ methodology.Fil: Venegas, Constanza J.. Universidad de Chile; Chile. Universidad de Santiago de Chile; ChileFil: Gutierrez, Fabiana Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Eguílaz Rubio, Marcos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Marco, José F.. Consejo Superior de Investigaciones Científicas; EspañaFil: Reeves-McLaren, Nik. University Of Sheffield; Reino UnidoFil: Rivas, Gustavo Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Ruiz-León, Domingo. Universidad de Santiago de Chile; ChileFil: Bollo, Soledad. Universidad de Chile; Chil

Mechanism of Hydrogen-Bonded Complex Formation between Ibuprofen and Nanocrystalline Hydroxyapatite.

Nanocrystalline hydroxyapatite (nanoHA) is the main hard component of bone and has the potential to be used to promote osseointegration of implants and to treat bone defects. Here, using active pharmaceutical ingredients (APIs) such as ibuprofen, we report on the prospects of combining nanoHA with biologically active compounds to improve the clinical performance of these treatments. In this study, we designed and investigated the possibility of API attachment to the surface of nanoHA crystals via the formation of a hydrogen-bonded complex. The mechanistic studies of an ibuprofen/nanoHA complex formation have been performed using a holistic approach encompassing spectroscopic (Fourier transform infrared (FTIR) and Raman) and X-ray diffraction techniques, as well as quantum chemistry calculations, while comparing the behavior of the ibuprofen/nanoHA complex with that of a physical mixture of the two components. Whereas ibuprofen exists in dimeric form both in solid and liquid state, our study showed that the formation of the ibuprofen/nanoHA complex most likely occurs via the dissociation of the ibuprofen dimer into monomeric species promoted by ethanol, with subsequent attachment of a monomer to the HA surface. An adsorption mode for this process is proposed; this includes hydrogen bonding of the hydroxyl group of ibuprofen to the hydroxyl group of the apatite, together with the interaction of the ibuprofen carbonyl group to an HA Ca center. Overall, this mechanistic study provides new insights into the molecular interactions between APIs and the surfaces of bioactive inorganic solids and sheds light on the relationship between the noncovalent bonding and drug release properties

Insights into the influence of solvent polarity on the crystallization of poly(ethylene oxide) spin-coated thin films via in situ grazing incidence wide-angle X-ray scattering

Controlling polymer thin-film morphology and crystallinity is crucial for a wide range of applications, particularly in thin-film organic electronic devices. In this work, the crystallization behavior of a model polymer, poly(ethylene oxide) (PEO), during spin-coating is studied. PEO films were spun-cast from solvents possessing different polarities (chloroform, THF, and methanol) and probed via in situ grazing incidence wide-angle X-ray scattering. The crystallization behavior was found to follow the solvent polarity order (where chloroform chloroform > methanol). When spun-cast from nonpolar chloroform, crystallization largely followed Avrami kinetics, resulting in the formation of morphologies comprising large spherulites. PEO solutions cast from more polar solvents (THF and methanol) do not form well-defined highly crystalline morphologies and are largely amorphous with the presence of small crystalline regions. The difference in morphological development of PEO spun-cast from polar solvents is attributed to clustering phenomena that inhibit polymer crystallization. This work highlights the importance of considering individual components of polymer solubility, rather than simple total solubility, when designing processing routes for the generation of morphologies with optimum crystallinities or morphologies

A comparative study of the effect of synthesis method on the formation of P2- and P3-Na0.67Mn0.9Mg0.1O2 cathodes

Na-ion batteries offer a way to develop large-scale energy storage necessary for the increased adoption of renewable energy sources. Layered transition metal oxide materials for electrodes can be synthesised using abundant and non-toxic materials, decreasing costs and risks compared to lithium-ion batteries. Solid state processing is commonly used for synthesis, using long calcinations at high temperatures (>800 °C). Other synthetic routes, such as biotemplating, offer the opportunity to reduce reaction temperatures and times, and can enable access to different polymorphs. Here, we compare the properties of Na _0.67 Mn _0.9 Mg _0.1 O _2 synthesised by both solid state and biotemplating, producing both P2 and P3 polymorphs to understand the differences which arise as a result of synthesis and temperature choice. We show that biotemplated P3-Na _0.67 Mn _0.9 Mg _0.1 O _2 offers increased discharge capacity over the more commonly reported P2 phase for 50 cycles at C/5, 103 mAh g ^−1 for biotemplated P3-NMMO. Furthermore, the biotemplating samples demonstrate improved capacity after 50 cycles at C/5, and higher capacity delivered at 5C in both P2 and P3 phases over conventional solid state synthesis

Synthesis, structural characterization and Li+ ion conductivity of a new vanado-molybdate phase, LiMg3VMo2O12

A new vanado-molybdate LiMg3VMo2O12 has been synthesized, the crystal structure determined and ionic conductivity measured. The solid solution Li2-zMg2+zVzMo3-zO12 was investigated and the structures of the z=0.5 and 1.0 compositions were refined by Rietveld analysis of powder X-ray (XRD) and powder neutron diffraction (ND) data. The structures were refined in the orthorhombic space group Pnma with a~5.10, b~10.4 and c~17.6 Å, and are isostructural with the previously-reported double molybdates Li2M2(MoO4)3 (M=M2+, z=0). The structures comprise of two unique (Li/Mg)O6 octahedra, (Li/Mg)O6 trigonal prisms and two unique (Mo/V)O4 tetrahedra. A well-defined 1:3 ratio of Li+:Mg2+ is observed in octahedral chains for LiMg3VMo2O12. Li+ preferentially occupies trigonal prisms and Mg2+ favours octahedral sheets. Excess V5+ adjacent to the octahedral sheets may indicate short-range order. Ionic conductivity measured by impedance spectroscopy (IS) and differential scanning calorimetry (DSC) measurements show the presence of a phase transition, at 500-600 °C, depending on x. A decrease in activation energy for Li+ ion conductivity occurs at the phase transition and the high temperature structure is a good Li+ ion conductor with σ~1×10-3 to 4×10-2 Scm-1 and Ea~0.6 to 0.8 eV