122 research outputs found

    Elevated serum ceruloplasmin levels are associated with higher impulsivity in people with Parkinson’s Disease

    Get PDF
    Background. Heightened impulsivity has been reported in a subset of people with Parkinson’s disease (PwP) and is considered a risk factor for the development of impulse control disorders (ICDs). However, at present, there are no recognised biochemical markers of heightened impulsivity. Objectives. To determine if ceruloplasmin, a serum marker involved in the regulation of iron and copper homeostasis, is associated with trait impulsivity in PwP. Methods. The study measured serum ceruloplasmin and impulsivity using the Barratt Impulsiveness Scale (BIS-11) in an Australian cohort of 214 PwP. Multivariate general linear models (GLMs) were used to identify whether higher serum ceruloplasmin levels (>75th percentile) were significantly predictive of BIS-11 scores. Results. Serum ceruloplasmin was higher in females with PD (p<0.001) and associated with MDS-UPDRS III, Hoehn and Yahr, and ACE-R scores (p<0.05). When correcting for covariates, higher serum ceruloplasmin concentrations were associated with the 2nd order nonplanning impulsivity and with the 1st order self-control and cognitive complexity impulsivity domains. Conclusions. Higher serum ceruloplasmin levels are independently associated with heightened nonplanning impulsivity in PwP. Thus, serum ceruloplasmin levels may have clinical utility as a marker for heightened impulsivity in PD

    Effect of Weld Schedule on the Residual Stress Distribution of Boron Steel Spot Welds

    Get PDF
    Press-hardened boron steel has been utilized in anti-intrusion systems in automobiles, providing high strength and weight-saving potential through gage reduction. Boron steel spot welds exhibit a soft heat-affected zone which is surrounded by a hard nugget and outlying base material. This soft zone reduces the strength of the weld and makes it susceptible to failure. Additionally, different welding regimes lead to significantly different hardness distributions, making failure prediction difficult. Boron steel sheets, welded with fixed and adaptive schedules, were characterized. These are the first experimentally determined residual stress distributions for boron steel resistance spot welds which have been reported. Residual strains were measured using neutron diffraction, and the hardness distributions were measured on the same welds. Additionally, similar measurements were performed on spot welded DP600 steel as a reference material. A correspondence between residual stress and hardness profiles was observed for all welds. A significant difference in material properties was observed between the fixed schedule and adaptively welded boron steel samples, which could potentially lead to a difference in failure loads between the two boron steel welds

    Measurement of the Bs0J/ψKS0B_s^0\to J/\psi K_S^0 branching fraction

    Get PDF
    The Bs0J/ψKS0B_s^0\to J/\psi K_S^0 branching fraction is measured in a data sample corresponding to 0.41fb1fb^{-1} of integrated luminosity collected with the LHCb detector at the LHC. This channel is sensitive to the penguin contributions affecting the sin2β\beta measurement from B0J/ψKS0B^0\to J/\psi K_S^0 The time-integrated branching fraction is measured to be BF(Bs0J/ψKS0)=(1.83±0.28)×105BF(B_s^0\to J/\psi K_S^0)=(1.83\pm0.28)\times10^{-5}. This is the most precise measurement to date

    Measurement of the CP-violating phase \phi s in Bs->J/\psi\pi+\pi- decays

    Get PDF
    Measurement of the mixing-induced CP-violating phase phi_s in Bs decays is of prime importance in probing new physics. Here 7421 +/- 105 signal events from the dominantly CP-odd final state J/\psi pi+ pi- are selected in 1/fb of pp collision data collected at sqrt{s} = 7 TeV with the LHCb detector. A time-dependent fit to the data yields a value of phi_s=-0.019^{+0.173+0.004}_{-0.174-0.003} rad, consistent with the Standard Model expectation. No evidence of direct CP violation is found.Comment: 15 pages, 10 figures; minor revisions on May 23, 201

    Measurement of the ratio of branching fractions BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma) and the direct CP asymmetry in B0 -> K*0 gamma

    Get PDF
    The ratio of branching fractions of the radiative B decays B0 -> K*0 gamma and Bs0 phi gamma has been measured using an integrated luminosity of 1.0 fb-1 of pp collision data collected by the LHCb experiment at a centre-of-mass energy of sqrt(s)=7 TeV. The value obtained is BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma) = 1.23 +/- 0.06(stat.) +/- 0.04(syst.) +/- 0.10(fs/fd), where the first uncertainty is statistical, the second is the experimental systematic uncertainty and the third is associated with the ratio of fragmentation fractions fs/fd. Using the world average value for BR(B0 -> K*0 gamma), the branching fraction BR(Bs0 -> phi gamma) is measured to be (3.5 +/- 0.4) x 10^{-5}. The direct CP asymmetry in B0 -> K*0 gamma decays has also been measured with the same data and found to be A(CP)(B0 -> K*0 gamma) = (0.8 +/- 1.7(stat.) +/- 0.9(syst.))%. Both measurements are the most precise to date and are in agreement with the previous experimental results and theoretical expectations.Comment: 21 pages, 3 figues, 4 table

    First observation of the decay Bˉs0D0K0\bar{B}^0_s \to D^0 K^{*0} and a measurement of the ratio of branching fractions B(Bˉs0D0K0)B(Bˉ0D0ρ0)\frac{{\cal B}(\bar{B}^0_s \to D^0 K^{*0})}{{\cal B}(\bar{B}^0 \to D^0 \rho^0)}

    Get PDF
    The first observation of the decay Bˉs0D0K0\bar{B}^0_s \to D^0 K^{*0} using pppp data collected by the LHCb detector at a centre-of-mass energy of 7 TeV, corresponding to an integrated luminosity of 36 pb1^{-1}, is reported. A signal of 34.4±6.834.4 \pm 6.8 events is obtained and the absence of signal is rejected with a statistical significance of more than nine standard deviations. The Bˉs0D0K0\bar{B}^0_s \to D^0 K^{*0} branching fraction is measured relative to that of Bˉ0D0ρ0\bar{B}^0 \to D^0 \rho^0: B(Bˉs0D0K0)B(Bˉ0D0ρ0)=1.48±0.34±0.15±0.12\frac{{\cal B}(\bar{B}^0_s \to D^0 K^{*0})}{{\cal B}(\bar{B}^0 \to D^0 \rho^0)} = 1.48 \pm 0.34 \pm 0.15 \pm 0.12, where the first uncertainty is statistical, the second systematic and the third is due to the uncertainty on the ratio of the B0B^0 and Bs0B^0_s hadronisation fractions.Comment: 10 pages, 3 figures, submitted to Phys. Lett. B; ISSN 0370-269

    Youth futures and a masculine development ethos in the regional story of Uttarakhand

    Get PDF
    Research on the Uttarakhand region, which became a new state in 2000, has focused largely on agrarian livelihoods, religious rituals, development demands, ecological politics and the role of women in regional social movements. This essay discusses another dimension of the regional imaginary—that of a masculine development ethos. Based on ethnographic research and print media sources, this essay focuses on stories, politics, mobilities and imaginations of young men in the years immediately after the achievement of statehood. Despite increased outmigration of youth in search of employment, many young men expressed the dream of maintaining livelihoods in the familiar towns and rural spaces of Uttarakhand, describing their home region as a source of power and agency. In rallies and in print media, young (mostly upper caste) men expressed their disillusionment with the government and the promises of statehood, arguing that their aspirations for development and employment were left unfulfilled. Gendered stories of the region, told in Hindi in rallies and print media, contained references to local places, people and historical events and were produced through local connections and know-how, fostering a regional youth politics. The article argues that Uttarakhand as a region is shaped by the politics of local actors as well as embodied forms of aspiration, affiliation and mobility.IS

    Diving into the vertical dimension of elasmobranch movement ecology

    Get PDF
    Knowledge of the three-dimensional movement patterns of elasmobranchs is vital to understand their ecological roles and exposure to anthropogenic pressures. To date, comparative studies among species at global scales have mostly focused on horizontal movements. Our study addresses the knowledge gap of vertical movements by compiling the first global synthesis of vertical habitat use by elasmobranchs from data obtained by deployment of 989 biotelemetry tags on 38 elasmobranch species. Elasmobranchs displayed high intra- and interspecific variability in vertical movement patterns. Substantial vertical overlap was observed for many epipelagic elasmobranchs, indicating an increased likelihood to display spatial overlap, biologically interact, and share similar risk to anthropogenic threats that vary on a vertical gradient. We highlight the critical next steps toward incorporating vertical movement into global management and monitoring strategies for elasmobranchs, emphasizing the need to address geographic and taxonomic biases in deployments and to concurrently consider both horizontal and vertical movements

    Observation of CP violation in B+ to DK+ decays

    Get PDF
    An analysis of B+ to DK+ and B+ to Dpi+ decays is presented where the D meson is reconstructed in the two-body final states: K+pi-, K+K-, pi+pi- and pi+K-. Using 1.0 fb-1 of LHCb data, measurements of several observables are made including the first observation of the suppressed mode B+ to DK+, D to pi+K-. CP violation in B+ to DK+ decays is observed with 5.8 sigma significance

    Measurement of the Ds+ - Ds- production asymmetry in 7 TeV pp collisions

    Get PDF
    Heavy quark production in 7 TeV centre-of-mass energy pp collisions at the LHC is not necessarily flavour symmetric. The production asymmetry, A_P, between Ds+ and Ds- mesons is studied using the \phi\pi(+/-) decay mode in a data sample of 1.0/fb collected with the LHCb detector. The difference between \pi+ and \pi- detection efficiencies is determined using the ratios of fully reconstructed to partially reconstructed D*(+/-) decays. The overall production asymmetry in the Ds rapidity region 2.0 to 4.5 with transverse momentum larger than 2 GeV is measured to be A_P=(-0.33 +/- 0.22 +/- 0.10)%. This result can constrain models of heavy flavour production.Comment: 13 pages, 10 figures, updated to published versio
    corecore