323 research outputs found
Des appareillages en évolution : détection haute résolution en position et en temps
Ăcole thĂ©matiqu
MPGD's spatial and energy resolution studies with an adjustable point-like electron source
11th Vienna Conference on Instrumentation (February 2007) , to appear in the Proceedings (NIM A)International audienceMicropattern Gaseous Detectors (MPGD), like Micromegas or GEM, are used or foreseen in particle physics experiments for which a very good spatial resolution is required. We have developed an experimental method to separate the contribution of the transverse diffusion and the multiplication process by varying the number of primary electrons generated by a point-like source. A pulsed nitrogen laser is focused by an optical set-up on the drift electrode which is made of a thin metal layer deposited on a quartz lamina. The number of primary electrons can be adjusted from a few to several thousands on a spot which transverse size is less than RMS. The detector can be positioned with an accuracy of by a motorized three dimensional system. This method was applied to a small Micromegas detector with a gain set between and and an injection of 60 to 2000 photoelectrons. Spatial resolutions as small as were measured with 2000 primary electrons. An estimation of the upper limit of the relative gain variance can be obtained from the measurements
A large dynamic range integrated front-end for photomultiplier tubes
A full custom analog CMOS circuit for obtaining a photomultiplier readout with a 16 bit resolution over 7 V has been developed. It is part of the R&D program for the photomultiplier tube front-end readout of the Pierre Auger Observatory northern site. It performs signal duplication and amplification with three gains: 0.15, 1 and 6. Each amplifier has a resolution of 10 bit and can measure signals with durations of several microseconds with a good baseline stability, for an input charge of up to tens of nano-Coulombs. The amplification is performed by current feedback amplifiers with a bandwidth of 60 MHz.The input impedance, adapted to the coaxial cables, is stable over the whole working range. A prototype was submitted in April 2004 and successfully tested. The linearity over the working range is less than 1%. It was also successfully tested on the Auger surface detector element installed at Orsay (comprised of a Cherenkov water tank equipped with Photonis XP1805 9â diameter photomultiplier tubes). The resolution over 7 V is 16.6 bit.This circuit is the first step towards a âsystem-on-a-chipâ (SoC) solution for a photomultplier tube readout equipped with a fast ADC for signal digitization. A setup using a single cable for both the signal and the photomultiplier high voltage power supply was shown to be successful
SD electronics: simulations on the dynamic range
The surface detector electronics of the Pierre Auger Observatory is characterized by a large dynamic range due to the variation of the signal intensity of the Cherenkov tanks as a function of the distance from the core. In this paper, we present results of simulations and discuss the impact of the dynamic range on the shower reconstruction
Design of the photomultiplier bases for the surface detectors of the Pierre Auger Observatory
The design of the photomultiplier bases for the surface detectors of the Pierre Auger Observatory is presented. The bleeder is purely resistive. The base comprises two outputs: one from the anode and another one from the last dynode followed by an amplifier. The charge ratio between the anode and the amplified dynode is around 30. The design ensures a low consumption (less than 100 mu A at 2 kV), a stability of the gain and of the base line during the whole period of measurement (20 mu s per event) and for the whole dynamic range (max. 1 to 3x10^4 in amplitude). First measurement with a prototype base on the Hamamatsu R5912 photomultiplier tube are presented
Liquid-gas phase transition in hot nuclei studied with INDRA
Thanks to the high detection quality of the INDRA array, signatures related
to the dynamics (spinodal decomposition) and thermodynamics (negative
microcanonical heat capacity) of a liquid-gas phase transition have been
simultaneously studied in multifragmentation events in the Fermi energy domain.
The correlation between both types of signals strongly supports the existence
of a first order phase transition for hot nuclei.Comment: 9 pages, 2 figures, Invited talk to Nucleus-nucleus 2003 Moscow June
200
Freeze-out volume in multifragmentation - dynamical simulations
Stochastic mean-field simulations for multifragmenting sources at the same
excitation energy per nucleon have been performed. The freeze-out volume, a
concept which needs to be precisely defined in this dynamical approach, was
shown to increase as a function of three parameters: freeze-out instant,
fragment multiplicity and system size.Comment: Submitted to Eur. Phys. J. A - march 200
Fragment properties of fragmenting heavy nuclei produced in central and semi-peripheral collisions
Fragment properties of hot fragmenting sources of similar sizes produced in
central and semi-peripheral collisions are compared in the excitation energy
range 5-10 AMeV. For semi-peripheral collisions a method for selecting compact
quasi-projectiles sources in velocity space similar to those of fused systems
(central collisions) is proposed. The two major results are related to
collective energy. The weak radial collective energy observed for
quasi-projectile sources is shown to originate from thermal pressure only. The
larger fragment multiplicity observed for fused systems and their more
symmetric fragmentation are related to the extra radial collective energy due
to expansion following a compression phase during central collisions. A first
attempt to locate where the different sources break in the phase diagram is
proposed.Comment: 23 pages submitted to NP
The HADES Tracking System
The tracking system of the dielectron spectrometer HADES at GSI Darmstadt is
formed out of 24 low-mass, trapezoidal multi-layer drift chambers providing in
total about 30 square meter of active area. Low multiple scattering in the in
total four planes of drift chambers before and after the magnetic field is
ensured by using helium-based gas mixtures and aluminum cathode and field
wires. First in-beam performance results are contrasted with expectations from
simulations. Emphasis is placed on the energy loss information, exploring its
relevance regarding track recognition.Comment: 6 pages, 4 figures, presented at the 10th Vienna Conference on
Instrumentation, Vienna, February 2004, to be published in NIM A (special
issue
Measurements of sideward flow around the balance energy
Sideward flow values have been determined with the INDRA multidetector for
Ar+Ni, Ni+Ni and Xe+Sn systems studied at GANIL in the 30 to 100 A.MeV incident
energy range. The balance energies found for Ar+Ni and Ni+Ni systems are in
agreement with previous experimental results and theoretical calculations.
Negative sideward flow values have been measured. The possible origins of such
negative values are discussed. They could result from a more important
contribution of evaporated particles with respect to the contribution of
promptly emitted particles at mid-rapidity. But effects induced by the methods
used to reconstruct the reaction plane cannot be totally excluded. Complete
tests of these methods are presented and the origins of the
``auto-correlation'' effect have been traced back. For heavy fragments, the
observed negative flow values seem to be mainly due to the reaction plane
reconstruction methods. For light charged particles, these negative values
could result from the dynamics of the collisions and from the reaction plane
reconstruction methods as well. These effects have to be taken into account
when comparisons with theoretical calculations are done.Comment: 27 pages, 15 figure
- âŠ