A Revised Magnetic Polarity Time Scale for the Paleocene and Early Eocene and Implications for Pacific Plate Motion

Magnetostratigraphic studies of a continental sedimentary sequence in the Clark\u27s Fork Basin, Wyoming and a marine sedimentary sequence at Gubbio, Italy indicate that the Paleocene-Eocene boundary occurs just stratigraphically above normal polarity zones correlative with magnetic anomaly 25 chron. These data indicate that the older boundary of anomaly 24 chron is 52.5 Ma. This age is younger than the late Paleocene age assigned by LaBrecque et al. [1977] and also younger than the basal Eocene age assigned by Ness et al. [1980]. A revised magnetic polarity time scale for the Paleocene and early Eocene is presented in this paper. Several changes in the relative motion system between the Pacific plate and neighboring plates occurred in the interval between anomaly 24 and anomaly 21. A major change in absolute motion of the Pacific plate is indicated by the bend in the Hawaiian-Emperor Seamount chain at ∼43 Ma. The revised magnetic polarity time scale indicates that the absolute motion change lags the relative motion changes by only ∼3-5 m.y. rather than by \u3e10 m.y. as indicated by previous polarity time scales

Performance related design and construction of road foundations - review of the recent changes to UK practice

Recently there has been a radical change to incorporate performance related design and com-pliance testing for UK highway foundations. New guidance has been introduced in the Highway Agency's In-terim Advice Note 73/06. The potential rewards of this approach include the wider use of more sustainable marginal materials and savings due to the thinning of the upper structural pavement layers, as well as obtain-ing useful information relating to expected pavement life. This new framework relies heavily on performance-related testing during construction to assess if set performance targets have been met. This in turn requires very clear specifications for construction, to ensure the risks of non-compliance are managed and the potential for dispute is limited. Therefore the use of pre-construction site trials are proposed, which in some cases may be costly or impractical (due to accessibility of the location, or relevance of the subgrade conditions). A more holistic approach to pavement design is provided which whilst providing some benefits has resulted in little guidance on the prediction and management of sub-grade conditions which strongly influence the overall pavement performance. Combining the above with an ‘observational’ method would enhance the performance approach by utilising a greater requirement to understand the site conditions and permit simple and appropri-ate changes to be made during construction to overcome any variability encountered, and ensure small areas of low performance are adequately managed and remediated. This paper describes the development and key elements of the current performance related guidance, and describes case studies for the observational ap-proach used in road construction schemes. It discusses the merits and limitations of both approaches, and pro-poses an appropriate step that could be made to better combine and integrate these procedures into a robust practical method for designing and specifying road foundations for the future

Wedge absorber design and simulation for MICE Step IV

In the Muon Ionization Cooling Experiment (MICE), muons are cooled by passing through material, then through RF cavities to compensate for the energy loss; which reduces the transverse emittance. It is planned to demonstrate longitudinal emittance reduction via emittance exchange in MICE by using a solid wedge absorber in Step IV. Based on the outcome of previous studies, the shape and material of the wedge were chosen. We address here further simulation efforts for the absorber of choice as well as engineering considerations in connection with the absorber support design

Inhibition of SARS-CoV 3C-like Protease Activity by Theaflavin-3,3′-digallate (TF3)

SARS-CoV is the causative agent of severe acute respiratory syndrome (SARS). The virally encoded 3C-like protease (3CL(Pro)) has been presumed critical for the viral replication of SARS-CoV in infected host cells. In this study, we screened a natural product library consisting of 720 compounds for inhibitory activity against 3CL(Pro). Two compounds in the library were found to be inhibitive: tannic acid (IC(50) = 3 µM) and 3-isotheaflavin-3-gallate (TF2B) (IC(50) = 7 µM). These two compounds belong to a group of natural polyphenols found in tea. We further investigated the 3CL(Pro)-inhibitory activity of extracts from several different types of teas, including green tea, oolong tea, Puer tea and black tea. Our results indicated that extracts from Puer and black tea were more potent than that from green or oolong teas in their inhibitory activities against 3CL(Pro). Several other known compositions in teas were also evaluated for their activities in inhibiting 3CL(Pro). We found that caffeine, (—)-epigallocatechin gallte (EGCg), epicatechin (EC), theophylline (TP), catechin (C), epicatechin gallate (ECg) and epigallocatechin (EGC) did not inhibit 3CL(Pro) activity. Only theaflavin-3,3′-digallate (TF3) was found to be a 3CL(Pro) inhibitor. This study has resulted in the identification of new compounds that are effective 3CL(Pro) inhibitors

The design, construction and performance of the MICE scintillating fibre trackers

This is the Pre-print version of the Article. The official published version can be accessed from the link below - Copyright @ 2011 ElsevierCharged-particle tracking in the international Muon Ionisation Cooling Experiment (MICE) will be performed using two solenoidal spectrometers, each instrumented with a tracking detector based on diameter scintillating fibres. The design and construction of the trackers is described along with the quality-assurance procedures, photon-detection system, readout electronics, reconstruction and simulation software and the data-acquisition system. Finally, the performance of the MICE tracker, determined using cosmic rays, is presented.This work was supported by the Science and Technology Facilities Council under grant numbers PP/E003214/1, PP/E000479/1, PP/E000509/1, PP/E000444/1, and through SLAs with STFC-supported laboratories. This work was also supportedby the Fermi National Accelerator Laboratory, which is operated by the Fermi Research Alliance, under contract No. DE-AC02-76CH03000 with the U.S. Department of Energy, and by the U.S. National Science Foundation under grants PHY-0301737,PHY-0521313, PHY-0758173 and PHY-0630052. The authors also acknowledge the support of the World Premier International Research Center Initiative (WPI Initiative), MEXT, Japan

Large-angle production of charged pions by 3 GeV/c - 12 GeV/c protons on carbon, copper and tin targets

A measurement of the double-differential $\pi^{\pm}$ production cross-section in proton--carbon, proton--copper and proton--tin collisions in the range of pion momentum 100 \MeVc \leq p < 800 \MeVc and angle 0.35 \rad \le \theta <2.15 \rad is presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 \GeVc to 12 \GeVc hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was done using a small-radius cylindrical time projection chamber (TPC) placed in a solenoidal magnet. An elaborate system of detectors in the beam line ensured the identification of the incident particles. Results are shown for the double-differential cross-sections at four incident proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc)

Measurement of Muon Neutrino Quasi-Elastic Scattering on Carbon

The observation of neutrino oscillations is clear evidence for physics beyond the standard model. To make precise measurements of this phenomenon, neutrino oscillation experiments, including MiniBooNE, require an accurate description of neutrino charged current quasi-elastic (CCQE) cross sections to predict signal samples. Using a high-statistics sample of muon neutrino CCQE events, MiniBooNE finds that a simple Fermi gas model, with appropriate adjustments, accurately characterizes the CCQE events observed in a carbon-based detector. The extracted parameters include an effective axial mass, M_A^eff = 1.23+/-0.20 GeV, that describes the four-momentum dependence of the axial-vector form factor of the nucleon; and a Pauli-suppression parameter, kappa = 1.019+/-0.011. Such a modified Fermi gas model may also be used by future accelerator-based experiments measuring neutrino oscillations on nuclear targets.Comment: 5 pages, 3 figure

Comparison of large-angle production of charged pions with incident protons on cylindrical long and short targets

The HARP collaboration has presented measurements of the double-differential pi+/pi- production cross-section in the range of momentum 100 MeV/c <= p 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad with proton beams hitting thin nuclear targets. In many applications the extrapolation to long targets is necessary. In this paper the analysis of data taken with long (one interaction length) solid cylindrical targets made of carbon, tantalum and lead is presented. The data were taken with the large acceptance HARP detector in the T9 beam line of the CERN PS. The secondary pions were produced by beams of protons with momenta 5 GeV/c, 8 GeV/c and 12 GeV/c. The tracking and identification of the produced particles were performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident protons were identified by an elaborate system of beam detectors. Results are obtained for the double-differential yields per target nucleon d2 sigma / dp dtheta. The measurements are compared with predictions of the MARS and GEANT4 Monte Carlo simulations.Comment: 43 pages, 20 figure