Structure and dynamics of Oxide Melts and Glasses : a view from multinuclear and high temperature NMR

Solid State Nuclear Magnetic Resonance (NMR) experiments allow characterizing the local structure and dynamics of oxide glasses and melts. Thanks to the development of new experiments, it now becomes possible to evidence not only the details of the coordination state of the network formers of glasses but also to characterize the nature of polyatomic molecular motifs extending over several chemical bonds. We present results involving 31P homonuclear experiments that allow description of groups of up to three phosphate units and 27Al/17O heteronuclear that allows evidencing μ3 oxygen bridges in aluminate glasses and rediscussion of the structure of high temperature melts.Comment: Journal of Non-Crystalline Solids (2007) in press; Also available online at: http://crmht.cnrs-orleans.fr/Intranet/Publications/?id=207

Laser-heated high-temperature NMR - a time-resolution study

International audienc

Damaged beyond repair? Characterising the damage zone of a fault late in its interseismic cycle, the Alpine Fault, New Zealand

X-ray computed tomography (CT) scans of drill-core, recovered from the first phase of the Deep Fault Drilling Project (DFDP-1) through New Zealand\u27s Alpine Fault, provide an excellent opportunity to study the damage zone of a plate-bounding continental scale fault, late in its interseismic cycle. Documentation of the intermediate-macro scale damage zone structures observed in the CT images show that there is no increase in the density of these structures towards the fault\u27s principal slip zones (PSZs), at least within the interval sampled, which is 30 m above and below the PSZs. This is in agreement with independent analysis using borehole televiewer data. Instead, we conclude the density of damage zone structures to correspond to lithology. We find that 72% of fractures are fully healed, by a combination of clays, calcite and quartz, with an additional 24% partially healed. This fracture healing is consistent with the Alpine Fault\u27s late interseismic state, and the fact that the interval of damage zone sampled coincides with an alteration zone, an interval of extensive fluid-rock interaction. These fractures do not impose a reduction of P-wave velocity, as measured by wireline methods. Outside the alteration zone there is indirect evidence of less extensive fracture healing.DFDP-1 was funded by: GNS Science; Victoria University of Wellington; the University of Otago; the University of Auckland; the University of Canterbury; Deutsche Forschungsgemeinschaft and the University of Bremen; Natural Environment Research Council grants NE/J024449/1, NE/G524160/1 and NE/H012486/1 and the University Of Liverpool; and the Marsden Fund of the Royal Society of New Zealand.2018-07-2

Percolation channels: A universal idea to describe the atomic structure and dynamics of glasses and melts

Understanding the links between chemical composition, nano-structure and the dynamic properties of silicate melts and glasses is fundamental to both Earth and Materials Sciences. Central to this is whether the distribution of mobile metallic ions is random or not. In silicate systems, such as window glass, it is well-established that the short-range structure is not random but metal ions cluster, forming percolation channels through a partly broken network of corner-sharing SiO4 tetrahedra. In alumino-silicate glasses and melts, extensively used in industry and representing most of the Earth magmas, metal ions compensate the electrical charge deficit of AlO4 − tetrahedra, but until now clustering has not been confirmed. Here we report how major changes in melt viscosity, together with glass Raman and Nuclear Magnetic Resonance measurements and Molecular Dynamics simulations, demonstrate that metal ions nano-segregate into percolation channels, making this a universal phenomenon of oxide glasses and melts. Furthermore, we can explain how, in both single and mixed alkali compositions, metal ion clustering and percolation radically affect melt mobility, central to understanding industrial and geological processes.CLL thanks support from the ARC Laureate Fellowship FL130100066 to Hugh O’Neill (Research School of Earth Sciences, ANU, Australia) and the Carnegie Postdoctoral Fellowship (Carnegie Institution of Washington, USA) during the redaction of this manuscript

Characterisation of different polymorphs of tris(8-hydroxyquinolinato)aluminium(III) using solid-state NMR and DFT calculations

<p>Abstract</p> <p>Background</p> <p>Organic light emitting devices (OLED) are becoming important and characterisation of them, in terms of structure, charge distribution, and intermolecular interactions, is important. Tris(8-hydroxyquinolinato)-aluminium(III), known as Alq₃, an organomettalic complex has become a reference material of great importance in OLED. It is important to elucidate the structural details of Alq₃in its various isomeric and solvated forms. Solid-state nuclear magnetic resonance (NMR) is a useful tool for this which can also complement the information obtained with X-ray diffraction studies.</p> <p>Results</p> <p>We report here ²⁷Al one-dimensional (1D) and two-dimensional (2D) multiple-quantum magic-angle spinning (MQMAS) NMR studies of the meridional (<it>α</it>-phase) and the facial (<it>δ</it>-phase) isomeric forms of Alq₃. Quadrupolar parameters are estimated from the 1D spectra under MAS and anisotropic slices of the 2D spectra and also calculated using DFT (density functional theory) quantum-chemical calculations. We have also studied solvated phase of Alq₃containing ethanol in its lattice. We show that both the XRD patterns and the quadrupolar parameters of the solvated phase are different from both the <it>α</it>-phase and the <it>δ</it>-phase, although the fluorescence emission shows no substantial difference between the <it>α</it>-phase and the solvated phase. Moreover, we have shown that after the removal of ethanol from the matrix the solvated Alq₃has similar XRD patterns and quadrupolar parameters to that of the <it>α</it>-phase.</p> <p>Conclusion</p> <p>The 2D MQMAS experiments have shown that all the different modifications of Alq₃have ²⁷Al in single unique crystallographic site. The quadrupolar parameters predicted using the DFT calculation under the isodensity polarisable continuum model resemble closely the experimentally obtained values. The solvated phase of Alq₃containing ethanol has structural difference from the <it>α</it>-phase of Alq₃(containing meridional isomer) from the solid-state NMR studies. Solid-state NMR can hence be used as an effective complementary tool to XRD for characterisation and structural elucidation.</p

Structure–properties relationships in fibre drawing of bioactive phosphate glasses

New bioactive phosphate glasses suitable for continuous fibre production are investigated in this work. The structure of both bulk and fibres from Na2O–CaO–MgO–P2O5 glasses has been studied by means of Raman and 31P and 23Na nuclear magnetic resonance spectroscopies, and the structural results have been correlated with the mechanical properties of the fibres and the dissolution rate of the bulk glasses. It has been observed that the mechanical properties of the phosphate glass fibres are influenced by the glass network connectivity, while the dissolution rates are governed by the Qi speciation of the PO4 units. As seen in previous studies, molar volume seems to play an important role in the fragility behaviour of phosphate glasses. Here, a lower molar volume resulting from the increase in the oxygen packing density hinders the cooperative flow of the PO4 units throughout the glass network and, therefore, causes a reduction in the kinetic fragility

Structural and spatially-resolved studies on the hardening of a commercial resin-modified glass-ionomer cement

A commercial photopolymerizable resinmodified glass-ionomer (Fuji II LC) was studied using a variety of nuclear magnetic resonance (NMR) techniques. H and F stray-field imaging (STRAFI) enabled to follow the acid–base reaction kinetics in self-cured (SC) samples. Gelation and maturation processes with 25 min and 40 h average time constants, respectively, were distinguished. In self- & photo-cured (SPC) samples, two processes were also observed, which occurred with 2 s and 47 s average time constants. H, Al and Si magic angle spinning (MAS) NMR, C cross-polarization (CP)/MAS NMR and 27Al multiple quanta (MQ)MAS NMR spectroscopy were used to obtain structural information on the glass and cements that were either SC or SPC. The presence of methacrylate groups was identified in the solid component. Unreacted hydroxyl ethylmethacrylate (HEMA) was detected in self-cured cement. Al data showed that approximately 28% and 20% of Al is leached out from glass particles in SC and SPC samples, respectively. The upfield shift detected in 25Si MAS NMR spectra of the cements is consistent with a decrease in the number of Al species in the second coordination sphere of the silicon structures. Scanning electron microscopy (SEM) showed existence of 3D shrinkage of the cement matrix in photo-cured cements.(undefined