332 research outputs found

    Plastisol Foaming Process. Decomposition of the Foaming Agent, Polymer Behavior in the Corresponding Temperature Range and Resulting Foam Properties

    Get PDF
    The decomposition of azodicarbonamide, used as foaming agent in PVC - plasticizer (1/1) plastisols was studied by DSC. Nineteen different plasticizers, all belonging to the ester family, two being polymeric (polyadipates), were compared. The temperature of maximum decomposition rate (in anisothermal regime at 5 K min-1 scanning rate), ranges between 434 and 452 K. The heat of decomposition ranges between 8.7 and 12.5 J g -1. Some trends of variation of these parameters appear significant and are discussed in terms of solvent (matrix) and viscosity effects on the decomposition reactions. The shear modulus at 1 Hz frequency was determined at the temperature of maximum rate of foaming agent decomposition, and differs significantly from a sample to another. The foam density was determined at ambient temperature and the volume fraction of bubbles was used as criterion to judge the efficiency of the foaming process. The results reveal the existence of an optimal shear modulus of the order of 2 kPa that corresponds roughly to plasticizer molar masses of the order of 450 ± 50 g mol-1. Heavier plasticizers, especially polymeric ones are too difficult to deform. Lighter plasticizers such as diethyl phthalate (DEP) deform too easily and presumably facilitate bubble collapse

    QCD and strongly coupled gauge theories : challenges and perspectives

    Get PDF
    We highlight the progress, current status, and open challenges of QCD-driven physics, in theory and in experiment. We discuss how the strong interaction is intimately connected to a broad sweep of physical problems, in settings ranging from astrophysics and cosmology to strongly coupled, complex systems in particle and condensed-matter physics, as well as to searches for physics beyond the Standard Model. We also discuss how success in describing the strong interaction impacts other fields, and, in turn, how such subjects can impact studies of the strong interaction. In the course of the work we offer a perspective on the many research streams which flow into and out of QCD, as well as a vision for future developments.Peer reviewe

    Seaweed polysaccharide-based hydrogels used for the regeneration of articular cartilage

    Get PDF
    This manuscript provides an overview of the in vitro and in vivo studies reported in the literature focusing on seaweed polysaccharides based hydrogels that have been proposed for applications in regenerative medicine, particularly, in the field of cartilage tissue engineering. For a better understanding of the main requisites for these specific applications, the main aspects of the native cartilage structure, as well as recognized diseases that affect this tissue are briefly described. Current available treatments are also presented to emphasize the need for alternative techniques. The following part of this review is centered on the description of the general characteristics of algae polysaccharides, as well as relevant properties required for designing hydrogels for cartilage tissue engineering purposes. An in-depth overview of the most well known seaweed polysaccharide, namely agarose, alginate, carrageenan and ulvan biopolymeric gels, that have been proposed for engineering cartilage is also provided. Finally, this review describes and summarizes the translational aspect for the clinical application of alternative systems emphasizing the importance of cryopreservation and the commercial products currently available for cartilage treatment.Authors report no declarations of interest. Authors thank the Portuguese Foundation for Science and Technology (FCT) for the PhD fellowship of Elena G. Popa (SFRH/BD/64070/2009) and research project (MIT/ECE/0047/2009). The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement no REGPOT-CT2012-316331-POLARIS

    Optimal error estimation for H(curl)-conforming p-interpolation in two dimensions

    Get PDF
    In this paper we prove an optimal error estimate for the H(curl)-conforming projection based p-interpolation operator introduced in [L. Demkowicz and I. Babuska, p interpolation error estimates for edge finite elements of variable order in two dimensions, SIAM J. Numer. Anal., 41 (2003), pp. 1195-1208]. This result is proved on the reference element (either triangle or square) K for regular vector fields in H^r(curl,K) with arbitrary r>0. The formulation of the result in the H(div)-conforming setting, which is relevant for the analysis of high-order boundary element approximations for Maxwell's equations, is provided as well

    Higher Doses of Subcutaneous IgG Reduce Resource Utilization in Patients with Primary Immunodeficiency

    Get PDF
    The recommended dose of IgG in primary immunodeficiency (PID) has been increasing since its first use. This study aimed to determine if higher subcutaneous IgG doses resulted in improved patient outcomes by comparing results from two parallel clinical studies with similar design. One patient cohort received subcutaneous IgG doses that were 1.5 times higher than their previous intravenous doses (mean 213 mg/kg/week), whereas the other cohort received doses identical to previous subcutaneous or intravenous doses (mean 120 mg/kg/week). While neither cohort had any serious infections, the cohort maintained on higher mean IgG dose had significantly lower rates of non-serious infections (2.76 vs. 5.18 episodes/year, P < 0.0001), hospitalization (0.20 vs. 3.48 days/year, P < 0.0001), antibiotic use (48.50 vs. 72.75 days/year, P < 0.001), and missed work/school activity (2.10 vs. 8.00 days/year, P < 0.001). The higher-dose cohort had lower health care utilization and improved indices of well being compared to the cohort treated with traditional IgG doses

    Association of the TLR4 Asp299Gly polymorphism with lung function in relation to body mass index

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Previous studies have shown conflicting results for the association between TLR4 polymorphism (Asp299Gly) and lung function. We investigated the influence of TLR4 Asp299Gly, a polymorphism, on lung function in a community population.</p> <p>Methods</p> <p>In 2003, a cross-sectional survey was conducted to assess the respiratory health of residents living in and around the town of Humboldt, Saskatchewan, Canada. There were 2090 adults age 18-79 years who completed a questionnaire that included a medical and smoking history, as well as socio-economic and lifestyle variables. Genetic information and lung function test measurements were available on 1725 subjects (754 males and 971 females) of the 2090 respondents. These subjects were selected for further analysis to investigate the association between TLR4 Asp299Gly genotype and forced expiratory volume in the first second in liters (FEV<sub>1</sub>), forced vital capacity in liters (FVC), FEV<sub>1</sub>/FVC ratio, and forced expiratory flow rate in liters/second (FEF<sub>25-75</sub>). Multivariable linear regression analysis was used to investigate associations.</p> <p>Results</p> <p><b>A</b>djusted mean values of FEV<sub>1 </sub>and FVC were significantly different between TLR4 wild type and TLR4 variant groups [Mean ± S.E.: (TLR4 wild type - FEV<sub>1</sub>: 3.18 ± 0.02, FVC: 3.95 ± 0.03; TLR4 variant - FEV<sub>1</sub>: 3.31 ± 0.06, FVC: 4.14 ± 0.07)]. Based on multivariable regression analysis, we observed that body mass index (BMI) was associated with decreased FEV<sub>1</sub>/FVC ratio and FEF<sub>25-75 </sub>in TLR4 variant group but not in wild type group.</p> <p>Conclusion</p> <p>BMI may modify the associations of TLR4 Asp299Gly polymorphism with FEV<sub>1</sub>/FVC ratio and FEF<sub>25-75</sub>.</p

    Maxillofacial injuries associated with intimate partner violence in women

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>The facial region has been the most common site of injury following violent episodes. The purpose of this study was to determine the prevalence and pattern of maxillofacial injuries associated with intimate partner violence (IPV) in women treated at a single facility in Malaysia.</p> <p>Methods</p> <p>A retrospective review of 242 hospital records of female IPV victims who were seen at the One-Stop Crisis Centre (OSCC) in Hospital Raja Perempuan Zainab II, Kelantan over a two-year period (January 1, 2005 to December 31, 2006) was performed. A structured form was used for data collection. Information regarding the anatomical sites of injuries, types of injuries, and mechanisms of assault were obtained.</p> <p>Results</p> <p>Most victims were married (85.1%), were injured by the husband (83.5%), and had at least one previous IPV episode (85.5%). Injury to the maxillofacial region was the most common (50.4%), followed by injury to the limbs (47.9%). In 122 cases of maxillofacial injuries, the middle of the face was most frequently affected (60.6%), either alone or in combination with the upper or lower third of the face. Injury to soft tissues (contusions, abrasions and lacerations) was the most common (87.7%).</p> <p>Conclusions</p> <p>This study indicates there is a high prevalence of maxillofacial injuries associated with IPV among women treated at the OSCC in Kelantan, Malaysia.</p
    corecore