Temperature-assisted formation of reversible metallophilic Au-Ag interaction arrays

A temperature-controlled self-assembly process in a solution of [Ag(terpy)] n n+ and [Au(C 6 F 5 ) 2 ] - units has been performed. For this, the crystallisation of the complex [{Au(C 6 F 5 ) 2 }Ag(terpy)] n under the same experimental conditions, changing only the temperature, allows the synthesis of polymorphs [{Au(C 6 F 5 ) 2 } 2 Ag 2 (terpy) 2 ] n (2a) at 298 K and [{Au(C 6 F 5 ) 2 }Ag(terpy)] n (2b) at 280 K. The X-ray diffraction studies previously reported for 2a revealed a polymeric structure with an unusual + + - - + + - - charge sequence, whereas for polymorph 2b, a more classical + - + - disposition has been obtained. The conversion of one polymorph into the other can be achieved by simple dissolution of one of them and by recrystallisation at the corresponding temperature. The mechanism of the formation of each polymorph is proposed in view of their 1 H NMR, 1 H-PGSE NMR and molar conductivity measurements

Grain Surface Models and Data for Astrochemistry

AbstractThe cross-disciplinary field of astrochemistry exists to understand the formation, destruction, and survival of molecules in astrophysical environments. Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. A broad consensus has been reached in the astrochemistry community on how to suitably treat gas-phase processes in models, and also on how to present the necessary reaction data in databases; however, no such consensus has yet been reached for grain-surface processes. A team of ∼25 experts covering observational, laboratory and theoretical (astro)chemistry met in summer of 2014 at the Lorentz Center in Leiden with the aim to provide solutions for this problem and to review the current state-of-the-art of grain surface models, both in terms of technical implementation into models as well as the most up-to-date information available from experiments and chemical computations. This review builds on the results of this workshop and gives an outlook for future directions

Study of Tau-pair Production in Photon-Photon Collisions at LEP and Limits on the Anomalous Electromagnetic Moments of the Tau Lepton

Tau-pair production in the process e+e- -> e+e-tau+tau- was studied using data collected by the DELPHI experiment at LEP2 during the years 1997 - 2000. The corresponding integrated luminosity is 650 pb^{-1}. The values of the cross-section obtained are found to be in agreement with QED predictions. Limits on the anomalous magnetic and electric dipole moments of the tau lepton are deduced.Comment: 20 pages, 9 figures, Accepted by Eur. Phys. J.

Evidence for an Excess of Soft Photons in Hadronic Decays of Z^0

Soft photons inside hadronic jets converted in front of the DELPHI main tracker (TPC) in events of qqbar disintegrations of the Z^0 were studied in the kinematic range 0.2 < E_gamma < 1 GeV and transverse momentum with respect to the closest jet direction p_T < 80 MeV/c. A clear excess of photons in the experimental data as compared to the Monte Carlo predictions is observed. This excess (uncorrected for the photon detection efficiency) is (1.17 +/- 0.06 +/- 0.27) x 10^{-3} gamma/jet in the specified kinematic region, while the expected level of the inner hadronic bremsstrahlung (which is not included in the Monte Carlo) is (0.340 +/- 0.001 +/- 0.038) x 10^{-3} gamma/jet. The ratio of the excess to the predicted bremsstrahlung rate is then (3.4 +/- 0.2 +/- 0.8), which is similar in strength to the anomalous soft photon signal observed in fixed target experiments with hadronic beams.Comment: 37 pages, 9 figures, Accepted by Eur. Phys. J.

Study of Inclusive J/psi Production in Two-Photon Collisions at LEP II with the DELPHI Detector

Inclusive J/psi production in photon-photon collisions has been observed at LEP II beam energies. A clear signal from the reaction gamma gamma -> J/psi+X is seen. The number of observed N(J/psi -> mu+mu-) events is 36 +/- 7 for an integrated luminosity of 617 pb^{-1}, yielding a cross-section of sigma(J/psi+X) = 45 +/- 9 (stat) +/- 17 (syst) pb. Based on a study of the event shapes of different types of gamma gamma processes in the PYTHIA program, we conclude that (74 +/- 22)% of the observed J/psi events are due to `resolved' photons, the dominant contribution of which is most probably due to the gluon content of the photon.Comment: 13 pages, 8 figures, Accepted by Phys. Lett.

CP asymmetry in B→ϕKSB \to \phi K_S in a general two-Higgs-doublet model with fourth-generation quarks

We discuss the time-dependent CP asymmetry of decay $B \to \phi K_S$ in an extension of the Standard Model with both two Higgs doublets and additional fourth-generation quarks. We show that although the Standard Model with two-Higgs-doublet and the Standard model with fourth generation quarks alone are not likely to largely change the effective $\sin 2 \beta$ from the decay of $B \to \phi K_S$, the model with both additional Higgs doublet and fourth-generation quarks can easily account for the possible large negative value of $\sin 2 \beta$ without conflicting with other experimental constraints. In this model, additional large CP violating effects may arise from the flavor changing Yukawa interactions between neutral Higgs bosons and the heavy fourth generation down type quark, which can modify the QCD penguin contributions. With the constraints obtained from $b \to s \bar{s} s$ processes such as $B \to X_s \gamma$ and $\Delta m_{B_s^0}$, this model can lead to the effective $\sin 2 \beta$ to be as large as $- 0.4$ in the CP asymmetry of $B \to \phi K_S$.Comment: 13 pages, 5 figures, references added, to appear in Eur.Phys.J.

Energy dependence of Cronin momentum in saturation model for p+Ap+A and A+AA+A collisions

We calculate $\sqrt{s}$ dependence of Cronin momentum for $p+A$ and $A+A$ collisions in saturation model. We show that this dependence is consistent with expectation from formula which was obtained using simple dimentional consideration. This can be used to test validity of saturation model (and distinguish among its variants) and measure $x$ dependence of saturation momentum from experimental data.Comment: LaTeX2e, 12 pages, 8 figure

A Precise Measurement of the Tau Lifetime

The tau lepton lifetime has been measured with the e+e- -> tau+tau- events collected by the DELPHI detector at LEP in the years 1991-1995. Three different methods have been exploited, using both one-prong and three-prong tau decay channels. Two measurements have been made using events in which both taus decay to a single charged particle. Combining these measurements gave tau_tau (1 prong) = 291.8 +/- 2.3 (stat) +/- 1.5 (sys) fs. A third measurement using taus which decayed to three charged particles yielded tau_tau (3 prong) = 288.6 +/- 2.4 (stat) +/- 1.3 (sys) fs. These were combined with previous DELPHI results to measure the tau lifetime, using the full LEP1 data sample, to be tau_tau = 290.9 +/- 1.4 (stat) +/- 1.0 (sys) fs.Comment: 27 pages, 7 figure

Search for composite and exotic fermions at LEP 2

A search for unstable heavy fermions with the DELPHI detector at LEP is reported. Sequential and non-canonical leptons, as well as excited leptons and quarks, are considered. The data analysed correspond to an integrated luminosity of about 48 pb^{-1} at an e^+e^- centre-of-mass energy of 183 GeV and about 20 pb^{-1} equally shared between the centre-of-mass energies of 172 GeV and 161 GeV. The search for pair-produced new leptons establishes 95% confidence level mass limits in the region between 70 GeV/c^2 and 90 GeV/c^2, depending on the channel. The search for singly produced excited leptons and quarks establishes upper limits on the ratio of the coupling of the excited fermio

A Review of Fiber-Reinforced Injection Molding: Flow Kinematics and Particle Orientation

The existing flow and particle orientation models applicable to fiber- reinforced injection molding are reviewed. After a brief description of injection molding, previous studies on the flow kinematics and fiber reinforcement are presented. Basics of Hele-Shaw flows are described Including the commonly used viscosity models and foun tain flow effects. Some of the existing models for particle orientation are analyzed with particular emphasis on the amsotropic description of the material system. Concentration regions for short fiber suspensions are defined and relevant constitutive equations are dis cussed. A few example solutions are also given which describe the three-dimensional ori entation field for the filling of a sudden expansion cavity, depicting skin-core orientation structure.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline