5-azido-2-aminopyridine, A New Nitrene/nitrenium Ion Photoaffinity Labeling Agent That Exhibits Reversible Intersystem Crossing Between Singlet And Triplet Nitrenes

The photochemistry of a new photoaffinity labeling (PAL) agent, 5-azido-2-(N,N-diethylamino)pyridine, was studied in aprotic and protic solvents using femtosecond-to-microsecond transient absorption and product analysis, in conjunction with ab initio multiconfigurational and multireference quantum chemical calculations. The excited singlet SI state is spectroscopically dark, whereas photoexcitation to higher-lying singlet excited S-2 and S-3 states drives the photochemical reaction toward a barrierless ultrafast relaxation path via two conical intersections to S-1, where N-2 elimination leads to the formation of the closed-shell singlet nitrene. The singlet nitrene undergoes intersystem crossing (ISC) to the triplet nitrene in aprotic and protic solvents as well as protonation to form the nitrenium ion. The ISC rate constants in aprotic solvents increase with solvent polarity, displaying a direct gap effect, whereas an inverse gap effect is observed in protic solvents. Transient absorption actinometry experiments suggest that a solvent-dependent fraction from 20% to 50% of nitrenium ions is generated on a time scale of a few tens of picoseconds. The closed-shell singlet and triplet nitrene are separated by a small energy gap in protic solvents. As a result, the unreactive triplet state nitrene undergoes delayed, thermally activated reverse ISC to reform the reactive closed-shell singlet nitrene, which subsequently protonates, forming the remaining fraction of nitrenium ions. The product studies demonstrate that the resulting nitrenium ion stabilized by the electron-donating 4-amino group yields the final cross-linked product with high, almost quantitative efficiency. The enhanced PAL function of this new azide with respect to the widely applied 4-amino-3-nitrophenyl azide is discussed

The Effect Of The Charge-separating Interface On Exciton Dynamics In Photocatalytic Colloidal Heteronanocrystals

Ultrafast transient absorption spectroscopy was used to investigate the nature of photoinduced charge transfer processes taking place in ZnSe/CdS/Pt colloidal heteronanocrystals. These nanoparticles consist of a dot-in-a-rod semiconductor domain (ZnSe/CdS) coupled to a Pt tip. Together the three components are designed to dissociate an electron-hole pair by pinning the hole in the ZnSe domain while allowing the electron to transfer into the Pt tip. Separated charges can then induce a catalytic reaction, such as the light-driven hydrogen production. Present measurements demonstrate that the internal electron-hole separation is fast and results in the localization of both charges in nonadjacent parts of the nanoparticle. In particular, we show that photoinduced holes become confined within the ZnSe domain in less than 2 ps, while electrons take approximately 15 ps to transition into a Pt tip. More importantly, we demonstrate that the presence of the ZnSe dot within the CdS nanorods plays a key role both in enabling photoinduced separation of charges and in suppressing their backward recombination. The implications of the observed exciton dynamics to photocatalytic function of ZnSe/CdS/Pt heteronanocrystals are discussed

Combinatorics of BB-orbits and Bruhat--Chevalley order on involutions

Let $B$ be the group of invertible upper-triangular complex $n\times n$ matrices, $\mathfrak{u}$ the space of upper-triangular complex matrices with zeroes on the diagonal and $\mathfrak{u}^*$ its dual space. The group $B$ acts on $\mathfrak{u}^*$ by $(g.f)(x)=f(gxg^{-1})$, $g\in B$, $f\in\mathfrak{u}^*$, $x\in\mathfrak{u}$. To each involution $\sigma$ in $S_n$, the symmetric group on $n$ letters, one can assign the $B$-orbit $\Omega_{\sigma}\in\mathfrak{u}^*$. We present a combinatorial description of the partial order on the set of involutions induced by the orbit closures. The answer is given in terms of rook placements and is dual to A. Melnikov's results on $B$-orbits on $\mathfrak{u}$. Using results of F. Incitti, we also prove that this partial order coincides with the restriction of the Bruhat--Chevalley order to the set of involutions.Comment: 27 page

A Comparative Study of Modern Homology Modeling Algorithms for Rhodopsin Structure Prediction

Rhodopsins are seven α-helical membrane proteins that are of great importance in chemistry, biology, and modern biotechnology. Any in silico study on rhodopsin properties and functioning requires a high-quality three-dimensional structure. Due to particular difficulties with obtaining membrane protein structures from the experiment, in silico prediction of the three-dimensional rhodopsin structure based only on its primary sequence is an especially important task. For the last few years, significant progress was made in the field of protein structure prediction, especially for methods based on comparative modeling. However, the majority of this progress was made for soluble proteins and further investigations are needed to achieve similar progress for membrane proteins. In this paper, we evaluate the performance of modern protein structure prediction methodologies (implemented in the Medeller, I-TASSER, and Rosetta packages) for their ability to predict rhodopsin structures. Three widely used methodologies were considered: two general methodologies that are commonly applied to soluble proteins and a methodology that uses constraints that are specific for membrane proteins. The test pool consisted of 36 target-template pairs with different sequence similarities that was constructed on the basis of 24 experimental rhodopsin structures taken from the RCSB database. As a result, we showed that all three considered methodologies allow obtaining rhodopsin structures with the quality that is close to the crystallographic one (root mean square deviation (RMSD) of the predicted structure from the corresponding X-ray structure up to 1.5 Å) if the target-template sequence identity is higher than 40%. Moreover, all considered methodologies provided structures of average quality (RMSD < 4.0 Å) if the target-template sequence identity is higher than 20%. Such structures can be subsequently used for further investigation of molecular mechanisms of protein functioning and for the development of modern protein-based biotechnologies

Pro-apoptotic and antiproliferative activity of human KCNRG, a putative tumor suppressor in 13q14 region

Deletion of 13q14.3 and a candidate gene KCNRG (potassium channel regulating gene) is the most frequent chromosomal abnormality in B-cell chronic lymphocytic leukemia and is a common finding in multiple myeloma (MM). KCNRG protein may interfere with the normal assembly of the K+ channel proteins causing the suppression of Kv currents. We aimed to examine possible role of KCNRG haploinsufficiency in chronic lymphocytic leukemia (CLL) and MM cells. We performed detailed genomic analysis of the KCNRG locus; studied effects of the stable overexpression of KCNRG isoforms in RPMI-8226, HL-60, and LnCaP cells; and evaluated relative expression of its transcripts in various human lymphomas. Three MM cell lines and 35 CLL PBL samples were screened for KCNRG mutations. KCNRG exerts growth suppressive and pro-apoptotic effects in HL-60, LnCaP, and RPMI-8226 cells. Direct sequencing of KCNRG exons revealed point mutation delT in RPMI-8226 cell line. Levels of major isoform of KCNRG mRNA are lower in DLBL lymphomas compared to normal PBL samples, while levels of its minor mRNA are decreased across the broad range of the lymphoma types. The haploinsufficiency of KCNRG might be relevant to the progression of CLL and MM at least in a subset of patients

Recommended reading list of early publications on atomic layer deposition-Outcome of the "Virtual Project on the History of ALD"

Atomic layer deposition (ALD), a gas-phase thin film deposition technique based on repeated, self-terminating gas-solid reactions, has become the method of choice in semiconductor manufacturing and many other technological areas for depositing thin conformal inorganic material layers for various applications. ALD has been discovered and developed independently, at least twice, under different names: atomic layer epitaxy (ALE) and molecular layering. ALE, dating back to 1974 in Finland, has been commonly known as the origin of ALD, while work done since the 1960s in the Soviet Union under the name "molecular layering" (and sometimes other names) has remained much less known. The virtual project on the history of ALD (VPHA) is a volunteer-based effort with open participation, set up to make the early days of ALD more transparent. In VPHA, started in July 2013, the target is to list, read and comment on all early ALD academic and patent literature up to 1986. VPHA has resulted in two essays and several presentations at international conferences. This paper, based on a poster presentation at the 16th International Conference on Atomic Layer Deposition in Dublin, Ireland, 2016, presents a recommended reading list of early ALD publications, created collectively by the VPHA participants through voting. The list contains 22 publications from Finland, Japan, Soviet Union, United Kingdom, and United States. Up to now, a balanced overview regarding the early history of ALD has been missing; the current list is an attempt to remedy this deficiency. (C) 2016 Author(s).Peer reviewe

Improved functionalization of oleic acid-coated iron oxide nanoparticles for biomedical applications

Superparamagnetic iron oxide nanoparticles can providemultiple benefits for biomedical applications in aqueous environments such asmagnetic separation or magnetic resonance imaging. To increase the colloidal stability and allow subsequent reactions, the introduction of hydrophilic functional groups onto the particles’ surface is essential. During this process, the original coating is exchanged by preferably covalently bonded ligands such as trialkoxysilanes. The duration of the silane exchange reaction, which commonly takes more than 24 h, is an important drawback for this approach. In this paper, we present a novel method, which introduces ultrasonication as an energy source to dramatically accelerate this process, resulting in high-quality waterdispersible nanoparticles around 10 nmin size. To prove the generic character, different functional groups were introduced on the surface including polyethylene glycol chains, carboxylic acid, amine, and thiol groups. Their colloidal stability in various aqueous buffer solutions as well as human plasma and serum was investigated to allow implementation in biomedical and sensing applications.status: publishe

Strategic trading in informationally complex environments

We study trading behavior and the properties of prices in informationally complex markets. Our model is based on the single-period version of the linear-normal framework of Kyle (1985). We allow for essentially arbitrary correlations among the random variables involved in the model: the value of the traded asset, the signals of strategic traders and competitive market makers, and the demand from liquidity traders. We show that there always exists a unique linear equilibrium, characterize it analytically, and illustrate its properties in a series of examples. We then use this characterization to study the informational efficiency of prices as the number of strategic traders becomes large. If liquidity demand is positively correlated (or uncorrelated) with the asset value, then prices in large markets aggregate all available information. If liquidity demand is negatively correlated with the asset value, then prices in large markets aggregate all information except that contained in liquidity demand

Copper&ndash;Ruthenium Composite as Perspective Material for Bioelectrodes: Laser-Assisted Synthesis, Biocompatibility Study, and an Impedance-Based Cellular Biosensor as Proof of Concept

Copper is an inexpensive material that has found wide application in electronics due to its remarkable electric properties. However, the high toxicity of both copper and copper oxide imposes restrictions on the application of this metal as a material for bioelectronics. One way to increase the biocompatibility of pure copper while keeping its remarkable properties is to use copper-based composites. In the present study, we explored a new copper&ndash;ruthenium composite as a potential biocompatible material for bioelectrodes. Sample electrodes were obtained by subsequent laser deposition of copper and ruthenium on glass plates from a solution containing salts of these metals. The fabricated Cu&ndash;Ru electrodes exhibit high effective area and their impedance properties can be described by simple R-CPE equivalent circuits that make them perspective for sensing applications. Finally, we designed a simple impedance cell-based biosensor using this material that allows us to distinguish between dead and alive HeLa cells