1,341 research outputs found

    Intermodulation electrostatic force microscopy for imaging surface photo-voltage

    Full text link
    We demonstrate an alternative to Kelvin Probe Force Microscopy for imaging surface potential. The open-loop, single-pass technique applies a low-frequency AC voltage to the atomic force microscopy tip while driving the cantilever near its resonance frequency. Frequency mixing due to the nonlinear capacitance gives intermodulation products of the two drive frequencies near the cantilever resonance, where they are measured with high signal to noise ratio. Analysis of this intermodulation response allows for quantitative reconstruction of the contact potential difference. We derive the theory of the method, validate it with numerical simulation and a control experiment, and we demonstrate its utility for fast imaging of the surface photo-voltage on an organic photo-voltaic material.Comment: 4 pages, 3 figures, peer-reviewed, preprin

    Allozyme diversity and geographic variation in the widespread coastal sedge, Carex arenaria

    Get PDF
    Allozyme electrophoresis was used to investigate the structure of genetic variation in the rhizomatous coastal sedge, Carex arenaria, throughout its European range — from the SW Iberian peninsula to the Baltic region. Material was sampled from 77 sites in five geographic regions. Nine of the 13 investigated loci were polymorphic in the total material and there were interregional differences in the number of polymorphic loci per site and the percentage of variable sites. In the Scandinavia/Baltic region only 61% of the sites contained at least one locus with more than one allele, whereas all the British and SW Iberian sites were variable. There was a general tendency for the regional frequencies of the less common alleles at individual loci to decline from SW to NE. The mean (over loci and sites) within-site gene diversity (H ¯site) was 0.064 (in calculations based on the number of observed multilocus allozyme genotypes within each sampling site). Although there was considerable variation between geographically adjacent sites, within-site diversity showed a general decrease from SW to NE in Europe. There were significant differences in within-region gene diversity (Hreg) for the four most variable loci between the five regions. Hreg generally decreased from SW to NE Europe and most loci showed the highest diversity in the SW Iberian peninsula and the Bay of Biscay regions. The mean (over loci) gene diversity in the total material (Htot) was 0.070 and the levels of diversity in Carex arenaria are substantially lower than is usual in rhizomatous sedges. The within-site, between-site and between-regional components of the total diversity were 92.4%, 2.5% and 5.1%, respectively. The low levels of overall gene diversity in C. arenaria and the successive decrease in diversity from SW to NE are interpreted in terms of the species' history of postglacial spread into northern Europe. Despite the overall northwards decrease in diversity, the widespread occurrence of less common alleles and the lack of regional deviations from Hardy–Weinberg genotype frequency expectations suggest that C. arenaria is not predominantly self-fertilized

    Method of Predicting Obesity Comprising Measuring Neurotensin

    Get PDF
    The presently disclosed subject matter relates to a method for predicting increased risk of obesity on a non-obese subject. More particularly, the presently disclosed subject matter relates to a method of predicting increased risk of obesity in a non-obese subject by determining a level of neurotensin expression in a biological sample from the subject and comparing the level of neurotensin expression in the sample with a control level. The presently disclosed subject matter further relates to a method of preventing and/or treating obesity in a subject in need thereof by administering to the subject an effective amount of an agent that inhibits neurotensin

    English-medium instruction and impact on academic performance: a randomized control study

    Get PDF
    Stakeholders and researchers in higher education have long debated the consequences of English-medium instruction (EMI); a key assumption of EMI is that students\u27 academic learning through English should be at least as good as learning through their first language (usually the national language). This study addressed the following question: “What is the impact from English-medium instruction on students’ academic performance in an online learning environment?” “Academic performance” was measured in two ways: number of correctly answered test questions and through-put/drop-out rate. The study adopted an experimental design involving a large group (n = 2,263) randomized control study in a programming course. Student participants were randomly allocated to an English-medium version of the course (the intervention group) or a Swedish-medium version of the course (the control group). The findings were that students enrolled on the English-medium version of the course answered statistically significantly fewer test questions correctly; the EMI students also dropped out from the course to a statistically significantly higher degree compared to students enrolled on the Swedish version of the course. The conclusion of this study is thus that EMI may, under certain circumstances, have negative consequences for students’ academic performance

    Possible polarisation and spin dependent aspects of quantum gravity

    Full text link
    We argue that quantum gravity theories that carry a Lie algebraic modification of the Poincare' and Heisenberg algebras inevitably provide inhomogeneities that may serve as seeds for cosmological structure formation. Furthermore, in this class of theories one must expect a strong polarisation and spin dependence of various quantum-gravity effects.Comment: Awarded an "honourable mention" in the 2007 Gravity Research Foundation Essay Competitio

    Medical Geology : a globally emerging discipline

    Get PDF
    Medical Geology, the study of the impacts of geologic materials and processes on animal and human health, is a dynamic emerging discipline bringing together the geoscience, biomedical, and public health communities to solve a wide range of environmental health problems. Among the Medical Geology described in this review are examples of both deficiency and toxicity of trace element exposure. Goiter is a widespread and potentially serious health problem caused by deficiency of iodine. In many locations the deficiency is attributable to low concentrations of iodine in the bedrock. Similarly, deficiency of selenium in the soil has been cited as the principal cause of juvenile cardiomyopathy and muscular abnormalities. Overexposure to arsenic is one of the most widespread Medical Geology problems affecting more than one hundred million people in Bangladesh, India, China, Europe, Africa and North and South America. The arsenic exposure is primarily due to naturally high levels in groundwater but combustion of mineralized coal has also caused arsenic poisoning. Dental and skeletal fluorosis also impacts the health of millions of people around the world and, like arsenic, is due to naturally high concentrations in drinking water and, to a lesser extent, coal combustion. Other Medical Geology issues described include geophagia, the deliberate ingestion of soil, exposure to radon, and ingestion of high concentrations of organic compounds in drinking water. Geoscience and biomedical/public health researchers are teaming to help mitigate these health problems as well as various non-traditional issues for geoscientists such as vector-borne diseases

    A novel wear-resistant magnetic thin film material based on a Ti1xFexC1yTi_{1-x}Fe_xC_{1-y} nanocomposite alloy

    Full text link
    In this study we report on the film growth and characterization of thin (approximately 50 nm thick) Ti-Fe-C films deposited on amorphous quartz. The experimental studies have been complemented by first principles density functional theory (DFT) calculations. Upon annealing of as-prepared films, the composition of the metastable Ti-Fe-C film changes. An iron-rich phase is first formed close to the film surface, but with increasing annealing time this phase is gradually displaced toward the film-substrate interface where its position stabilizes. Both the magnetic ordering temperature and the saturation magnetization changes significantly upon annealing. The DFT calculations show that the critical temperature and the magnetic moment both increase with increasing Fe and C-vacancy concentration. The formation of the metastable iron-rich Ti-Fe-C compound is reflected in the strong increase of the magnetic ordering temperature. Eventually, after enough annealing time (10\geq 10 minutes), nano-crystalline α\alpha-Fe starts to precipitate and the amount and size of these precipitates can be controlled by the annealing procedure; after 20 minutes of annealing, the experimental results indicate a nano-crystalline iron-film embedded in a wear resistant TiC compound. This conclusion is further supported by transmission electron microscopy studies on epitaxial Ti-Fe-C films deposited on single crystalline MgO substrates where, upon annealing, an iron film embedded in TiC is formed. Our results suggest that annealing of metastable Ti-Fe-C films can be used as an efficient way of creating a wear-resistant magnetic thin film material.Comment: 23 pages, 13 figure

    Performance evaluation of drinking water treatment plants in Kampala - case of Ggaba II

    Get PDF
    Kampala water treatment plant (Ggaba II) was evaluated in terms of performance, design, operation and maintenance. The evaluation was done across the dry and wet seasons, measuring physical-chemical parameters. Receding water level of Lake Victoria combined with poor quality of water at the intakes affected the supply of water in Kampala and the neighbouring districts. There was considerable increase in the colour of about two fold at the intake works during the period 1997 to 2005 with increased chemical usage to achieve acceptable standards. The conditions of operation and maintenance were also found to be deficient with some design and construction problems as well. The annual mean colour of the finished water was found to be significantly above the National standard value of 15 Ptu with 53.4% of samples not compliant. 21.6% and 9.3% of the samples taken were not compliant with the WHO pH and turbidity values respectively
    corecore