A laboratory experimental system for infiltration studies

The investigation of a few hydrological processes under natural conditions can be distorted by their interactions. In this context, a laboratory system that allows a few mechanisms of the infiltration process to be studied univocally is presented. The core component of the system is a physical model consisting of a soil tank with slope angle, γ, adjustable from 1 ° to 15 °. A generator of artificial rainfall can produce rainfall rates up to 50 mm h−1. Surface runoff and deep flow, Qd, are continuously monitored. An overall analysis of three previous investigations performed by the physical system and directed to clarify the infiltration process is also briefly reported. These investigations, that concerned the validation of a local conceptual model for erratic rainfalls, the role of run-on and the effects of sloping soil surfaces, were all carried out by using different configurations of the system. Great slope effects in bare soils were observed. For example, under steady conditions, a ratio Qd(γ = 1°) / Qd(γ = 10°) equal to about 4 was observed in a loam soil. Finally, on the basis of the acquired knowledge, further investigations to be realized with the same basic elements are proposed to derive a conceptual model that describes the soil surface gradient effects

Characteristics of the Underestimation Error of Annual Maximum Rainfall Depth Due to Coarse Temporal Aggregation

This study analyzed all characteristics of the error committed in evaluating annual maximum rainfall depth, Hd, associated with a given duration, d, when data with coarse temporal aggregation, ta, were used. It is well known that when ta = 1 min, this error is practically negligible while coarser temporal aggregations can determine underestimation for a single Hd up to 50% and for the average value of sufficiently numerous series of Hd up to 16.67%. By using a mathematical relation between average underestimation error and the ratio ta/d, each Hd value belonging to a specific series could be corrected through deterministic or stochastic approaches. With a deterministic approach, an average correction was identically applied to all Hd values with the same ta and d while, for a stochastic correction, a thorough knowledge of the statistical characteristics of the underestimation error was required. Accordingly, in this work, rainfall data derived from many stations in central Italy were analyzed and it was assessed that single and average errors, which were both assumed as random variables, followed exponential and normal distributions, respectively. Furthermore, the single underestimation error was also found inversely correlated to the corresponding annual maximum rainfall depth

Monitoring intracellular component pools to identify steady state in mammalian cell perfusion culture

Perfusion cultures of mammalian cells are a well-considered alternative in the process development for new biologic products. Stable operation of the culture should eventually lead to a steady state, positively effecting product quality. Although macroscopic variables such as viable cell density, main metabolite or product concentrations are observed constant, little is known about the extent of steady state on intracellular level. In this study intracellular component pools of CHO cells were monitored at different steady states in perfusion cultures using matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS). A novel single extraction was used to separate metabolite, lipid as well as protein fractions and quantify their constitution according to associated internal standards. Statistical tools were applied to resolve characteristic steady state attributes This approach allowed a comprehensive insight on metabolic as well as protein expression level. Identified features were used to explain differences between the examined states. Gained knowledge can be applied in further process optimization

Exploiting High-Resolution Remote Sensing Soil Moisture to Estimate Irrigation Water Amounts over a Mediterranean Region

Despite irrigation being one of the main sources of anthropogenic water consumption, detailed information about water amounts destined for this purpose are often lacking worldwide. In this study, a methodology which can be used to estimate irrigation amounts over a pilot area in Spain by exploiting remotely sensed soil moisture is proposed. Two high-resolution DISPATCH (DISaggregation based on Physical And Theoretical scale CHange) downscaled soil moisture products have been used: SMAP (Soil Moisture Active Passive) and SMOS (Soil Moisture and Ocean Salinity) at 1 km. The irrigation estimates have been obtained through the SM2RAIN algorithm, in which the evapotranspiration term has been improved to adequately reproduce the crop evapotranspiration over irrigated areas according to the FAO (Food and Agriculture Organization) model. The experiment exploiting the SMAP data at 1 km represents the main work analyzed in this study and covered the period from January 2016 to September 2017. The experiment with the SMOS data at 1 km, for which a longer time series is available, allowed the irrigation estimates to be extended back to 2011. For both of the experiments carried out, the proposed method performed well in reproducing the magnitudes of the irrigation amounts that actually occurred in four of the five pilot irrigation districts. The SMAP experiment, for which a more detailed analysis was performed, also provided satisfactory results in representing the spatial distribution and the timing of the irrigation events. In addition, the investigation into which term of the SM2RAIN algorithm plays the leading role in determining the amount of water entering into the soil highlights the importance of correct representation of the evapotranspiration process

Using Wastewater in Irrigation: The Effects on Infiltration Process in a Clayey Soil

Soil water infiltration is a critical process in the soil water cycle and agricultural practices, especially when wastewater is used for irrigation. Although research has been conducted to evaluate the changes in the physical and chemical characteristics of soils irrigated by treated wastewater, a quantitative analysis of the effects produced on the infiltration process is still lacking. The objective of this study is to address this issue. Field experiments previously conducted on three adjacent field plots characterized by the same clayey soil but subjected to three different irrigation treatments have been used. The three irrigation conditions were: non-irrigated (natural conditions) plot, irrigated plot with treated wastewater for two years, and irrigated plot with treated wastewater for five years. Infiltration measurements performed by the Hood infiltrometer have been used to estimate soil hydraulic properties useful to calibrate a simplified infiltration model widely used under ponding conditions, that were existing during the irrigation stage. Our simulations highlight the relevant effect of wastewater usage as an irrigation source in reducing cumulative infiltration and increasing overland flow as a result of modified hydraulic properties of soils characterized by a lower capacity of water drainage. These outcomes can provide important insights for the optimization of irrigation techniques in arid areas where the use of wastewater is often required due to the chronic shortage of freshwater

The history of rainfall data time-resolution in a wide variety of geographical areas

Collected rainfall records by gauges lead to key forcings in most hydrological studies. Depending on sensor type and recording systems, such data are characterized by different time-resolutions (or temporal aggregations), ta. We present an historical analysis of the time-evolution of ta based on a large database of rain gauge networks operative in many study areas. Globally, ta data were collected for 25,423 rain gauge stations across 32 geographic areas, with larger contributions from Australia, USA, Italy and Spain. For very old networks early recordings were manual with coarse time-resolution, typically daily or sometimes monthly. With a few exceptions, mechanical recordings on paper rolls began in the first half of the 20th century, typically with ta of 1 h or 30 min. Digital registrations started only during the last three decades of the 20th century. This short period limits investigations that require long time-series of sub-daily rainfall data, e.g, analyses of the effects of climate change on short-duration (sub-hourly) heavy rainfall. In addition, in the areas with rainfall data characterized for many years by coarse time-resolutions, annual maximum rainfall depths of short duration can be potentially underestimated and their use would produce errors in the results of successive applications. Currently, only 50% of the stations provide useful data at any time-resolution, that practically means ta = 1 min. However, a significant reduction of these issues can be obtained through the information content of the present database. Finally, we suggest an integration of the database by including additional rain gauge networks to enhance its usefulness particularly in a comparative analysis of the effects of climate change on extreme rainfalls of short duration available in different locations

The Second-Generation Guide Star Catalog: Description and Properties

The GSC-II is an all-sky database of objects derived from the uncompressed DSS that the STScI has created from the Palomar and UK Schmidt survey plates and made available to the community. Like its predecessor (GSC-I), the GSC-II was primarily created to provide guide star information and observation planning support for HST. This version, however, is already employed at some of the ground-based new-technology telescopes such as GEMINI, VLT, and TNG, and will also be used to provide support for the JWST and Gaia space missions as well as LAMOST, one of the major ongoing scientific projects in China. Two catalogs have already been extracted from the GSC-II database and released to the astronomical community. A magnitude-limited (R=18.0) version, GSC2.2, was distributed soon after its production in 2001, while the GSC2.3 release has been available for general access since 2007. The GSC2.3 catalog described in this paper contains astrometry, photometry, and classification for 945,592,683 objects down to the magnitude limit of the plates. Positions are tied to the ICRS; for stellar sources, the all-sky average absolute error per coordinate ranges from 0.2" to 0.28" depending on magnitude. When dealing with extended objects, astrometric errors are 20% worse in the case of galaxies and approximately a factor of 2 worse for blended images. Stellar photometry is determined to 0.13-0.22 mag as a function of magnitude and photographic passbands (B,R,I). Outside of the galactic plane, stellar classification is reliable to at least 90% confidence for magnitudes brighter than R=19.5, and the catalog is complete to R=20.Comment: 52 pages, 33 figures, to be published in AJ August 200

On Infiltration and Infiltration Characteristic Times

In his seminal paper on the solution of the infiltration equation, Philip (1969), https://doi-org.proxy.library.uu.nl/10.1016/b978-1-4831-9936-8.50010-6 proposed a gravity time, tgrav, to estimate practical convergence time and the time domain validity of his infinite time series expansion, TSE, for describing the transient state. The parameter tgrav refers to a point in time where infiltration is dominated equally by capillarity and gravity as derived from the first two (dominant) terms of the TSE. Evidence suggests that applicability of the truncated two-term equation of Philip has a time limit requiring higher-order TSE terms to better describe the infiltration process for times exceeding that limit. Since the conceptual definition of tgrav is valid regardless of the infiltration model used, we opted to reformulate tgrav using the analytic implicit model proposed by Parlange et al. (1982), https://doi-org.proxy.library.uu.nl/10.1097/00010694-198206000-00001 valid for all times and related TSE. Our derived gravity times ensure a given accuracy of the approximations describing transient states, while also providing insight about the times needed to reach steady state. In addition to the roles of soil sorptivity (S) and the saturated (Ks) and initial (Ki) hydraulic conductivities, we explored the effects of a soil specific shape parameter β, involved in Parlange's model and related to the type of soil, on the behavior of tgrav. We show that the reformulated tgrav (notably urn:x-wiley:00431397:media:wrcr26009:wrcr26009-math-0001 where F(β) is a β-dependent function) is about three times larger than the classical tgrav given by urn:x-wiley:00431397:media:wrcr26009:wrcr26009-math-0002. The differences between the classical tgrav,Philip and the reformulated tgrav increase for fine-textured soils, attributed to the time needed to attain steady-state infiltration and thus i + infiltration for inferring soil hydraulic properties. Results show that the proposed tgrav is a better indicator of time domain validity than tgrav,Philip. For the attainment of steady-state infiltration, the reformulated tgrav is suitable for coarse-textured soils. Still neither the reformulated tgrav nor the classical tgrav,Philip are suitable for fine-textured soils for which tgrav is too conservative and tgrav,Philip too short. Using tgrav will improve predictions of the soil hydraulic parameters (particularly Ks) from infiltration data compared to tgrav,Philip

Development and analysis of the Soil Water Infiltration Global database

In this paper, we present and analyze a novel global database of soil infiltration measurements, the Soil Water Infiltration Global (SWIG) database. In total, 5023 infiltration curves were collected across all continents in the SWIG database. These data were either provided and quality checked by the scientists who performed the experiments or they were digitized from published articles. Data from 54 different countries were included in the database with major contributions from Iran, China, and the USA. In addition to its extensive geographical coverage, the collected infiltration curves cover research from 1976 to late 2017. Basic information on measurement location and method, soil properties, and land use was gathered along with the infiltration data, making the database valuable for the development of pedotransfer functions (PTFs) for estimating soil hydraulic properties, for the evaluation of infiltration measurement methods, and for developing and validating infiltration models. Soil textural information (clay, silt, and sand content) is available for 3842 out of 5023 infiltration measurements ( ∼ 76%) covering nearly all soil USDA textural classes except for the sandy clay and silt classes. Information on land use is available for 76% of the experimental sites with agricultural land use as the dominant type ( ∼ 40%). We are convinced that the SWIG database will allow for a better parameterization of the infiltration process in land surface models and for testing infiltration models. All collected data and related soil characteristics are provided online in *.xlsx and *.csv formats for reference, and we add a disclaimer that the database is for public domain use only and can be copied freely by referencing it. Supplementary data are available at https://doi.org/10.1594/PANGAEA.885492 (Rahmati et al., 2018). Data quality assessment is strongly advised prior to any use of this database. Finally, we would like to encourage scientists to extend and update the SWIG database by uploading new data to it