323 research outputs found
Reconstitution par arbres de régression du rayonnement visible descendant horaire sur la France continentale, à partir de données in situ et de simulations : Spatialisation et vérification sur des données indépendantes
49 p.La nécessité de disposer sur toute la France de séries horaires de rayonnement visible descendant a mené à une reconstitution en deux étapes, à partir de paramètres facilement disponibles : * Une reconstitution en des points où sont disponibles la durée d'insolation, éventuellement des résultats de simulations Safran et des observations de nature et d'étendue des couches nuageuses. La méthode de reconstitution employée est basée sur des moyennes d'ensembles d'arbres de régression. Cette méthode permet de prendre en compte les non linéarités entre les divers intrants météorologiques. Elle est comparée avec d'autres ajustements non-linéaires. Les critères de choix entre les divers algorithmes statistiques sont : la qualité des résultats, la rapidité des apprentissages et la facilité des maintenances logicielles. On n'a pas rencontré de contradiction entre ces 3 critères. Des liaisons sont d'abord établies entre le rayonnement horaire et les autres paramètres météorologiques sur toutes les stations disposant de l'intégralité des données nécessaires. Elles sont d'abord testées par des méthodes de cross-validation sur ces mêmes stations, puis appliquées en tous les points disposant de mesure simultanées de durée d'insolation et de nébulosité (environ un par département). Ces pseudo-observations supplémentaires viennent compléter le réseau d'observations de rayonnement horaire, dont la répartition spatiale est très irrégulière. * La spatialisation à l'échelle de Safran (maille de 8'8km) est alors effectuée par krigeage ordinaire. La validation de ces traitements a porté sur 11 stations indépendantes, non gérées par Météo-France, et sur une période (2004) n'ayant servi à aucun réglage
Modelling the water budget and the riverflows of the Maritsa basin in Bulgaria
International audienceA soil-vegetation-atmosphere transfer model coupled with a macroscale distributed hydrological model was used in order to simulate the water cycle for a large region in Bulgaria. To do so, an atmospheric forcing was built for two hydrological years (1 October 1995 to 30 September 1997), at an eight km resolution. It was based on the data available at the National Institute of Meteorology and Hydrology (NIMH) of Bulgaria. Atmospheric parameters were carefully checked and interpolated with a high level of detail in space and time (3-h step). Comparing computed Penman evapotranspiration versus observed pan evaporation validated the quality of the implemented forcing. The impact of the human activities on the rivers (especially hydropower or irrigation) was taken into account. Some improvements of the hydrometeorological model were made: for better simulation of summer riverflow, two additional reservoirs were added to simulate the slow component of the runoff. Those reservoirs were calibrated using the observed data of the 1st year, while the 2nd year was used for validation. 56 hydrologic stations and 12 dams were used for the model calibration while 41 rivergages were used for the validation of the model. The results compare well with the daily-observed discharges, with good results obtained over more than 25% of the rivergages. The simulated snow depth was compared to daily measurements at 174 stations and the evolution of the snow water equivalent was validated at 5 sites. The process of melting and refreezing of snow was found to be important on this region. The comparison of the normalized values of simulated versus measured soil moisture showed good correlation. The surface water budget shows large spatial variations due to the elevation influence on the precipitations, soil properties and vegetation variability. An inter annual difference was observed in the water cycle as the first year was more influenced by Mediterranean climate, while the second year was characterised by continental influence. Energy budget shows a dominating sensible heat component in summer, due to the fact that the water stress limits the evaporation. This study is a first step for the implementation of an operational hydrometeorological model that could be used for real time monitoring and forecast the water budget and the riverflow of Bulgaria
What causes the inverse relationship between primary production and export efficiency in the Southern Ocean?
The ocean contributes to regulating atmospheric CO2 levels, partly via variability in the fraction of primary production (PP) which is exported out of the surface layer (i.e. the e-ratio). Southern Ocean studies have found that, contrary to global scale analyses, an inverse relationship exists between e-ratio and PP. This relationship remains unexplained, with potential hypotheses being i) large export of dissolved organic carbon (DOC) in high PP areas, ii) strong surface microbial recycling in high PP regions and/ or iii) grazing mediated export varies inversely with PP. We find that the export of DOC has a limited influence in setting the negative e-ratio/PP relationship. However, we observed that at sites with low PP and high e-ratios, zooplankton mediated export is large and surface microbial abundance low suggesting that both are important drivers of the magnitude of the e-ratio in the Southern Ocean
El Niño‐driven oxygenation impacts Peruvian shelf iron supply to the South Pacific Ocean
Upwelling ocean currents associated with oxygen minimum zones (OMZs) supply nutrients fuelling intense marine productivity. Perturbations in the extent and intensity of OMZs are projected in the future, but it is currently uncertain how this will impact fluxes of redox‐sensitive trace metal micronutrients to the surface ocean. Here we report seawater concentrations of Fe, Mn, Co, Cd, and Ni alongside the redox indicator iodide/iodate in the Peruvian OMZ during the 2015 El Niño event. The El Niño drove atypical upwelling of oxygen‐enriched water over the Peruvian Shelf, resulting in oxidized iodine and strongly depleted Fe (II), total dissolved Fe, and reactive particulate Fe concentrations relative to non‐El Niño conditions. Observations of Fe were matched by the redox‐sensitive micronutrients Co and Mn, but not by non‐redox‐sensitive Cd and Ni. These observations demonstrate that oxygenation of OMZs significantly reduces water column inventories of redox‐sensitive micronutrients, with potential impacts on ocean productivity.
Plain Language Summary
Some trace metals, including iron, are essential micronutrients for phytoplankton growth. However, the solubility of iron is very low under oxygenated conditions. Consequently, restricted iron availability in oxygen‐rich seawater can limit phytoplankton growth in the ocean, including in the Eastern Tropical South Pacific. Under typical conditions, depleted oxygen on the South American continental shelf is generally thought to enhance iron supply to the ocean, fuelling phytoplankton productivity in overlying waters. However, the impact of changes in oxygenation, which are predicted to occur in the future, are not known. The 2015 El Niño event led to unusually high oxygen on the Peruvian shelf, offering a system‐scale test on how oxygen influences seawater iron concentrations. We show that El Niño‐driven oxygenation resulted in marked decreases in iron and other metals sensitive to oxygen (cobalt and manganese), whilst metals not sensitive to oxygen (cadmium and nickel) were unaffected. The measured reductions in iron may have led to decreased phytoplankton productivity
From Cellulose Dissolution and Regeneration to Added Value Applications — Synergism Between Molecular Understanding and Material Development
Modern society is now demanding “greener” materials due to depleting fossil fuels and increasing environmental awareness. In the near future, industries will need to become more resource-conscious by making greater use of available renewable and sustainable raw materials. In this context, agro-forestry and related industries can indeed contribute to solve many resource challenges for society and suppliers in the near future. Thus, cellulose can be predicted to become an important resource for materials due to its abundance and versatility as a biopolymer. Cellulose is found in many different forms and applications. However, the dissolution and regeneration of cellulose are key (and challenging) aspects in many potential applications. This chapter is divided into two parts: (i) achievements in the field of dissolution and regeneration of cellulose including solvents and underlying mechanisms of dissolution; and (ii) state-of-the-art production of value-added materials and their applications including manmade textile fibers, hydrogels, aerogels, and all-cellulose composites, where the latter is given special attention
Chapter From Cellulose Dissolution and Regeneration to Added Value Applications — Synergism Between Molecular Understanding and Material Development
Laser ablation (LA) and spark discharge (SD) techniques are commonly used for nanoparticle (NP) formation. The produced NPs have found numerous applications in such areas as electronics, biomedicine, textile production, etc. Previous studies provide us information about the amount of NPs, their size distribution, and possible applications. On one hand, the main advantage of the LA method is in the possibilities of changing laser parameters and background conditions and to ablate materials with complicated stoichiometry. On the other hand, the major advantage of the SD technique is in the possibility of using several facilities in parallel to increase the yield of nanoparticles. To optimize these processes, we consider different stages involved and analyze the resulting plasma and nanoparticle (NP) parameters. Based on the performed calculations, we analyze nanoparticle properties, such as mean size and mean density. The performed analysis (shows how the experimental conditions are connected with the resulted nanoparticle characteristics in agreement with several previous experiments. Cylindrical plasma column expansion and return are shown to govern primary nanoparticle formation in spark discharge, whereas hemispherical shock describes quite well this process for nanosecond laser ablation at atmospheric pressure. In addition, spark discharge leads to the oscillations in plasma properties, whereas monotonous behavior is characteristic for nanosecond laser ablation. Despite the difference in plasma density and time evolutions calculated for both phenomena, after well-defined delays, similar critical nuclei have been shown to be formed by both techniques. This result is attributed to the fact that whereas larger evaporation rate is typical for nanosecond laser ablation, a mixture of vapor and background gas determines the supersaturation in the case of spark
Quantifying the time lag between organic matter production and export in the surface ocean: Implications for estimates of export efficiency
The ocean's potential to export carbon to depth partly depends on the fraction of primary production (PP) sinking out of the euphotic zone (i.e., the e-ratio). Measurements of PP and export flux are often performed simultaneously in the field, although there is a temporal delay between those parameters. Thus, resulting e-ratio estimates often incorrectly assume an instantaneous downward export of PP to export flux. Evaluating results from four mesocosm studies, we find that peaks in organic matter sedimentation lag chlorophyll a peaks by 2 to 15 days. We discuss the implications of these time lags (TLs) for current e-ratio estimates and evaluate potential controls of TL. Our analysis reveals a strong correlation between TL and the duration of chlorophyll a buildup, indicating a dependency of TL on plankton food web dynamics. This study is one step further toward time-corrected e-ratio estimate
Effects of 238U variability and physical transport on water column 234Th downward fluxes in the coastal upwelling system off Peru
The eastern boundary region of the southeastern Pacific Ocean hosts one of the world's most dynamic and productive upwelling systems with an associated oxygen minimum zone (OMZ). The variability in downward export fluxes in this region, with strongly varying surface productivity, upwelling intensities and water column oxygen content, is however poorly understood. Thorium-234 (234Th) is a powerful tracer to study the dynamics of export fluxes of carbon and other elements, yet intense advection and diffusion in nearshore environments impact the assessment of depth-integrated 234Th fluxes when not properly evaluated. Here we use vessel-mounted acoustic Doppler current profiler (VmADCP) current velocities, satellite wind speed and in situ microstructure measurements to determine the magnitude of advective and diffusive fluxes over the entire 234Th flux budget at 25 stations from 11 to 16∘ S in the Peruvian OMZ. Contrary to findings along the GEOTRACES P16 eastern section, our results showed that weak surface wind speed during our cruises induced low upwelling rates and minimal upwelled 234Th fluxes, whereas vertical diffusive 234Th fluxes were important only at a few shallow shelf stations. Horizontal advective and diffusive 234Th fluxes were negligible because of small alongshore 234Th gradients. Our data indicated a poor correlation between seawater 238U activity and salinity. Assuming a linear relationship between the two would lead to significant underestimations of the total 234Th flux by up to 40 % in our study. Proper evaluation of both physical transport and variability in 238U activity is thus crucial in coastal 234Th flux studies. Finally, we showed large temporal variations on 234Th residence times across the Peruvian upwelling zone and cautioned future carbon export studies to take these temporal variabilities into consideration while evaluating carbon export efficiency
Segmentation of the Himalayas as revealed by arc-parallel gravity anomalies
International audienceLateral variations along the Himalayan arc are suggested by an increasing number of studies and carry important information about the orogen’s segmentation. Here we compile the hitherto most complete land gravity dataset in the region which enables the currently highest resolution plausible analysis. To study lateral variations in collisional structure we compute arc-parallel gravity anomalies (APaGA) by subtracting the average arc-perpendicular profile from our dataset; we compute likewise for topography (APaTA). We find no direct correlation between APaGA, APaTA and background seismicity, as suggested in oceanic subduction context. In the Himalayas APaTA mainly reflect relief and erosional effects, whereas APaGA reflect the deep structure of the orogen with clear lateral boundaries. Four segments are outlined and have disparate flexural geometry: NE India, Bhutan, Nepal & India until Dehradun, and NW India. The segment boundaries in the India plate are related to inherited structures, and the boundaries of the Shillong block are highlighted by seismic activity. We find that large earthquakes of the past millennium do not propagate across the segment boundaries defined by APaGA, therefore these seem to set limits for potential rupture of megathrust earthquakes
- …