Structure, Transport and Magnetic properties in La2x_{2x}Sr2−2x_{2-2x}Co2x_{2x}Ru2−2x_{2-2x}O6_{6}

The perovskite solid solutions of the type La$_{2x}$Sr$_{2-2x}$Co$_{2x}$Ru$_{2-2x}$O$_{6}$ with 0.25 $\leq$ x $\leq$ 0.75 have been investigated for their structural, magnetic and transport properties. All the compounds crystallize in double perovskite structure. The magnetization measurements indicate a complex magnetic ground state with strong competition between ferromagnetic and antiferromagnetic interactions. Resistivity of the compounds is in confirmation with hopping conduction behaviour though differences are noted especially for $x$ = 0.4 and 0.6. Most importantly, low field (50Oe) magnetization measurements display negative magnetization during the zero field cooled cycle. X-ray photoelectron spectroscopy measurements indicate presence of Co$^{2+}$/Co$^{3+}$ and Ru$^{4+}$/Ru$^{5+}$ redox couples in all compositions except $x$ = 0.5. Presence of magnetic ions like Ru$^{4+}$ and Co$^{3+}$ gives rise to additional ferromagnetic (Ru-rich) and antiferromagnetic sublattices and also explains the observed negative magnetization.Comment: Accepted for publication in J. Magn. Magn. Mate

Tracking and imaging gamma ray experiment (TIGRE) for 1 to 100 MEV gamma ray astronomy

A large international collaboration from the high energy astrophysics community has proposed the Tracking and Imaging Gamma Ray Experiment (TIGRE) for future space observations. TIGRE will image and perform energy spectroscopy measurements on celestial sources of gamma rays in the energy range from 1 to 100 MeV. This has been a difficult energy range experimentally for gamma ray astronomy but is vital for the future considering the recent exciting measurements below 1 and above 100 MeV. TIGRE is both a double scatter Compton and gamma ray pair telescope with direct imaging of individual gamma ray events. Multi‐layers of Si strip detectors are used as Compton and pair converters CsI(Tl) scintillation detectors are used as a position sensitive calorimeter. Alternatively, thick GE strip detectors may be used for the calorimeter. The Si detectors are able to track electrons and positrons through successive Si layers and measure their directions and energy losses. Compton and pair events are completely reconstructed allowing each event to be imaged on the sky. TIGRE will provide an order‐of‐magnitude improvement in discrete source sensitivity in the 1 to 100 MeV energy range and determine spectra with excellent energy and excellent angular resolutions. It’s wide field‐of‐view of π sr permits observations of the entire sky for extended periods of time over the life of the mission

SNP selection for genes of iron metabolism in a study of genetic modifiers of hemochromatosis

<p>Abstract</p> <p>Background</p> <p>We report our experience of selecting tag SNPs in 35 genes involved in iron metabolism in a cohort study seeking to discover genetic modifiers of hereditary hemochromatosis.</p> <p>Methods</p> <p>We combined our own and publicly available resequencing data with HapMap to maximise our coverage to select 384 SNPs in candidate genes suitable for typing on the Illumina platform.</p> <p>Results</p> <p>Validation/design scores above 0.6 were not strongly correlated with SNP performance as estimated by Gentrain score. We contrasted results from two tag SNP selection algorithms, LDselect and Tagger. Varying r²from 0.5 to 1.0 produced a near linear correlation with the number of tag SNPs required. We examined the pattern of linkage disequilibrium of three levels of resequencing coverage for the transferrin gene and found HapMap phase 1 tag SNPs capture 45% of the ≥ 3% MAF SNPs found in SeattleSNPs where there is nearly complete resequencing. Resequencing can reveal adjacent SNPs (within 60 bp) which may affect assay performance. We report the number of SNPs present within the region of six of our larger candidate genes, for different versions of stock genotyping assays.</p> <p>Conclusion</p> <p>A candidate gene approach should seek to maximise coverage, and this can be improved by adding to HapMap data any available sequencing data. Tag SNP software must be fast and flexible to data changes, since tag SNP selection involves iteration as investigators seek to satisfy the competing demands of coverage within and between populations, and typability on the technology platform chosen.</p

Recurrent disturbances and the degradation of hard coral communities in Taiwan

Recurrent disturbances can have a critical effect on the structure and function of coral reef communities. In this study, long-term changes were examined in the hard coral community at Wanlitung, in southern Taiwan, between 1985 and 2010. In this 26 year interval, the reef has experienced repeated disturbances that include six typhoons and two coral-bleaching events. The frequency of disturbance has meant that species susceptible to disturbance, such as those in the genus Acropora and Montipora have almost disappeared from the reef. Indeed, almost all hard coral species have declined in abundance, with the result that total hard coral cover in 2010 (17.7%) was less than half what it was in 1985 (47.5%). In addition, macro-algal cover has increased from 11.3% in 2003 to 28.5% in 2010. The frequency of disturbance combined with possible chronic influence of a growing human population mean that a diverse reef assemblage is unlikely to persist on this reef into the future

Direct synthesis of amides from nonactivated carboxylic acids using urea as nitrogen source and Mg(NO₃)₂ or imidazole as catalysts

A new method for the direct synthesis of primary and secondary amides from carboxylic acids is described using Mg(NO3)2·6H2O or imidazole as a low-cost and readily available catalyst, and urea as a stable, and easy to manipulate nitrogen source. This methodology is particularly useful for the direct synthesis of primary and methyl amides avoiding the use of ammonia and methylamine gas which can be tedious to manipulate. Furthermore, the transformation does not require the employment of coupling or activating agents which are commonly required

Do radial oxygen loss and external aeration affect iron plaque formation and arsenic accumulation and speciation in rice?

Hydroponic experiments were conducted to investigate the effect of radial oxygen loss (ROL) and external aeration on iron (Fe) plaque formation, and arsenic (As) accumulation and speciation in rice (Oryza sativa L.). The data showed that there were significant correlations between ROL and Fe concentrations in Fe plaque produced on different genotypes of rice. There were also significant differences in the amounts of Fe plaque formed between different genotypes in different positions of roots and under different aeration conditions (aerated, normal, and stagnant treatments). In aerated treatments, rice tended to have a higher Fe plaque formation than in a stagnant solution, with the greatest formation at the root tip decreasing with increasing distances away, in accordance with a trend of spatial ROL. Genotypes with higher rates of ROL induced higher degrees of Fe plaque formation. Plaques sequestered As on rice roots, with arsenate almost double that with arsenite, leading to decreased As accumulation in both roots and shoots. The major As species detected in roots and shoots was arsenite, ranging from 34 to 78% of the total As in the different treatments and genotypes. These results contribute to our understanding of genotypic differences in As uptake by rice and the mechanisms causing rice genotypes with higher ROL to show lower overall As accumulation

Clinical management and microscopic characterisation of fatique-induced failure of a dental implant. Case report

BACKGROUND: Osseointegrated endosseous implants are widely used for the rehabilitation of completely and partially edentulous patients, being the final prosthodontic treatment more predictable and the failures extremely infrequent. A case of fracture of an endosseous dental implant, replacing the maxillary first molar, occurring in a middle-age woman, 5 years after placement is reported. MATERIALS AND METHODS: The difficult management of this rare complication of implant dentistry together with the following rehabilitation is described. Additionally, the authors performed an accurate analysis of the removed fractured implant both by the stereomicroscope and by the confocal laser scanning microscope. RESULTS AND DISCUSSION: The fractured impant showed the typical signs of a fatigue-induced fracture in the coronal portion of the implant together with numerous micro-fractures in the apical one. Three dimensional imaging performed by confocal laser scanning microscope led easily to a diagnosis of "fatigue fracture" of the implant. The biomechanical mechanism of implant fractures when overstress of the implant components due to bending overload is discussed. CONCLUSION: When a fatigue-induced fracture of an dental implant occurs in presence of bending overload, the whole implant suffers a deformation that is confirmed by the alterations (micro-fractures) of the implant observable also in the osseointegrated portion that is easily appraisable by the use of stereomicroscope and confocal laser scanning microscope without preparation of the sample

Mediating role of arsenic in the relationship between diet and pregnancy outcomes: prospective birth cohort in Bangladesh

BackgroundEpidemiological evidence suggests that arsenic (As) exposure during pregnancy may reduce infant birth weight. One significant source of As exposure is diet; thus, As may indirectly affect infant growth by mediating the effect of maternal diet on birth weight (BW). This study evaluated the potential mediating effect of As in the relationship between maternal diet and BW, gestational age (GA), and gestational weight gain (GWG).MethodThe study used a prospective birth cohort in Bangladesh that captured the dietary habits of 1057 pregnant women through validated semi-quantitative food frequency questionnaires. We applied a causal mediation model with counterfactual approach and performed analyses with and without adjustment for total energy intake. Other potential confounders captured by self-report questionnaire were exposure to secondhand tobacco smoke, betel nut chewing, maternal age, education level, household income level, physical activity level during pregnancy, and daily hours spent cooking over open fire.ResultNo association was found between maternal toenail As and BW. Higher absolute and energy-adjusted protein, fat and fiber intakes were associated with higher toenail As and lower GA and GWG, while higher absolute and energy-adjusted carbohydrate intake was associated with lower toenail As and greater GA and GWG. Mediation analysis showed significant natural indirect effects by toenail As in the relationships between absolute fat, carbohydrate and fiber intake with GA. Specifically, 3% (95% CI: 1-6%) of the association between carbohydrate intake and GA was mediated by change in toenail As, 6% (95% CI: 1-9%) for absolute fat intake and 10% (95% CI: 4-13%) for absolute fiber intake. After adjusting for total energy, no significant mediating effect was observed, suggesting the mediating effect might be due to measurement error or that absolute amount of As exposure rather than the amount in relationship to total energy intake was a more important factor to consider when understanding the negative implication of As on fetal growth.ConclusionThe mediating effect of As in the relationship between maternal diet and birth outcome was small and might be due to measurement error

Description and evaluation of a bench porcine model for teaching surgical residents vascular anastomosis skills

<p>Abstract</p> <p>Background</p> <p>Numerous models, of variable quality, exist to impart the complex skills required to perform vascular anastomosis. These models differ with regard to the kinds of materials used, as well as their sizes, the time needed for their preparation, their availability, and the associated costs. The present study describes a bench model that uses formalin-fixed porcine aorta, and its evaluation by young surgical residents during a recent skills course.</p> <p>Findings</p> <p>The aortic segments used were a by-product of slaughtering. They were fixed and stored after harvesting for eventual use. Ten young surgical residents participated, and each performed one end-to-side vascular anastomosis. The evaluation was a questionnaire maintaining anonymity of the participant containing questions addressing particular aspects of the model and the experiences of the trainee, along with their ratings concerning the need for a training course to learn vascular anastomosis techniques. The scoring on the survey was done using a global 6-point rating scale (Likert Scale). In addition, we ranked the present model by reviewing the current literature for models that address vascular anastomosis skills.</p> <p>The trainees who participated were within their first two years of training (1.25 ± 0.46). A strong agreement in terms of the necessity of training for vascular anastomosis techniques was evident among the participating trainees (5.90 ± 0.32), who had only few prior manual experiences (total number 1.50 ± 0.53). The query revealed a strong agreement that porcine aorta is a suitable model that fits the needs for training vascular anastomosis skills (5.70 ± 0.48). Only a few bench models designed to teach surgical residents vascular anastomosis techniques were available in the literature.</p> <p>Conclusions</p> <p>The preparatory and financial resources needed to perform anastomosis skills training using porcine aorta are few. The presented bench model appears to be appropriate for learning vascular anastomosis skills, as rated by the surgical trainees themselves.</p

Método automático de clasificación de color en dientes humanos usando aprendizaje de máquina

Trabajo de InvestigaciónActualmente el proceso de identificación del color de los dientes para la fabricación de prótesis dentales es realizado manualmente por un experto que, utilizando un método de identificación visual, determina el color de las piezas dentales en la boca del paciente, usando guías de color como la VITA®. A pesar de que el método visual es el más utilizado para la identificación del color de dientes, este se ve afectado por distintas variables tales como: el cansancio del experto, la luminosidad en el ambiente, salud visual del especialista, entre otras que influyen en la identificación del color en los dientes. Los errores en la clasificación del color de los dientes pueden generar pérdidas de tiempo lo que implicaría en consecuencia sobrecostos que afectarían directamente al fabricante y la satisfacción final del cliente.1. Planteamiento del problema 2. Pregunta de investigación 3. Objetivos 4. Estado del arte 5. Marco de referencia 6. Alcances y limitaciones 7. Metodología 8. Diseño metodológico 9. Discusión y resultados 10. Conclusiones 11. Trabajos futuros 12. Bibliografía 13. ANEXOSPregradoIngeniero de Sistema