Exploring the effect of simulated Motion Conditions on Task Performance

This thesis explored the effect that four different areas of motion conditioning presented in a motion simulator had on defence-force based task performance. It is produced in conjunction with the Defence Science and Technology Organisation, Land Operations Division, to expand their understanding of how these conditions may affect their personnel. The four conditions are explored are Motion Sickness, Motion Fatigue, Motion Perception and Mental Workload under motion conditions. All studies involved first year psychology students enrolled at the University of Sydney in accordance with the University’s ethical guidelines (2013/388). In the study of Motion Sickness, nausea was shown to have very little detrimental effect on task performance. In long term driving exposure there was a slight negative effect on the reaction time that was linked to motion sickness symptoms. Two styles of driving were researched for Motion Fatigue: boredom and constant motion. The boredom drive was seen to have a slightly negative effect on performance compared to the motion drive. In analysing biomarkers of fatigue relevant to a defence context, the best indicators were respiratory rate and the Root Mean Square of Successive Differences between normal heart beats. In Motion Perception, 6-axes of motion at 3 intensities were tested using Defence force tasks to determine whether any one axis, or a certain intensity, negatively affected performance more than others. Higher errors occurred in the Roll direction. The Pitch direction was the least comfortable for participants. In the final chapter of Mental Workload under motion, increased workload did not have a great impact on performance, although further studies are needed. In an analysis of subjective scales of workload in simple tasks, participants were able to accurately determine their task performance. From a bio-measure perspective, pupil diameter and respiratory rate were found to be the most indicative of changing levels of workload

Study of Sun-Earth Couplings using MAGDAS/CPMN Data

第2回極域科学シンポジウム/第35回極域宙空圏シンポジウム 11月15日（火） 国立極地研究所 2階大会議

The relationship of circulating fibroblast growth factor 21 levels with pericardial fat: The Multi-Ethnic Study of Atherosclerosis.

Previous small studies have reported an association between circulating fibroblast growth factor 21 (FGF21) levels and pericardial fat volume in post-menopausal women and high cardiovascular disease (CVD) risk patients. In this study, we investigated the relationship of FGF21 levels with pericardial fat volume in participants free of clinical CVD at baseline. We analysed data from 5765 men and women from the Multi-Ethnic Study of Atherosclerosis (MESA) with both pericardial fat volume and plasma FGF21 levels measured at baseline. 4746 participants had pericardial fat volume measured in at least one follow-up exam. After adjusting for confounding factors, ln-transformed FGF21 levels were positively associated with pericardial fat volume at baseline (β = 0.055, p < 0.001). When assessing change in pericardial fat volume over a mean duration of 3.0 years using a linear mixed-effects model, higher baseline FGF21 levels were associated with higher pericardial fat volume at baseline (2.381 cm3 larger in pericardial fat volume per one SD increase in ln-transformed FGF21 levels), but less pericardial fat accumulation over time (0.191 cm3/year lower per one SD increase in ln-transformed FGF21 levels). Cross-sectionally, higher plasma FGF21 levels were significantly associated with higher pericardial fat volume, independent of traditional CVD risk factors and inflammatory markers. However, higher FGF21 levels tended to be associated with less pericardial fat accumulation over time. Nevertheless, such change in pericardial fat volume is very modest and could be due to measurement error. Further studies are needed to elucidate the longitudinal relationship of baseline FGF21 levels with pericardial fat accumulation

Effects of Fe2O3 addition and annealing on the mechanical and dissolution properties of MgO- and CaO-containing phosphate glass fibres for bio-applications

This paper investigated the preparation of phosphate glass fibres (PGFs) in the following systems: i) 45P2O5-5B2O3-5Na2O-(29-x)CaO-16MgO-(x)Fe2O3and ii) 45P2O5-5B2O3-5Na2O-24CaO-(21-x)MgO-(x)Fe2O3(where x = 5, 8 and 11 mol%) for biomedical applications. Continuous fibres of 23 ± 1 μm diameter were prepared via a melt-draw spinning process. Compositions with higher Fe2O3content and higher MgO/CaO ratio required higher melting temperature and longer heating time to achieve glass melts for fibre pulling. The effects of Fe2O3 addition and annealing treatment on mechanical properties and degradation behaviours were also investigated. Adding Fe2O3 was found to increase the tensile strength from 523 ± 63 (Ca-Fe5) to 680 ± 75 MPa (Ca-Fe11), improve the tensile modulus from 72 ± 4 (Ca-Fe5) to 78 ± 3 GPa (Ca-Fe11) and decrease the degradation rate from 4.0 (Mg-Fe5) to 1.9 × 10-6kg m-2s-1(Mg-Fe11). The annealing process reduced the fibre tensile strength by 46% (Ca-Fe5), increased the modulus by 19.6% (Ca-Fe8) and decreased the degradation rate by 89.5% (Mg-Fe11) in comparison to the corresponding as-drawn fibres. Additionally, the annealing process also impeded the formation of precipitate shells and revealed coexistence of the precipitation and the pitting corrosion as fibre degradation behaviours

Minimum requirements for publishing hydrogen, carbon, nitrogen, oxygen and sulfur stable-isotope delta results (IUPAC Technical Report)

Stable hydrogen, carbon, nitrogen, oxygen and sulfur (HCNOS) isotope compositions expressed as isotope-delta values are typically reported relative to international standards such as Vienna Standard Mean Ocean Water (VSMOW), Vienna Peedee belemnite (VPDB) or Vienna Cañon Diablo Troilite (VCDT). These international standards are chosen by convention and the calibration methods used to realise them in practice undergo occasional changes. To ensure longevity and reusability of published data, a comprehensive description of (1) analytical procedure, (2) traceability, (3) data processing, and (4) uncertainty evaluation is required. Following earlier International Union of Pure and Applied Chemistry documents on terminology and notations, this paper proposes minimum requirements for publishing HCNOS stable-isotope delta results. Each of the requirements are presented with illustrative example

Acaricide Residues in Laying Hens Naturally Infested by Red Mite Dermanyssus gallinae

In the poultry industry, control of the red mite D. gallinae primarily relies worldwide on acaricides registered for use in agriculture or for livestock, and those most widely used are carbamates, followed by amidines, pyrethroids and organophosphates. Due to the repeated use of acaricides - sometimes in high concentrations - to control infestation, red mites may become resistant, and acaricides may accumulate in chicken organs and tissues, and also in eggs. To highlight some situations of misuse/abuse of chemicals and of risk to human health, we investigated laying hens, destined to the slaughterhouse, for the presence of acaricide residues in their organs and tissues. We used 45 hens from which we collected a total of 225 samples from the following tissues and organs: skin, fat, liver, muscle, hearth, and kidney. In these samples we analyzed the residual contents of carbaryl and permethrin by LC-MS/MS

Structural, thermal and dissolution properties of MgO- and CaO-containing borophosphate glasses: effect of Fe2O3 addition

This paper investigated manufacture of high-durability phosphate glass fibres for biomedical applications. Five different borophosphate glass formulations in the systems of 45P2O5–5B2O3–5Na2O–(29 − x)CaO–16MgO–(x)Fe2O3 and 45P2O5–5B2O3–5Na2O–24CaO–(21 − x)MgO–(x)Fe2O3 where x = 5, 8 and 11 mol% were produced via melt quenching. The compositions and amorphous nature of the glasses were confirmed by ICP-MS and XRD, respectively. FTIR results indicated depolymerisation of the phosphate chains with a decrease in Q2 units with increasing Fe2O3 content. DSC analyses showed an increase in Tg by ~5 °C with an increment of 3 mol% in Fe2O3 content. The thermal properties were also used to calculate processing window (i.e. Tc,ons—Tg) and another parameter, Kgl, to determine the suitability for fibre drawing directly from melt, which equals (Tc,ons—Tg)/(Tl—Tc,ons). The degradation study conducted in PBS solution at 37 °C showed a decrease of 25–47% in degradation rate with increasing Fe2O3 content. This confirmed that the chemical durability of the glasses had increased, which was suggested to be due to Fe2O3 addition. Furthermore, the density measured via Archimedes method revealed a linear increase with increasing Fe2O3 content