Positron annihilation lifetime spectroscopy insight on free volume conversion of nanostructured MgAl2 O4 ceramics

H.K. and A.I.P. are grateful for the support from the COST Action CA17126. H.K. was also supported by the Ministry of Education and Science of Ukraine (project for young researchers No. 0119U100435). In addition, I.K. and H.K. were also supported by the National Research Foundation of Ukraine via project 2020.02/0217, while the research of A.I.P. was funded by the Latvian research council via the Latvian National Research Program under the topic ?High-Energy Physics and Accelerator Technologies?, Agreement No: VPP-IZM-CERN-2020/1-0002. In addition, the research of A.I.P. has been supported by the Latvian-Ukrainian Grant LV-UA/2021/5. The Institute of Solid State Physics, University of Latvia (Latvia) as the Centre of Excellence has received funding from the European Union?s Horizon 2020 Framework Programme H2020-WIDESPREAD01-2016-2017- Teaming Phase2 under grant agreement No. 739508, project CAMART2.Herein we demonstrate the specifics of using the positron annihilation lifetime spectroscopy (PALS) method for the study of free volume changes in functional ceramic materials. Choosing technological modification of nanostructured MgAl2 O4 spinel as an example, we show that for ceramics with well-developed porosity positron annihilation is revealed through two channels: positron trapping channel and ortho-positronium decay. Positron trapping in free-volume defects is described by the second component of spectra and ortho-positronium decay process by single or multiple components, depending on how well porosity is developed and on the experimental configuration. When using proposed positron annihilation lifetime spectroscopy approaches, three components are the most suitable fit in the case of MgAl2 O4 ceramics. In the analysis of the second component, it is shown that technological modification (increasing sintering temperature) leads to volume shrinking and decreases the number of defect-related voids. This process is also accompanied by the decrease of the size of nanopores (described by the third component), while the overall number of nanopores is not affected. The approach to the analysis of positron annihilation lifetime spectra presented here can be applied to a wide range of functional nanomaterials with pronounced porosity. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. Published under the CC BY 4.0 license.European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD01-2016-2017-Teaming Phase2 739508; Latvian National Research Program VPP-IZM-CERN-2020/1-0002; Latvian Science Council; National Research Foundation of Ukraine 2020.02/0217; European Cooperation in Science and Technology CA17126; National Research Foundation of Korea; Latvijas Universitate; Institute of Solid State Physics, Chinese Academy of Sciences; Ministry of Education and Science of Ukraine 0119U100435; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2

Evolution of free volumes in polycrystalline baga2o4 ceramics doped with eu3+ ions

H.K. and Y.K. would like to thank A. Ingram for assistance in PAL experiments. The authors thank E.A. Kotomin and M. Brik for the many useful discussions. The research was (partly) performed in the Institute of Solid State Physics, University of Latvia ISSP UL. ISSP UL as the Center of Excellence is supported through the Framework Program for European universities Union Horizon 2020, H2020-WIDESPREAD-01–2016–2017-TeamingPhase2 under Grant Agreement No. 739508, CAMART2 project.BaGa2O4 ceramics doped with Eu3+ ions (1, 3 and 4 mol.%) were obtained by solid-phase sintering. The phase composition and microstructural features of ceramics were investigated using X-ray diffraction and scanning electron microscopy in comparison with energy-dispersive methods. Here, it is shown that undoped and Eu3+-doped BaGa2O4 ceramics are characterized by a developed structure of grains, grain boundaries and pores. Additional phases are mainly localized near grain boundaries creating additional defects. The evolution of defect-related extended free volumes in BaGa2O4 ceramics due to the increase in the content of Eu3+ ions was studied using the positron annihilation lifetime spectroscopy technique. It is established that the increase in the number of Eu3+ ions in the basic BaGa2O4 matrix leads to the agglomeration of free-volume defects with their subsequent fragmentation. The presence of Eu3+ ions results in the expansion of nanosized pores and an increase in their number with their future fragmentation. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. Published under the CC BY 4.0 license.This work was supported by the Ministry of Education and Science of Ukraine (project for young researchers No. 0119U100435) for H.K and Y.K.; the National Research Foundation of Ukraine (project 2020.02/0217) for I.K. and H.K. as well as by the Latvian research council via the Latvian National Research Program under the topic “High-Energy Physics and Accelerator Technologies”, Agreement No: VPP-IZM-CERN-2020/1-0002, for V.P. and A.I.P; ISSP UL as the Center of Excellence is supported through the Framework Program for European universities Union Horizon 2020, H2020-WIDESPREAD-01–2016–2017-TeamingPhase2 under Grant Agreement No. 739508, CAMART2 project

Microstructure of Ag2BI4 (B = Ag, Cd) superionics studied by SEM, impedance spectroscopy and fractal dimension analysis

Two silver ion conducting solid electrolytes, Ag2HgI4 and Ag2CdI4, representing a wide class of AgI-based halogenide superionics have been the subjects of study by means of electrical impedance spectroscopy, SEM, porosity measurements and fractal dimension analysis. Even though both materials have been obtained by the same method under strictly identical conditions they were found to exhibit certain differences at the microstructural level. Thus, by the direct measurements of porosity and density it was found that the grain boundaries are better developed in silver mercuric iodide. On the assumption that pore geometry in the materials under study displays fractal character it was shown that the fractal dimension of the pore contours is larger in the case of Ag2HgI4. These results are in agreement with electrical studies which indicated that the grain boundary capacitance in Ag2CdI4 is two orders of magnitude smaller than that of the silver mercuric iodide

Boron-Made N2: Realization of a B≡B Triple Bond in the B2Al3− Cluster

Until now, all B≡B triple bonds have been achieved by adopting two ligands in the L→B≡B←L manner. Herein, we report an alternative route of designing the B≡B bonds based on the assumption that by acquiring two extra electrons, an element with the atomic number Z can have properties similar to those of the element with the atomic number Z+2. Specifically, we show that due to the electron donation from Al to B, the negatively charged B≡B kernel in the B2Al3− cluster mimics a triple N≡N bond. Comprehensive computational searches reveal that the global minimum structure of B2Al3− exhibits a direct B–B distance of 1.553 Å, and its calculated electron vertical detachment energies are in excellent agreement with the corresponding values of the experimental photoelectron spectrum. Chemical bonding analysis revealed one σ and two π bonds between the two B atoms, thus confirming a classical textbook B≡B triple bond, similar to that of N2

Effects of a recombinant gene expression on ColE1-like plasmid segregation in Escherichia coli

<p>Abstract</p> <p>Background</p> <p>Segregation of expression plasmids leads to loss of recombinant DNA from transformed bacterial cells due to the irregular distribution of plasmids between the daughter cells during cell division. Under non-selective conditions this segregational instability results in a heterogeneous population of cells, where the non-productive plasmid-free cells overgrow the plasmid-bearing cells thus decreasing the yield of recombinant protein. Amongst the factors affecting segregational plasmid instability are: the plasmid design, plasmid copy-number, host cell genotype, fermentation conditions etc. This study aims to investigate the influence of transcription and translation on the segregation of recombinant plasmids designed for constitutive gene expression in <it>Escherichia coli </it>LE392 at glucose-limited continuous cultivation. To this end a series of pBR322-based plasmids carrying a synthetic human interferon-gamma (hIFNγ) gene placed under the control of different regulatory elements (promoter and ribosome-binding sites) were used as a model.</p> <p>Results</p> <p>Bacterial growth and product formation kinetics of transformed <it>E. coli </it>LE392 cells cultivated continuously were described by a structured kinetic model proposed by Lee et al. (1985). The obtained results demonstrated that both transcription and translation efficiency strongly affected plasmid segregation. The segregation of plasmid having a deleted promoter did not exceed 5% after 190 h of cultivation. The observed high plasmid stability was not related with an increase in the plasmid copy-number. A reverse correlation between the yield of recombinant protein (as modulated by using different ribosome binding sites) and segregational plasmid stability (determined by the above model) was also observed.</p> <p>Conclusions</p> <p>Switching-off transcription of the hIFNγ gene has a stabilising effect on ColE1-like plasmids against segregation, which is not associated with an increase in the plasmid copy-number. The increased constitutive gene expression has a negative effect on segregational plasmid stability. A kinetic model proposed by Lee et al. (1985) was appropriate for description of <it>E. coli </it>cell growth and recombinant product formation in chemostat cultivations.</p

Recommended reading list of early publications on atomic layer deposition-Outcome of the "Virtual Project on the History of ALD"

Atomic layer deposition (ALD), a gas-phase thin film deposition technique based on repeated, self-terminating gas-solid reactions, has become the method of choice in semiconductor manufacturing and many other technological areas for depositing thin conformal inorganic material layers for various applications. ALD has been discovered and developed independently, at least twice, under different names: atomic layer epitaxy (ALE) and molecular layering. ALE, dating back to 1974 in Finland, has been commonly known as the origin of ALD, while work done since the 1960s in the Soviet Union under the name "molecular layering" (and sometimes other names) has remained much less known. The virtual project on the history of ALD (VPHA) is a volunteer-based effort with open participation, set up to make the early days of ALD more transparent. In VPHA, started in July 2013, the target is to list, read and comment on all early ALD academic and patent literature up to 1986. VPHA has resulted in two essays and several presentations at international conferences. This paper, based on a poster presentation at the 16th International Conference on Atomic Layer Deposition in Dublin, Ireland, 2016, presents a recommended reading list of early ALD publications, created collectively by the VPHA participants through voting. The list contains 22 publications from Finland, Japan, Soviet Union, United Kingdom, and United States. Up to now, a balanced overview regarding the early history of ALD has been missing; the current list is an attempt to remedy this deficiency. (C) 2016 Author(s).Peer reviewe