1,090 research outputs found
Seeding of the nematic-isotropic phase transition by an electric field
In this paper, we use a relatively simple continuum model to investigate the effects of dielectric inhomogeneity within confined liquid crystal cells. Specifically, we consider, in planar, cylindrical and spherical geometries, the stability of a nematic-isotropic interface subject to an applied voltage. Depending on the magnitude of this voltage, the temperature and the geometry of the cell, the nematic region may shrink until the material is completely isotropic within the cell, grow until the nematic phase cells the cell or, in certain geometries, coexist with the isotropic phase. For planar geometry, no coexistence is found, but we are able to give analytical expressions for the critical voltage for an electric-field-induced phase transition as well as the critical wetting layer thickness for arbitrary applied voltage. In cells with cylindrical and spherical geometries, however, stable nematic-isotropic coexistence is predicted, the thickness of the nematic region being controllable by alteration of the applied voltage.</p
A safer place for patients: learning to improve patient safety
1 Every day over one million people are treated
successfully by National Health Service (NHS) acute,
ambulance and mental health trusts. However, healthcare
relies on a range of complex interactions of people,
skills, technologies and drugs, and sometimes things do
go wrong. For most countries, patient safety is now the
key issue in healthcare quality and risk management.
The Department of Health (the Department) estimates
that one in ten patients admitted to NHS hospitals will be
unintentionally harmed, a rate similar to other developed
countries. Around 50 per cent of these patient safety
incidentsa could have been avoided, if only lessons from
previous incidents had been learned.
2
There are numerous stakeholders with a role in
keeping patients safe in the NHS, many of whom require
trusts to report details of patient safety incidents and near
misses to them (Figure 2). However, a number of previous
National Audit Office reports have highlighted concerns
that the NHS has limited information on the extent and
impact of clinical and non-clinical incidents and trusts need
to learn from these incidents and share good practice across
the NHS more effectively (Appendix 1).
3 In 2000, the Chief Medical Officer’s report An
organisation with a memory
1
, identified that the key
barriers to reducing the number of patient safety incidents
were an organisational culture that inhibited reporting and
the lack of a cohesive national system for identifying and
sharing lessons learnt.
4 In response, the Department published Building a
safer NHS for patients3 detailing plans and a timetable
for promoting patient safety. The goal was to encourage
improvements in reporting and learning through the
development of a new mandatory national reporting
scheme for patient safety incidents and near misses. Central
to the plan was establishing the National Patient Safety
Agency to improve patient safety by reducing the risk of
harm through error. The National Patient Safety Agency was
expected to: collect and analyse information; assimilate
other safety-related information from a variety of existing
reporting systems; learn lessons and produce solutions.
5 We therefore examined whether the NHS has
been successful in improving the patient safety culture,
encouraging reporting and learning from patient safety
incidents. Key parts of our approach were a census of
267 NHS acute, ambulance and mental health trusts in
Autumn 2004, followed by a re-survey in August 2005
and an omnibus survey of patients (Appendix 2). We also
reviewed practices in other industries (Appendix 3) and
international healthcare systems (Appendix 4), and the
National Patient Safety Agency’s progress in developing its
National Reporting and Learning System (Appendix 5) and
other related activities (Appendix 6).
6 An organisation with a memory1
was an important
milestone in the NHS’s patient safety agenda and marked
the drive to improve reporting and learning. At the
local level the vast majority of trusts have developed a
predominantly open and fair reporting culture but with
pockets of blame and scope to improve their strategies for
sharing good practice. Indeed in our re-survey we found
that local performance had continued to improve with more
trusts reporting having an open and fair reporting culture,
more trusts with open reporting systems and improvements
in perceptions of the levels of under-reporting. At the
national level, progress on developing the national reporting
system for learning has been slower than set out in the
Department’s strategy of 2001
3
and there is a need to
improve evaluation and sharing of lessons and solutions by
all organisations with a stake in patient safety. There is also
no clear system for monitoring that lessons are learned at the
local level. Specifically:
a The safety culture within trusts is improving, driven
largely by the Department’s clinical governance
initiative
4
and the development of more effective risk
management systems in response to incentives under
initiatives such as the NHS Litigation Authority’s
Clinical Negligence Scheme for Trusts (Appendix 7).
However, trusts are still predominantly reactive in
their response to patient safety issues and parts of
some organisations still operate a blame culture.
b All trusts have established effective reporting systems
at the local level, although under-reporting remains
a problem within some groups of staff, types of
incidents and near misses. The National Patient Safety
Agency did not develop and roll out the National
Reporting and Learning System by December 2002
as originally envisaged. All trusts were linked to the
system by 31 December 2004. By August 2005, at
least 35 trusts still had not submitted any data to the
National Reporting and Learning System.
c Most trusts pointed to specific improvements
derived from lessons learnt from their local incident
reporting systems, but these are still not widely
promulgated, either within or between trusts.
The National Patient Safety Agency has provided
only limited feedback to trusts of evidence-based
solutions or actions derived from the national
reporting system. It published its first feedback report
from the Patient Safety Observatory in July 2005
Multistable alignment states in nematic liquid crystal filled wells
Two distinct, stable alignment states have been observed for a nematic liquid crystal confined in a layer with thickness of 12 μm and in square wells with sides of length between 20 and 80 μm. The director lies in the plane of the layer and line defects occur in two corners of the squares. The positions of the defects determine whether the director orientation is across the diagonal or is parallel to two opposite edges of the square. The device is multistable because both the diagonal and parallel states are stable when rotated by multiples of 90° in plane
Adapting research activity: AHRC review of practice-led research
In 2005 the Arts and Humanities Research Council initiated a review of practice-led research in art, design and architecture. The purpose of the review was to develop a ‘comprehensive map of recent and current research activity in the area’. What quickly became obvious to the team that won the bid to run the review (led by the three authors) was that to map activity one first had to attempt to define it. The term ‘practice-led research’ means many different things to different people and so immediately raises debate. The positions range from those who believe that the act of making or designing alone constitutes research, to those who believe that research (as analytical activity) is incommensurable with design (as synthetic activity). For the former, the knowledge contained within the artefact is self-evident and beyond the need for additional explication; for the latter, knowledge resides outside the artefact and in the realm of its dissemination and interpretation. The importance of the AHRC review is not that it will settle these arguments, but that it will provide a much firmer context in which to place them
ALMA CO J=6-5 observations of IRAS16293-2422: Shocks and entrainment
Observations of higher-excited transitions of abundant molecules such as CO
are important for determining where energy in the form of shocks is fed back
into the parental envelope of forming stars. The nearby prototypical and
protobinary low-mass hot core, IRAS16293-2422 (I16293) is ideal for such a
study. The source was targeted with ALMA for science verification purposes in
band 9, which includes CO J=6-5 (E_up/k_B ~ 116 K), at an unprecedented spatial
resolution (~0.2", 25 AU). I16293 itself is composed of two sources, A and B,
with a projected distance of 5". CO J=6-5 emission is detected throughout the
region, particularly in small, arcsecond-sized hotspots, where the outflow
interacts with the envelope. The observations only recover a fraction of the
emission in the line wings when compared to data from single-dish telescopes,
with a higher fraction of emission recovered at higher velocities. The very
high angular resolution of these new data reveal that a bow shock from source A
coincides, in the plane of the sky, with the position of source B. Source B, on
the other hand, does not show current outflow activity. In this region, outflow
entrainment takes place over large spatial scales, >~ 100 AU, and in small
discrete knots. This unique dataset shows that the combination of a
high-temperature tracer (e.g., CO J=6-5) and very high angular resolution
observations is crucial for interpreting the structure of the warm inner
environment of low-mass protostars.Comment: Accepted for publication in A&A Letter
Effect of elevated temperatures on the mechanical performance of pultruded FRP joints with a Single Ordinary or Blind Bolt
Presented in this paper is a combined experimental and analytical modeling study of the strength of pultruded fiber-reinforced polymer (FRP) single-bolted double-lap joints subjected to tensile loading and elevated temperatures. Dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) are conducted on the polymeric composite material to determine the glass transition temperature and decomposition temperature, respectively. Based on the DMA and TGA results, and to cover glass transition without any material decomposition, the six temperatures selected for the test program are +23+23, +60+60, +100+100, +140+140, +180+180, and +220°C+220°C. Three nominally identical joints are tensioned to failure at each temperature. A total of 36 double-lap joints are tested, comprising 18 joints fabricated with ordinary steel bolting and the other 18 with novel blind bolting. A comparison is made based on load-displacement curves, failure modes, and maximum (ultimate) loads. It is found that both methods of mechanical fastening experience a reduction of 85% in maximum load as the test temperature increases from +23+23 to +220°C+220°C. Three proposed empirical or mechanism-based models for characterizing strength under elevated temperatures are shown to provide good predictions for the maximum loads obtained in the test program
The RMS Survey: Resolving kinematic distance ambiguities towards a sample of compact HII regions using HI absorption
We present high-resolution HI data obtained using the Australia Telescope
Compact Array to resolve the near/far distance ambiguities towards a sample of
compact HII regions from the Red MSX Source (RMS) survey. The high resolution
data are complemented with lower resolution archival HI data extracted from the
Southern and VLA Galactic Plane surveys. We resolve the distance ambiguity for
nearly all of the 105 sources where the continuum was strong enough to allow
analysis of the HI absorption line structure. This represents another step in
the determination of distances to the total RMS sample, which with over 1,000
massive young stellar objects and compact HII regions, is the largest and most
complete sample of its kind. The full sample will allow the distribution of
massive star formation in the Galaxy to be examined.Comment: Accepted by MNRAS. This paper consists of 15 pages and contains 10
figures and 5 table
Classifying the embedded young stellar population in Perseus and Taurus & the LOMASS database
Context. The classification of young stellar objects (YSOs) is typically done
using the infrared spectral slope or bolometric temperature, but either can
result in contamination of samples. More accurate methods to determine the
evolutionary stage of YSOs will improve the reliability of statistics for the
embedded YSO population and provide more robust stage lifetimes. Aims. We aim
to separate the truly embedded YSOs from more evolved sources. Methods. Maps of
HCO+ J=4-3 and C18O J=3-2 were observed with HARP on the James Clerk Maxwell
Telescope (JCMT) for a sample of 56 candidate YSOs in Perseus and Taurus in
order to characterize emission from high (column) density gas. These are
supplemented with archival dust continuum maps observed with SCUBA on the JCMT
and Herschel PACS to compare the morphology of the gas and dust in the
protostellar envelopes. The spatial concentration of HCO+ J=4-3 and 850 micron
dust emission are used to classify the embedded nature of YSOs. Results.
Approximately 30% of Class 0+I sources in Perseus and Taurus are not Stage I,
but are likely to be more evolved Stage II pre-main sequence (PMS) stars with
disks. An additional 16% are confused sources with an uncertain evolutionary
stage. Conclusions. Separating classifications by cloud reveals that a high
percentage of the Class 0+I sources in the Perseus star forming region are
truly embedded Stage I sources (71%), while the Taurus cloud hosts a majority
of evolved PMS stars with disks (68%). The concentration factor method is
useful to correct misidentified embedded YSOs, yielding higher accuracy for YSO
population statistics and Stage timescales. Current estimates (0.54 Myr) may
overpredict the Stage I lifetime on the order of 30%, resulting in timescales
of 0.38 Myr for the embedded phase.Comment: 33 pages, 21 figures, 6 tables, Accepted to be published in A&
- …