486 research outputs found
The Santee Canal Sanctuary - Part I
A proposed recreational and environment and historical interpretive park has been planned by the South Carolina Department of Parks, Recreation, and Tourism (PRT) jointly with the Santee Cooper Public Service Authority for the land along the west side of the Tailrace Canal extending between US Route 52 and Stoney Landing in Berkeley County, South Carolina. The Santee Canal Sanctuary, as it has been named, encompasses the southernmost ca. 2.0km (1.25mi) of the abandoned Santee Canal and Biggin Creek which essentially bisect the property longitudinally. Development of the park and related construction activities dictated that archaeological investigations be executed. A terrestrial archaeological survey was conducted in August 1986 and the results published the following year in a thorough report produced by Tommy Charles and James O. Mills (1987) of the South Carolina Institute of Archaeology and Anthropology (SCIAA). Dredging operations planned for that portion of the Santee Canal on sanctuary property necessitated a comprehensive archaeological survey within this structure. The entire 32.6km (20.4mi) length of the Santee Canal was placed on the National Register of Historic Places (NRHP) in May 1982 and is listed in the State of South Carolina Site Files as 38BKI02. In addition, two areas of Biggin Creek were singled out for investigation: the remains of an apparently ship-built vessel (38BK877) eligible for inclusion on the NRHP; and an area of scattered artifacts associated with a domestic site (38BK876) at Stoney Landing. PRT and Santee Cooper contracted with SCIAA\u27s Underwater Antiquities Management Program to perform this survey. The archaeological survey conducted as a result of this contract was performed over a 20-day period during November and December 1987
Underwater Archaeological Survey of the Proposed James Island Expressway Corridor Across the Ashley River and Wappoo Creek, Charleston County, S.C.
Between April 15th and May 10th, 1985, Institute personnel directed and carried out an underwater archeological survey of a section of the bottom of the Ashley River and Wappoo Creek where the James Island Bridge is to be constructed (Fig.2). Two types of survey methodology were employed: electronic sensing using a side scan sonar and magnetometer, and a visual investigation of the river and creek bottom using divers. Sonar and magnetometer lines were run up and down the river over a distance of 2,000 yards, covering the impact area where the Ashley River Bridge is to be located. The diver\u27s visual investigation was restricted to a corridor 550 feet wide by the distance across the river. This was the area to be most heavily impacted by the bridge construction activity. In Wappoo Creek, divers investigated a 300 ft corridor across the creek where a section of the bridge is to be built. No remote sensing was carried out in this area because previous channel deepening and widening in the past would have destroyed any significant cultural remains. Through analysis of the records from both electronic and diver investigations, it was determined that there were no discernible archeological or paleontological reasons to delay the construction of the bridge.https://scholarcommons.sc.edu/archanth_books/1188/thumbnail.jp
The historic working small craft of South Carolina : a general typology with a study of adaptations of flatboat design
The following dissertation presents a typology for historic working watercraft of the State of South Carolina, United States of America. The background investigation for this typology addressed research design questions concerning the geographic and ethnic origins of the builders of these craft, the history of transportation growth in the area and other factors which are thought to have influenced basic design, and construction methods. These factors were the environments in which craft operated, the materials and skills available for their construction, and the shapes and eights of typical cargoes they were designed to transport. In addition to
archival sources, data was developed by surveying regions of South Carolina where specific types of craft were known to operate. These areas included lower coastal plain riverine environments, abandoned rice plantations, abandoned ferry crossings, historic canals, and marine phosphate mining areas. Where remains of craft were discovered, a survey was conducted to gather sufficient information to determine the basic design, construction, and function of the vessel. Experimental archaeological projects also were undertaken during the last stages of the research to determine if it were possible to gather viable data concerning
construction economy, construction sequence, and performance. The projects consisted of the construction of one full scale 'replica' rice plantation barge, one full scale 'reconstruction' of an upland cotton boat, and one large scale model of a plantation chine-girder barge. These projects also constituted an examination of the value of experimental archaeology to this type of research. The work also provided an opportunity to compare the relative values of the construction of replicas using historic techniques and materials, versus 'reconstruction' to visually accurate standards using modern materials. It was determined, given certain factors dictated by funding and labor, that experimental archaeology can indeed contribute worthwhile data for research purposes.
The archival and field data generated by this activity were analyzed and a typology developed. It was determined that at least fourteen specific types of paddled or wind and tide driven watercraft were operated in the study area from the pre-historic period to approximately 1930.
These craft included dugout canoes, dugout-form based plantation craft, flat bottomed sailing vessels, round hulled ocean going sailing vessels, barge-form ferry craft, rice flats and phosphate carriers, extreme length-to-beam ratio mountain river craft, and highly specialized canal craft.
The data also indicate that working environments and cargo form were specific and direct influences on watercraft design. In some cases, such as aboriginal dugout canoes produced prior to European contact, ethnic influences were readily discernible. This proved not to be the case after the contact period.
Archival data clearly indicate that both European and Africans and African Americans were engaged in watercraft construction and operation during the study period. Evidence is presented to show that Europeans sought specific skills among imported Africans ranging from the cultivation of agricultural crops to blacksmithing. Further evidence demonstrates African skills in watercraft construction and operation, especially of dugout canoes and dugout based designs. It is hypothesized that craft of these type are most likely to be representative of the craft produced by this ethnic group in South Carolina. This hypothesis is supported by presentation of archival data showing that these types of craft were the vessels of choice of African and African American crews. Further evidence is presented to show that widely ranging European boat building skills also are represented in the archaeological record, including English, French and possibly middle European influences. It is further determined that specific identification of
the influence of anyone ethnic group is made unlikely as a result of the early absorption of ethnic traditions and the training of one group, Africans and African Americans, in the boat-building and carpentry traditions of the dominant European group.
Extensive additional field data is presented on barge-form craft as remains of this type of vessel contributed to the archaeological record in far greater numbers than any other. The preponderance of this form is interpreted as a manifestation of the magnitude of the South Carolina rice industry and the catastrophic nature of its cessation due to the Civil War of
1860-1865.
Two types of construction are identified, one based on plank and frame (as opposed to plank on frame) methods, the other method utilizing massive chine-girder logs. Evidence is presented to demonstrate that, while the basic barge or flat design was similar throughout the study area, details of construction including chine-girder shaping, fastening methods, scarphing techniques, and bow/stern to side construction methods varied greatly. This is interpreted as a reflection of the individual skills of the plantation carpenters who were primarily responsible for the building of these craft.
Evidence also is presented for an emerging dating technique based on the nature of construction methods, types of fastenings, and the size of lumber components of barge form craft.
The research also suggests predictive models for determining the likelihood of further remains of specific vessel types ranging from rice cuIture flats to phosphate barges.
Finally, appendices to this dissertation include 106 illustrations, a glossary of terms, a procedure for barge documentation, tables of conversions for metric measurements to English measurement on barges, and a discussion of weights and measurements for historic period cargoes and containers
Reproductive performance of resident and migrant males, females and pairs in a partially migratory bird
We thank everyone from the Centre for Ecology & Hydrology (CEH) who contributed to data collection, and Scottish Natural Heritage for access to the Isle of May National Nature Reserve. We thank the Scottish Ornithologists’ Club (SOC) for their support, and all volunteer observers, particularly Raymond Duncan, Moray Souter and Bob Swann. HG was funded by a Natural Environment Research Council (NERC) CASE studentship supported by CEH and SOC, FD, SW, MPH, MN and SB were funded by NERC and the Joint Nature Conservation Committee, and JMR was part-funded by the Royal Society. Finally, we thank the Associate Editor and two reviewers for constructive comments on the manuscript. The data are available from the Dryad Digital Repository https://doi.org/10.5061/dryad.532j0 (Grist et al., 2017)Peer reviewedPublisher PD
Metacognitive Awareness of Facial Affect in Higher-Functioning Children and Adolescents with Autism Spectrum Disorder
Higher-functioning participants with and without autism spectrum disorder (ASD) viewed a series of face stimuli, made decisions regarding the affect of each face, and indicated their confidence in each decision. Confidence significantly predicted accuracy across all participants, but this relation was stronger for participants with typical development than participants with ASD. In the hierarchical linear modeling analysis, there were no differences in face processing accuracy between participants with and without ASD, but participants with ASD were more confident in their decisions. These results suggest that individuals with ASD have metacognitive impairments and are overconfident in face processing. Additionally, greater metacognitive awareness was predictive of better face processing accuracy, suggesting that metacognition may be a pivotal skill to teach in interventions
The Ingram Vessel 38CT204: Intensive Survey & Excavation of an Upland Rivercraft at Cheraw, South Carolina
In 1993 and 1994 the Underwater Archaeology Division of the South Carolina Institute of Archaeology and Anthropology conducted an intensive survey of the remains of a small, wooden hulled craft in the Great Pee Dee River near Cheraw, South Carolina. The project was sponsored in part by the Cheraw Historical Society and partially funded by a grant from the South Carolina Humanities Council. The Ingram Vessel (38CT204), named after its discoverer Miller Ingram, lay overturned and largely buried beneath the river sediments and protected by a large mushroom-shaped rock just upstream of the site. The site was partially excavated and the hull remains mapped in situ. The investigation revealed a shallow draught, keeled vessel, built entirely of Southern Yellow Pine. The site is tentatively dated to the late 18th-early 19th century. Overall dimensions are estimated to have been approximately 15.5m (50ft, l0 in) in length, with a maximum beam of 4.6m (15ft, lin). This report details the research on the site and places the vessel within a regional maritime historical context. The vessel is, to date, the only ship-built hull excavated in an uplands context near the head of navigation of a South Carolina river.https://scholarcommons.sc.edu/archanth_books/1198/thumbnail.jp
Assessing sampling of the fossil record in a geographically and stratigraphically constrained dataset: the Chalk Group of Hampshire, southern UK
Taphonomic, geological and sampling processes have been cited as biasing richness measurements in the fossil record, and sampling proxies have been widely used to assess this. However, the link between sampling and taxonomic richness is poorly understood, and there has been much debate on the equivalence and relevance of proxies. We approach this question by combining both historical and novel data: a historical fossil occurrence dataset with uniquely high spatial resolution from the Upper Cretaceous Chalk Group of Hampshire, UK, and a newly compiled 3D geological model that maps subsurface extent. The geological model provides rock volumes, and these are compared with exposure and outcrop area, sampling proxies that have often been conflated in previous studies. The extent to which exposure area (true rock availability) has changed over research time is also tested. We find a trend of low Cenomanian to high Turonian to Campanian raw richness, which correlates with, and is possibly driven by, the number of specimens found. After sampling standardization, an unexpected mid-Turonian peak diversity is recovered, and sampling-standardized genus richness is best predicted by rock volume, suggesting a species–area (or ‘genus–area’) effect. Additionally, total exposure area has changed over time, but relative exposure remains the same.
Supplementary materials: A locality list, abundance matrix and all correlation and modelling results are available at https://doi.org/10.6084/m9.figshare.c.3592208
Assessing sampling of the fossil record in a geographically and stratigraphically constrained dataset: the Chalk Group of Hampshire, southern UK
Taphonomic, geological and sampling processes have been cited as biasing richness measurements in the fossil record, and sampling proxies have been widely used to assess this. However, the link between sampling and taxonomic richness is poorly understood, and there has been much debate on the equivalence and relevance of proxies. We approach this question by combining both historical and novel data: a historical fossil occurrence dataset with uniquely high spatial resolution from the Upper Cretaceous Chalk Group of Hampshire, UK, and a newly compiled 3D geological model that maps subsurface extent. The geological model provides rock volumes, and these are compared with exposure and outcrop area, sampling proxies that have often been conflated in previous studies. The extent to which exposure area (true rock availability) has changed over research time is also tested. We find a trend of low Cenomanian to high Turonian to Campanian raw richness, which correlates with, and is possibly driven by, the number of specimens found. After sampling standardization, an unexpected mid-Turonian peak diversity is recovered, and sampling-standardized genus richness is best predicted by rock volume, suggesting a species–area (or ‘genus–area’) effect. Additionally, total exposure area has changed over time, but relative exposure remains the same.
Supplementary materials: A locality list, abundance matrix and all correlation and modelling results are available at https://doi.org/10.6084/m9.figshare.c.3592208
Zeros of Rydberg-Rydberg Foster Interactions
Rydberg states of atoms are of great current interest for quantum
manipulation of mesoscopic samples of atoms. Long-range Rydberg-Rydberg
interactions can inhibit multiple excitations of atoms under the appropriate
conditions. These interactions are strongest when resonant collisional
processes give rise to long-range C_3/R^3 interactions. We show in this paper
that even under resonant conditions C_3 often vanishes so that care is required
to realize full dipole blockade in micron-sized atom samples.Comment: 10 pages, 4 figures, submitted to J. Phys.
- …