Determination of micro-scale plastic strain caused by orthogonal cutting

An electron beam lithography technique has been used to produce microgrids in order to measure local plastic strains, induced during an orthogonal cutting process, at the microscopic scale in the shear zone and under the machined surface. Microgrids with a 10 μm pitch and a line width less than 1 μm have been printed on the polished surface of an aluminium alloy AA 5182 to test the applicability of the technique in metal cutting operations. Orthogonal cutting tests were carried out at 40 mm/s. Results show that the distortion of the grids could successfully be used to compute plastic strains due to orthogonal cutting with higher accuracy compared to other techniques reported in the literature. Strain maps of the machined specimens have been produced and show high-strain gradients very close to the machined surface with local values reaching 2.2. High-resolution strain measurements carried out in the primary deformation zone also provide new insight into the material deformation during the chip formation process

Review and assessment of latent and sensible heat flux accuracy over the global oceans

For over a decade, several research groups have been developing air-sea heat flux information over the global ocean, including latent (LHF) and sensible (SHF) heat fluxes over the global ocean. This paper aims to provide new insight into the quality and error characteristics of turbulent heat flux estimates at various spatial and temporal scales (from daily upwards). The study is performed within the European Space Agency (ESA) Ocean Heat Flux (OHF) project. One of the main objectives of the OHF project is to meet the recommendations and requirements expressed by various international programs such as the World Research Climate Program (WCRP) and Climate and Ocean Variability, Predictability, and Change (CLIVAR), recognizing the need for better characterization of existing flux errors with respect to the input bulk variables (e.g. surface wind, air and sea surface temperatures, air and surface specific humidities), and to the atmospheric and oceanic conditions (e.g. wind conditions and sea state). The analysis is based on the use of daily averaged LHF and SHF and the asso- ciated bulk variables derived from major satellite-based and atmospheric reanalysis products. Inter-comparisons of heat flux products indicate that all of them exhibit similar space and time patterns. However, they also reveal significant differences in magnitude in some specific regions such as the western ocean boundaries during the Northern Hemisphere winter season, and the high southern latitudes. The differences tend to be closely related to large differences in surface wind speed and/or specific air humidity (for LHF) and to air and sea temperature differences (for SHF). Further quality investigations are performed through comprehensive comparisons with daily-averaged LHF and SHF estimated from moorings. The resulting statistics are used to assess the error of each OHF product. Consideration of error correlation between products and observations (e.g., by their assimilation) is also given. This reveals generally high noise variance in all products and a weak signal in common with in situ observations, with some products only slightly better than others. The OHF LHF and SHF products, and their associated error characteristics, are used to compute daily OHF multiproduct-ensemble (OHF/MPE) estimates of LHF and SHF over the ice-free global ocean on a 0.25° × 0.25° grid. The accuracy of this heat multiproduct, determined from comparisons with mooring data, is greater than for any individual product. It is used as a reference for the anomaly characterization of each individual OHF product

Health effects of airborne exposures from concentrated animal feedings operations

Toxic gases, vapors, and particles are emitted from concentrated animal feeding operations (CAFOs) into the general environment. These include ammonia, hydrogen sulfide, carbon dioxide, malodorous vapors, and particles contaminated with a wide range of microorganisms. Little is known about the health risks of exposure to these agents for people living in the surrounding areas. Malodor is one of the predominant concerns, and there is evidence that psychophysiologic changes may occur as a result of exposure to malodorous compounds. There is a paucity of data regarding community adverse health effects related to low-level gas and particulate emissions. Most information comes from studies among workers in CAFO installations. Research over the last decades has shown that microbial exposures, especially endotoxin exposure, are related to deleterious respiratory health effects, of which cross-shift lung function decline and accelerated decline over time are the most pronounced effects. Studies in naïve subjects and workers have shown respiratory inflammatory responses related to the microbial load. This working group, which was part of the Conference on Environmental Health Impacts of Concentrated Animal Feeding Operations: Anticipating Hazards—Searching for Solutions, concluded that there is a great need to evaluate health effects from exposures to the toxic gases, vapors, and particles emitted into the general environment by CAFOs. Research should focus not only on nuisance and odors but also on potential health effects from microbial exposures, concentrating on susceptible subgroups, especially asthmatic children and the elderly, since these exposures have been shown to be related to respiratory health effects among workers in CAFOs

Health effects of airborne exposures from concentrated animal feedings operations

Toxic gases, vapors, and particles are emitted from concentrated animal feeding operations (CAFOs) into the general environment. These include ammonia, hydrogen sulfide, carbon dioxide, malodorous vapors, and particles contaminated with a wide range of microorganisms. Little is known about the health risks of exposure to these agents for people living in the surrounding areas. Malodor is one of the predominant concerns, and there is evidence that psychophysiologic changes may occur as a result of exposure to malodorous compounds. There is a paucity of data regarding community adverse health effects related to low-level gas and particulate emissions. Most information comes from studies among workers in CAFO installations. Research over the last decades has shown that microbial exposures, especially endotoxin exposure, are related to deleterious respiratory health effects, of which cross-shift lung function decline and accelerated decline over time are the most pronounced effects. Studies in naïve subjects and workers have shown respiratory inflammatory responses related to the microbial load. This working group, which was part of the Conference on Environmental Health Impacts of Concentrated Animal Feeding Operations: Anticipating Hazards—Searching for Solutions, concluded that there is a great need to evaluate health effects from exposures to the toxic gases, vapors, and particles emitted into the general environment by CAFOs. Research should focus not only on nuisance and odors but also on potential health effects from microbial exposures, concentrating on susceptible subgroups, especially asthmatic children and the elderly, since these exposures have been shown to be related to respiratory health effects among workers in CAFOs