Distributed allocation of a shared energy storage system in a microgrid

The economic management of a microgrid can greatly benefit from energy storage systems (ESSs), which may act as virtual load deferral systems to take advantage of the fluctuations of energy prices and accommodate for demand-production mismatches caused by the scarce predictability of renewable sources. In a distributed energy management scenario, an ESS may serve multiple users, a setting which calls for the development of suitable resource allocation policies for the storage capacity. In particular, distributed control policies are of interest, where each user operates independently with the least exchange of information with the other users. A methodology is developed in the paper for such purpose, based on an iterative resource allocation mechanism, realized by means of a negotiation process among users, resembling stock exchange dynamics. The resulting distributed strategy for the management of the shared resource comes close to optimality at a low computational cost, which is affordable in large scale practical applications. It is also robust to communication failures between users

Design of beams and slabs of self-compacting concrete fittings working to flexion

Numerous experimental studies indicate that addition of fibers substantially increases the shear strength of concrete and mortar beams, and that stirrups and reinforcing fibers combination can be really effective. When steel fibers are used as a supplement or substitute for vertical stirrups or folded bars, we obtain the following characteristics: The fibers are distributed randomly by the volume of the concrete with a closer separation than can be achieved with the Armor; The tensile strength at first crack, the ultimate tensile strength and the shear friction resistance are increased

Strong fisheries management and governance positively impact ecosystem status

Fisheries have had major negative impacts on marine ecosystems, and effective fisheries management and governance are needed to achieve sustainable fisheries, biodiversity conservation goals and thus good ecosystem status. To date, the IndiSeas programme (Indicators for the Seas) has focussed on assessing the ecological impacts of fishing at the ecosystem scale using ecological indicators. Here, we explore fisheries Management Effectiveness' and Governance Quality' and relate this to ecosystem health and status. We developed a dedicated expert survey, focused at the ecosystem level, with a series of questions addressing aspects of management and governance, from an ecosystem-based perspective, using objective and evidence-based criteria. The survey was completed by ecosystem experts (managers and scientists) and results analysed using ranking and multivariate methods. Results were further examined for selected ecosystems, using expert knowledge, to explore the overall findings in greater depth. Higher scores for Management Effectiveness' and Governance Quality' were significantly and positively related to ecosystems with better ecological status. Key factors that point to success in delivering fisheries and conservation objectives were as follows: the use of reference points for management, frequent review of stock assessments, whether Illegal, Unreported and Unregulated (IUU) catches were being accounted for and addressed, and the inclusion of stakeholders. Additionally, we found that the implementation of a long-term management plan, including economic and social dimensions of fisheries in exploited ecosystems, was a key factor in successful, sustainable fisheries management. Our results support the thesis that good ecosystem-based management and governance, sustainable fisheries and healthy ecosystems go together.IOC-UNESCO; EuroMarine; European FP7 MEECE research project; European Network of Excellence Eur-Oceans; FRB EMIBIOS project [212085]info:eu-repo/semantics/publishedVersio

Uses of innovative modeling tools within the implementation of the marine strategy framework directive

© 2016 Lynam, Uusitalo, Patrício, Piroddi, Queirós, Teixeira, Rossberg, Sagarminaga, Hyder, Niquil, Möllmann, Wilson, Chust, Galparsoro, Forster, Veríssimo, Tedesco, Revilla and Neville. In Europe and around the world, the approach to management of the marine environment has developed from the management of single issues (e.g., species and/or pressures) toward holistic Ecosystem Based Management (EBM) that includes aims to maintain biological diversity and protect ecosystem functioning. Within the European Union, this approach is implemented through the Marine Strategy Framework Directive (MSFD, 2008/56/EC). Integrated Ecosystem Assessment is required by the Directive in order to assess Good Environmental Status (GES). Ecological modeling has a key role to play within the implementation of the MSFD, as demonstrated here by case studies covering a range of spatial scales and a selection of anthropogenic threats. Modeling studies have a strong role to play in embedding data collected at limited points within a larger spatial and temporal scale, thus enabling assessments of pelagic and seabed habitat. Furthermore, integrative studies using food web and ecosystem models are able to investigate changes in food web functioning and biological diversity in response to changes in the environment and human pressures. Modeling should be used to: support the development and selection of specific indicators; set reference points to assess state and the achievement of GES; inform adaptive monitoring programs and trial management scenarios. The modus operandi proposed shows how ecological modeling could support the decision making process leading to appropriate management measures and inform new policy

Mesoscale productivity fronts and local fishing opportunities in the European Seas

This study evaluates the relationship between both commercial and scientific spatial fisheries data and a new satellite-based estimate of potential fish production (Ocean Productivity available to Fish, OPFish) in the European Seas. To construct OPFish, we used productivity frontal features derived from chlorophyll-a horizontal gradients, which characterize 10%–20% of the global phytoplankton production that effectively fuels higher trophic levels. OPFish is relatively consistent with the spatial distribution of both pelagic and demersal fish landings and catches per unit of effort (LPUEs and CPUEs, respectively). An index of harvest relative to ocean productivity (HP index) is calculated by dividing these LPUEs or CPUEs with OPFish. The HP index reflects the intensity of fishing by gear type with regard to local fish production. Low HP levels indicate lower LPUEs or CPUEs than expected from oceanic production, suggesting over-exploitation, while high HP levels imply more sustainable fishing. HP allows comparing the production-dependent suitability of local fishing intensities. Our results from bottom trawl data highlight that over-exploitation of demersal species from the shelves is twice as high in the Mediterranean Sea than in the North-East Atlantic. The estimate of HP index by dominant pelagic and demersal gears suggests that midwater and bottom otter trawls are associated with the lowest and highest overfishing, respectively. The contrasts of fishing intensity at local scales captured by the HP index suggest that accounting for the local potential fish production can promote fisheries sustainability in the context of ecosystem-based fisheries management as required by international marine policies

Using ecological models to assess ecosystem status in support of the European Marine Strategy Framework Directive

© 2015 The Authors. Published by Elsevier Ltd. The European Union's Marine Strategy Framework Directive (MSFD) seeks to achieve, for all European seas, "Good Environmental Status" (GEnS), by 2020. Ecological models are currently one of the strongest approaches used to predicting and understanding the consequences of anthropogenic and climate-driven changes in the natural environment. We assess the most commonly used capabilities of the modelling community to provide information about indicators outlined in the MSFD, particularly on biodiversity, food webs, non-indigenous species and seafloor integrity descriptors. We built a catalogue of models and their derived indicators to assess which models were able to demonstrate: (1) the linkages between indicators and ecosystem structure and function and (2) the impact of pressures on ecosystem state through indicators. Our survey identified 44 ecological models being implemented in Europe, with a high prevalence of those that focus on links between hydrodynamics and biogeochemistry, followed by end-to-end, species distribution/habitat suitability, bio-opt ical (remote sensing) and multispecies models. Approximately 200 indicators could be derived from these models, the majority of which were biomass and physical/hydrological/chemical indicators. Biodiversity and food webs descriptors, with ∼49% and ∼43% respectively, were better addressed in the reviewed modelling approaches than the non-indigenous species (0.3%) and sea floor integrity (∼8%) descriptors. Out of 12 criteria and 21 MSFD indicators relevant to the abovementioned descriptors, currently only three indicators were not addressed by the 44 models reviewed. Modelling approaches showed also the potential to inform on the complex, integrative ecosystem dimensions while addressing ecosystem fundamental properties, such as interactions between structural components and ecosystems services provided, despite the fact that they are not part of the MSFD indicators set. The cataloguing of models and their derived indicators presented in this study, aim at helping the planning and integration of policies like the MSFD which require the assessment of all European Seas in relation to their ecosystem status and pressures associated and the establishment of environmental targets (through the use of indicators) to achieve GEnS by 2020

Estudio de Seeing en la Zona del Cerro Champaquí (I)

Resumen: Se reportan los resultados del estudio más reciente de seeing que hemos realizado en la zona del Cerro Champaquí (2800 m) en el cordón de las Sierras Grandes en la Provincia de Córdoba. Se describe además, el dispositivo DIMM de alta frecuencia construido para este trabajo. Este instrumento se empleó en otros muestreos de seeing realizados en las provincias de San Juan y San Luis como parte de un proyecto de búsqueda de sitios con muy baja turbulencia atmosférica y adecuados para observaciones con óptica activa y adaptable en el rango infrarrojo cercano, iniciado en 2006. Dos de estos sitios han sido monitoreados un total de 46 noches distribuidas en seis meses del periodo 2011-2012. Los resultados indican que se darían condiciones de seeing estable, inferior al segundo de arco por prolongados períodos de tiempo, en al menos un sitio del cordón montañoso del SO de Córdoba y NE de San Luis.Abstract: Abstract. We report the results of the most recent seeing feasibility study performed in the region of Cerro Champaquí (2800 m) at the mountain range of Sierras Grandes at the Province of Córdoba. We also describe the high frequency DIMM device built for this and other seeing samplings obtained at the provinces of San Juan, San Luis and Córdoba. This work is part of a long term project started in 2006, in search of sites of very low turbulence and suited for near infrared telescopes with active and adaptive optics. Two of the sites have been monitored during a total of 46 nights distributed in six months of the period 2011-2012. The preliminary results suggest the existence of ‘sub-arcsecond’ seeing conditions during extended periods of time in at least one location in the mountain range in the SW of Córdoba and NE of San Luis provinces.www.astronomiaargentina.orgpublishedVersionFil: Díaz, Rubén Joaquín. Universidad Nacional de Córdoba. Observatorio Astronómico de Córdoba; Argentina.Fil: Díaz, Rubén Joaquín. Conicet, Instituto de Ciencias Astronómicas, de la Tierra y del Espacio. Argentina.Meteorología y Ciencias Atmosférica

Kinetic Mechanism of the Ca2+-Dependent Switch-On and Switch-Off of Cardiac Troponin in Myofibrils

The kinetics of Ca2+-dependent conformational changes of human cardiac troponin (cTn) were studied on isolated cTn and within the sarcomeric environment of myofibrils. Human cTnC was selectively labeled on cysteine 84 with N-((2-(iodoacetoxy)ethyl)-N-methyl)amino-7-nitrobenz-2-oxa-1,3-diazole and reconstituted with cTnI and cTnT to the cTn complex, which was incorporated into guinea pig cardiac myofibrils. These exchanged myofibrils, or the isolated cTn, were rapidly mixed in a stopped-flow apparatus with different [Ca2+] or the Ca2+-buffer 1,2-Bis(2-aminophenoxy)ethane-N,N,N′,N′-tetraacetic acid to determine the kinetics of the switch-on or switch-off, respectively, of cTn. Activation of myofibrils with high [Ca2+] (pCa 4.6) induced a biphasic fluorescence increase with rate constants of >2000 s−1 and ∼330 s−1, respectively. At low [Ca2+] (pCa 6.6), the slower rate was reduced to ∼25 s−1, but was still ∼50-fold higher than the rate constant of Ca2+-induced myofibrillar force development measured in a mechanical setup. Decreasing [Ca2+] from pCa 5.0–7.9 induced a fluorescence decay with a rate constant of 39 s−1, which was approximately fivefold faster than force relaxation. Modeling the data indicates two sequentially coupled conformational changes of cTnC in myofibrils: 1), rapid Ca2+-binding (kB ≈ 120 μM−1 s−1) and dissociation (kD ≈ 550 s−1); and 2), slower switch-on (kon = 390s−1) and switch-off (koff = 36s−1) kinetics. At high [Ca2+], ∼90% of cTnC is switched on. Both switch-on and switch-off kinetics of incorporated cTn were around fourfold faster than those of isolated cTn. In conclusion, the switch kinetics of cTn are sensitively changed by its structural integration in the sarcomere and directly rate-limit neither cardiac myofibrillar contraction nor relaxation

Mechanical and kinetic effects of shortened tropomyosin reconstituted into myofibrils

The effects of tropomyosin on muscle mechanics and kinetics were examined in skeletal myofibrils using a novel method to remove tropomyosin (Tm) and troponin (Tn) and then replace these proteins with altered versions. Extraction employed a low ionic strength rigor solution, followed by sequential reconstitution at physiological ionic strength with Tm then Tn. SDS-PAGE analysis was consistent with full reconstitution, and fluorescence imaging after reconstitution using Oregon-green-labeled Tm indicated the expected localization. Myofibrils remained mechanically viable: maximum isometric forces of myofibrils after sTm/sTn reconstitution (control) were comparable (~84%) to the forces generated by non-reconstituted preparations, and the reconstitution minimally affected the rate of isometric activation (kact), calcium sensitivity (pCa50), and cooperativity (nH). Reconstitutions using various combinations of cardiac and skeletal Tm and Tn indicated that isoforms of both Tm and Tn influence calcium sensitivity of force development in opposite directions, but the isoforms do not otherwise alter cross-bridge kinetics. Myofibrils reconstituted with Δ23Tm, a deletion mutant lacking the second and third of Tm’s seven quasi-repeats, exhibited greatly depressed maximal force, moderately slower kact rates and reduced nH. Δ23Tm similarly decreased the cooperativity of calcium binding to the troponin regulatory sites of isolated thin filaments in solution. The mechanisms behind these effects of Δ23Tm also were investigated using Pi and ADP jumps. Pi and ADP kinetics were indistinguishable in Δ23Tm myofibrils compared to controls. The results suggest that the deleted region of tropomyosin is important for cooperative thin filament activation by calcium