270 research outputs found
An integrated eddy current detection and imaging system on a silicon chip
Eddy current probes have been used for many years for numerous sensing applications including crack detection in metals. However, these applications have traditionally used the eddy current effect in the form of a physically wound single or different probe pairs which of necessity must be made quite large compared to microelectronics dimensions. Also, the traditional wound probe can only take a point reading, although that point might include tens of individual cracks or crack arrays; thus, conventional eddy current probes are beset by two major problems: (1) no detailed information can be obtained about the crack or crack array; and (2) for applications such as quality assurance, a vast amount of time must be taken to scan a complete surface. Laboratory efforts have been made to fabricate linear arrays of single turn probes in a thick film format on a ceramic substrate as well as in a flexible cable format; however, such efforts inherently suffer from relatively large size requirements as well as sensitivity issues. Preliminary efforts to fully extend eddy current probing from a point or single dimensional level to a two dimensional micro-eddy current format on a silicon chip, which might overcome all of the above problems, are presented
Coaxial multi-mode cavities for fundamental SRF research in an unprecedented parameter space
Recent developments in superconducting radio-frequency (SRF) research have
focused primarily on high frequency elliptical cavities for electron
accelerators. Advances have been made in both reducing RF surface resistance
and pushing the readily achievable accelerating gradient by using novel SRF
cavity treatments including surface processing, custom heat treatments, and
flux expulsion. Despite the global demand for SRF based hadron accelerators,
the advancement of TEM mode cavities has lagged behind. To address this, two
purpose-built research cavities, one quarter-wave and one half-wave resonator,
have been designed and built to allow characterization of TEM-mode cavities
with standard and novel surface treatments. The cavities are intended as the
TEM mode equivalent to the 1.3GHz single cell cavity, which is the essential
tool for high frequency cavity research. Given their coaxial structure, the
cavities allow testing at the fundamental mode and higher harmonics, giving
unique insight into the role of RF frequency on fundamental loss mechanisms
from intrinsic and extrinsic sources. In this paper, the cavities and testing
infrastructure are described and the first performance measurements of both
cavities are presented
Magnetic resonance imaging of the neuroprotective effect of xaliproden in rats
RATIONALE AND OBJECTIVES: The neurotrophic effect of Xaliproden has been followed using sequential cerebral magnetic resonance imaging (MRI) in rats with vincristine-induced brain lesion as a model of Alzheimer disease.
METHODS: Nineteen rats received an intraseptal injection of vincristine on day 0, followed by a daily gavage with either the vehicle (Tween-20 1%) (n = 10) or Xaliproden (10 mg/kg) (n = 9). Eight sham-operated controls received a daily gavage with either the vehicle (n = 4) or Xaliproden (n = 4). Brain MR imaging was performed at 4.7 T on a Biospec 47/30 MR system before surgery then 3, 7, 10, and 14 days after surgery.
RESULTS: At day 3 following vincristine injection, an increase in MR signal intensity in the septum was observed on T2-weighted images. This increase was maximal at day 10, and remained stable until day 14. Daily treatment with Xaliproden delayed the appearance of hypersignals until day 7 and reduced by Ca. 50% the magnitude of the increase in signal intensity from day 10. No changes were observed in the hippocampus.
CONCLUSION: Quantitative MRI objectifies noninvasively the neuroprotective effect of Xaliproden on rat brain anatomy
Consideration of Freshwater and Multiple Marine Reservoir Effects:Dating of Individuals with Mixed Diets from Northern Sweden
Human burials from the cemetery at the Rounala church, northern Sweden, were radiocarbon (C-14) dated to shed light on the use of the cemetery. Carbon, nitrogen and sulfur stable isotope analysis of bone collagen from 19 distinct individuals indicated that these individuals had a mixed diet consisting of freshwater, marine and terrestrial resources. Dietary modeling using FRUITS was employed to calculate the contributions of the different resources for each individual. These data were then used to calculate individual Delta R values, taking into account freshwater and multiple marine reservoir effects, the latter caused by Baltic and Atlantic marine dietary inputs, respectively. C-14 dating of tissues from modern freshwater fish species demonstrate a lack of a freshwater reservoir effect in the area. Two OxCal models were used to provide endpoint age estimates. The calibrated data suggest that the site's cemetery was most likely in use already from the 14th century, and perhaps until at least the late 18th century
Progress Report on Target Development
The present document is the D08 deliverable report of work package 1 (Target Development) from the MEGAPIE TEST project of the 5th European Framework Program. Deliverable D08 is the progress report on the activities performed within WP 1. The due date of this deliverable was the 5th month after the start of the EU project. This coincided with a technical status meeting of the MEGAPIE Initiative, that was held in March 2002 in Bologna (Italy). The content of the present document reflects the status of the MEGAPIE target development at that stage. It gives an overview of the Target Design, the related Design Support activities and the progress of the work done for the safety assessment and licensing of the target
The European project FLOMIX-R: Fluid mixing and flow distribution inthe reactor circuit - Final summary report
The project was aimed at describing the mixing phenomena relevant for both safety analysis, particularly in steam line break and boron dilution scenarios, and mixing phenomena of interest for economical operation and the structural integrity. Measurement data from a set of mixing experiments, gained by using advanced measurement techniques with enhanced resolution in time and space help to improve the basic understanding of turbulent mixing and to provide data for Computational Fluid Dynamics (CFD) code validation. Slug mixing tests simulating the start-up of the first main circulation pump are performed with two 1:5 scaled facilities: The Rossendorf coolant mixing model ROCOM and the VATTENFALL test facility, modelling a German Konvoi type and a Westinghouse type three-loop PWR, respectively. Additional data on slug mixing in a VVER-1000 type reactor gained at a 1:5 scaled metal mock-up at EDO Gidropress are provided. Experimental results on mixing of fluids with density differences obtained at ROCOM and the FORTUM PTS test facility are made available. Concerning mixing phenomena of interest for operational issues and thermal fatigue, flow distribution data available from commissioning tests (Sizewell-B for PWRs, Loviisa and Paks for VVERs) are used together with the data from the ROCOM facility as a basis for the flow distribution studies. The test matrix on flow distribution and steady state mixing performed at ROCOM comprises experiments with various combinations of running pumps and various mass flow rates in the working loops. Computational fluid dynamics calculations are accomplished for selected experiments with two different CFD codes (CFX-5, FLUENT). Best practice guidelines (BPG) are applied in all CFD work when choosing computational grid, time step, turbulence models, modelling of internal geometry, boundary conditions, numerical schemes and convergence criteria. The BPG contain a set of systematic procedures for quantifying and reducing numerical errors. The knowledge of these numerical errors is a prerequisite for the proper judgement of model errors. The strategy of code validation based on the BPG and a matrix of CFD code validation calculations have been elaborated. Besides of the benchmark cases, additional experiments were calculated by new partners and observers, joining the project later. Based on the "best practice solutions", conclusions on the applicability of CFD for turbulent mixing problems in PWR were drawn and recommendations on CFD modelling were given. The high importance of proper grid generation was outlined. In general, second order discretization schemes should be used to minimise numerical diffusion. First order schemes can provide physically wrong results. With optimised "production meshes" reasonable results were obtained, but due to the complex geometry of the flow domains, no fully grid independent solutions were achieved. Therefore, with respect to turbulence models, no final conclusions can be given. However, first order turbulence models like K-e or SST K-w are suitable for momentum driven slug mixing. For buoyancy driven mixing (PTS scenarios), Reynolds stress models provide better results
Fragile Mental Retardation Protein Interacts with the RNA-Binding Protein Caprin1 in Neuronal RiboNucleoProtein Complexes
Fragile X syndrome is caused by the absence of the Fragile X Mental Retardation Protein (FMRP), an RNA-binding protein. FMRP is associated with messenger RiboNucleoParticles (mRNPs) present in polyribosomes and its absence in neurons leads to alteration in synaptic plasticity as a result of translation regulation defects. The molecular mechanisms by which FMRP plays a role in translation regulation remain elusive. Using immunoprecipitation approaches with monoclonal Ab7G1-1 and a new generation of chicken antibodies, we identified Caprin1 as a novel FMRP-cellular partner. In vivo and in vitro evidence show that Caprin1 interacts with FMRP at the level of the translation machinery as well as in trafficking neuronal granules. As an RNA-binding protein, Caprin1 has in common with FMRP at least two RNA targets that have been identified as CaMKIIα and Map1b mRNAs. In view of the new concept that FMRP species bind to RNA regardless of known structural motifs, we propose that protein interactors might modulate FMRP functions
Dynamics of Disks and Warps
This chapter reviews theoretical work on the stellar dynamics of galaxy
disks. All the known collective global instabilities are identified, and their
mechanisms described in terms of local wave mechanics. A detailed discussion of
warps and other bending waves is also given. The structure of bars in galaxies,
and their effect on galaxy evolution, is now reasonably well understood, but
there is still no convincing explanation for their origin and frequency. Spiral
patterns have long presented a special challenge, and ideas and recent
developments are reviewed. Other topics include scattering of disk stars and
the survival of thin disks.Comment: Chapter accepted to appear in Planets, Stars and Stellar Systems, vol
5, ed G. Gilmore. 32 pages, 17 figures. Includes minor corrections made in
proofs. Uses emulateapj.st
Physiological Correlates of Volunteering
We review research on physiological correlates of volunteering, a neglected but promising research field. Some of these correlates seem to be causal factors influencing volunteering. Volunteers tend to have better physical health, both self-reported and expert-assessed, better mental health, and perform better on cognitive tasks. Research thus far has rarely examined neurological, neurochemical, hormonal, and genetic correlates of volunteering to any significant extent, especially controlling for other factors as potential confounds. Evolutionary theory and behavioral genetic research suggest the importance of such physiological factors in humans. Basically, many aspects of social relationships and social activities have effects on health (e.g., Newman and Roberts 2013; Uchino 2004), as the widely used biopsychosocial (BPS) model suggests (Institute of Medicine 2001). Studies of formal volunteering (FV), charitable giving, and altruistic behavior suggest that physiological characteristics are related to volunteering, including specific genes (such as oxytocin receptor [OXTR] genes, Arginine vasopressin receptor [AVPR] genes, dopamine D4 receptor [DRD4] genes, and 5-HTTLPR). We recommend that future research on physiological factors be extended to non-Western populations, focusing specifically on volunteering, and differentiating between different forms and types of volunteering and civic participation
- …