136 research outputs found
Impact of fertiliser, water table, and warming on celery yield and CO2 and CH4 emissions from fenland agricultural peat
Peatlands are globally important areas for carbon preservation; although covering only 3% of global land area, they store 30% of total soil carbon. Lowland peat soils can also be very productive for agriculture, but their cultivation requires drainage as most crops are intolerant of root-zone anoxia. This leads to the creation of oxic conditions in which organic matter becomes vulnerable to mineralisation. Given the demand for high quality agricultural land, 40% of the UK's peatlands have been drained for agricultural use.
In this study we present the outcomes of a controlled environment experiment conducted on agricultural fen peat to examine possible trade-offs between celery growth (an economically important crop on the agricultural peatlands of eastern England) and emissions of greenhouse gases (carbon dioxide (CO2) and methane (CH4)) at different temperatures (ambient and ambient +5âŻÂ°C), water table levels (â30âŻcm, and â50âŻcm below the surface), and fertiliser use.
Raising the water table from â50âŻcm to â30âŻcm depressed yields of celery, and at the same time decreased the entire ecosystem CO2 loss by 31%. A 5âŻÂ°C temperature increase enhanced ecosystem emissions of CO2 by 25% and increased celery dry shoot weight by 23% while not affecting the shoot fresh weight. Fertiliser addition increased both celery yields and soil respiration by 22%. Methane emissions were generally very low and not significantly different from zero.
Our results suggest that increasing the water table can lower emissions of greenhouse gases and reduce the rate of peat wastage, but reduces the productivity of celery. If possible, the water table should be raised to â30âŻcm before and after cultivation, and only decreased during the growing season, as this would reduce the overall greenhouse gas emissions and peat loss, potentially not affecting the production of vegetable crops
Biotic changes around the radioisotopically constrained Carboniferous-Permian boundary in the Boskovice Basin (Czech Republic)
Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter
Showers produced by positive hadrons in the highly granular CALICE
scintillator-steel analogue hadron calorimeter were studied. The experimental
data were collected at CERN and FNAL for single particles with initial momenta
from 10 to 80 GeV/c. The calorimeter response and resolution and spatial
characteristics of shower development for proton- and pion-induced showers for
test beam data and simulations using Geant4 version 9.6 are compared.Comment: 26 pages, 16 figures, JINST style, changes in the author list, typos
corrected, new section added, figures regrouped. Accepted for publication in
JINS
Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter
We present a study of showers initiated by electrons, pions, kaons, and
protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE
scintillator-tungsten analogue hadronic calorimeter. The data were recorded at
the CERN Super Proton Synchrotron in 2011. The analysis includes measurements
of the calorimeter response to each particle type as well as measurements of
the energy resolution and studies of the longitudinal and radial shower
development for selected particles. The results are compared to Geant4
simulations (version 9.6.p02). In the study of the energy resolution we include
previously published data with beam momenta from 1 GeV to 10 GeV recorded at
the CERN Proton Synchrotron in 2010.Comment: 35 pages, 21 figures, 8 table
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
A first prototype of a scintillator strip-based electromagnetic calorimeter
was built, consisting of 26 layers of tungsten absorber plates interleaved with
planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a
positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's
performance is presented in terms of the linearity and resolution of the energy
measurement. These results represent an important milestone in the development
of highly granular calorimeters using scintillator strip technology. This
technology is being developed for a future linear collider experiment, aiming
at the precise measurement of jet energies using particle flow techniques
Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter
The spatial development of hadronic showers in the CALICE scintillator-steel
analogue hadron calorimeter is studied using test beam data collected at CERN
and FNAL for single positive pions and protons with initial momenta in the
range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron
showers are parametrised with two-component functions. The parametrisation is
fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics
lists from Geant4 version 9.6. The parameters extracted from data and simulated
samples are compared for the two types of hadrons. The response to pions and
the ratio of the non-electromagnetic to the electromagnetic calorimeter
response, h/e, are estimated using the extrapolation and decomposition of the
longitudinal profiles.Comment: 38 pages, 19 figures, 5 tables; author list changed; submitted to
JINS
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
The intrinsic time structure of hadronic showers influences the timing
capability and the required integration time of hadronic calorimeters in
particle physics experiments, and depends on the active medium and on the
absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15
small plastic scintillator tiles read out with Silicon Photomultipliers, the
time structure of showers is measured on a statistical basis with high spatial
and temporal resolution in sampling calorimeters with tungsten and steel
absorbers. The results are compared to GEANT4 (version 9.4 patch 03)
simulations with different hadronic physics models. These comparisons
demonstrate the importance of using high precision treatment of low-energy
neutrons for tungsten absorbers, while an overall good agreement between data
and simulations for all considered models is observed for steel.Comment: 24 pages including author list, 9 figures, published in JINS
Simulating MADMAX in 3D: Requirements for dielectric axion haloscopes
We present 3D calculations for dielectric haloscopes such as the currently envisioned MADMAX experiment. For ideal systems with perfectly flat, parallel and isotropic dielectric disks of finite diameter, we find that a geometrical form factor reduces the emitted power by up to 30 % compared to earlier 1D calculations. We derive the emitted beam shape, which is important for antenna design. We show that realistic dark matter axion velocities of 10-3 c and inhomogeneities of the external magnetic field at the scale of 10 % have negligible impact on the sensitivity of MADMAX. We investigate design requirements for which the emitted power changes by less than 20 % for a benchmark boost factor with a bandwidth of 50 MHz at 22 GHz, corresponding to an axion mass of 90 ” eV. We find that the maximum allowed disk tilt is 100 ” m divided by the disk diameter, the required disk planarity is 20 ” m (min-to-max) or better, and the maximum allowed surface roughness is 100 ” m (min-to-max). We show how using tiled dielectric disks glued together from multiple smaller patches can affect the beam shape and antenna coupling. © 2021 The Author(s)
Greenhouse gas emissions resulting from conversion of peat swamp forest to oil palm plantation.
Conversion of tropical peat swamp forest to drainage-based agriculture alters greenhouse gas (GHG) production, but the magnitude of these changes remains highly uncertain. Current emissions factors for oil palm grown on drained peat do not account for temporal variation over the plantation cycle and only consider CO2 emissions. Here, we present direct measurements of GHGs emitted during the conversion from peat swamp forest to oil palm plantation, accounting for CH4 and N2O as well as CO2. Our results demonstrate that emissions factors for converted peat swamp forest is in the range 70-117 t CO2 eq ha-1 yr-1 (95% confidence interval, CI), with CO2 and N2O responsible for ca. 60 and ca. 40% of this value, respectively. These GHG emissions suggest that conversion of Southeast Asian peat swamp forest is contributing between 16.6 and 27.9% (95% CI) of combined total national GHG emissions from Malaysia and Indonesia or 0.44 and 0.74% (95% CI) of annual global emissions
Testing Hadronic Interaction Models using a Highly Granular Silicon-Tungsten Calorimeter
A detailed study of hadronic interactions is presented using data recorded
with the highly granular CALICE silicon-tungsten electromagnetic calorimeter.
Approximately 350,000 selected negatively charged pion events at energies
between 2 and 10 GeV have been studied. The predictions of several physics
models available within the Geant4 simulation tool kit are compared to this
data. A reasonable overall description of the data is observed; the Monte Carlo
predictions are within 20% of the data, and for many observables much closer.
The largest quantitative discrepancies are found in the longitudinal and
transverse distributions of reconstructed energy.Comment: 28 pages, 24 figures, accepted for publication in NIM
- âŠ