Pemanfaatan Limbah Pecahan Keramik Sebagai Agregat Kasar Campuran dan Pengaruhnya Terhadap Kuat Tekan Beton

Dalam pekerjaan konstruksi, sering ditemui sisa material/bahan bangunan yang tidak terpakai, dibuang sebagai limbah. Jika limbah tersebut dibuang secara sembarangan, maka dapat menimbulkan permasalahan baru terhadap lingkungan. Limbah pecahan keramik adalah salah satu contoh limbah yang dihasilkan dari pabrik keramik atau hasil pekerjaan konstruksi bangunan. Tujuan penulisan ini untuk mengetahui apakah limbah pecahan keramik berpengaruh terhadap kuat te006Ban beton terutama untuk konstruksi sipil. Dalam penulisan ini limbah pecahan keramik digunakan sebagai pengganti agregat kasar dalam campuran beton. Rencana campuran beton dibuat sesuai dengan peraturan SNI T-15-1990-03 dengan faktor air semen 0,57. Penelitian ini menguji sampel beton dengan menggunakan benda uji kubus untuk uji tekan (15 cm x 15 cm x 15 cm). Umur pengujian selama 7 hari, 14 hari, 21 hari dan 28 hari sebanyak 60 kubus terdiri dari 5 variasi dan setiap variasi dibuat 3 sampel. Komposisi campuran limbah pecahan keramik dengan variasi 0%, 10%, 20%, 30%, dan 40% dari volume agregat kasar. Dari hasil penelitian diperoleh penurunan nilai slump pada adukan beton yang menggunakan limbah keramik. Beton dengan agregat kasar limbah pecahan keramik memiliki berat volume yang lebih kecil dan serapan air yang lebih besar dibanding beton normal. Hasil dari pengujian kuat tekan beton dalam penelitian ini menunjukkan bahwa kuat tekan beton normal 28 hari adalah sebesar 30,10 MPa, setelah mengganti agregat kasar dengan pecahan keramik maka terjadi penurunan pada kuat tekan beton, pecahan keramik 10% pada umur 28 hari menunjukkan hasil kuat tekan beton sebesar 23,95 MPa, hingga perbandingan pecahan keramik 40% pada umur 28 hari menunjukkan hasil kuat tekan sebesar 18,44 MPa. Sehingga dapat diperoleh kesimpulan penggunaan komposisi limbah pecahan keramik tidak direkomendasikan untuk struktur konstruksi bangunan

An Integrated Imaging Approach to the Study of Oxidative Stress Generation by Mitochondrial Dysfunction in Living Cells

BACKGROUND: The mechanisms of action of many environmental agents commonly involve oxidative stress resulting from mitochondrial dysfunction. Zinc is a common environmental metallic contaminant that has been implicated in a variety of oxidant-dependent toxicological responses. Unlike ions of other transition metals such as iron, copper, and vanadium, Zn(2+) does not generate reactive oxygen species (ROS) through redox cycling. OBJECTIVE: To characterize the role of oxidative stress in zinc-induced toxicity. METHODS: We used an integrated imaging approach that employs the hydrogen peroxide (H2O2)-specific fluorophore Peroxy Green 1 (PG1), the mitochondrial potential sensor 5,5 ,6,6 -tetrachloro-1,1 ,3,3 -tetraethylbenzimidazolylcarbocyanine iodide (JC-1), and the mitochondria-targeted form of the redox-sensitive genetically encoded fluorophore MTroGFP1 in living cells. RESULTS: Zinc treatment in the presence of the Zn(2+) ionophore pyrithione of A431 skin carcinoma cells preloaded with the H(2)O(2)-specific indicator PG1 resulted in a significant increase in H(2)O(2) production that could be significantly inhibited with the mitochondrial inhibitor carbonyl cyanide 3-chlorophenylhydrazone. Mitochondria were further implicated as the source of zinc-induced H(2)O(2) formation by the observation that exposure to zinc caused a loss of mitochondrial membrane potential. Using MTroGFP1, we showed that zinc exposure of A431 cells induces a rapid loss of reducing redox potential in mitochondria. We also demonstrated that zinc exposure results in rapid swelling of mitochondria isolated from mouse hearts. CONCLUSION: Taken together, these findings show a disruption of mitochondrial integrity, H(2)O(2) formation, and a shift toward positive redox potential in cells exposed to zinc. These data demonstrate the utility of real-time, live-cell imaging to study the role of oxidative stress in toxicological responses

Essential and checkpoint functions of budding yeast ATM and ATR during meiotic prophase are facilitated by differential phosphorylation of a meiotic adaptor protein, Hop1

A hallmark of the conserved ATM/ATR signalling is its ability to mediate a wide range of functions utilizing only a limited number of adaptors and effector kinases. During meiosis, Tel1 and Mec1, the budding yeast ATM and ATR, respectively, rely on a meiotic adaptor protein Hop1, a 53BP1/Rad9 functional analog, and its associated kinase Mek1, a CHK2/Rad53-paralog, to mediate multiple functions: control of the formation and repair of programmed meiotic DNA double strand breaks, enforcement of inter-homolog bias, regulation of meiotic progression, and implementation of checkpoint responses. Here, we present evidence that the multi-functionality of the Tel1/Mec1-to-Hop1/Mek1 signalling depends on stepwise activation of Mek1 that is mediated by Tel1/Mec1 phosphorylation of two specific residues within Hop1: phosphorylation at the threonine 318 (T318) ensures the transient basal level Mek1 activation required for viable spore formation during unperturbed meiosis. Phosphorylation at the serine 298 (S298) promotes stable Hop1-Mek1 interaction on chromosomes following the initial phospho-T318 mediated Mek1 recruitment. In the absence of Dmc1, the phospho-S298 also promotes Mek1 hyper-activation necessary for implementing meiotic checkpoint arrest. Taking these observations together, we propose that the Hop1 phospho-T318 and phospho-S298 constitute key components of the Tel1/Mec1- based meiotic recombination surveillance (MRS) network and facilitate effective coupling of meiotic recombination and progression during both unperturbed and challenged meiosis

The mu problem and sneutrino inflation

We consider sneutrino inflation and post-inflation cosmology in the singlet extension of the MSSM with approximate Peccei-Quinn(PQ) symmetry, assuming that supersymmetry breaking is mediated by gauge interaction. The PQ symmetry is broken by the intermediate-scale VEVs of two flaton fields, which are determined by the interplay between radiative flaton soft masses and higher order terms. Then, from the flaton VEVs, we obtain the correct mu term and the right-handed(RH) neutrino masses for see-saw mechanism. We show that the RH sneutrino with non-minimal gravity coupling drives inflation, thanks to the same flaton coupling giving rise to the RH neutrino mass. After inflation, extra vector-like states, that are responsible for the radiative breaking of the PQ symmetry, results in thermal inflation with the flaton field, solving the gravitino problem caused by high reheating temperature. Our model predicts the spectral index to be n_s\simeq 0.96 due to the additional efoldings from thermal inflation. We show that a right dark matter abundance comes from the gravitino of 100 keV mass and a successful baryogenesis is possible via Affleck-Dine leptogenesis.Comment: 27 pages, no figures, To appear in JHE

Significance of Metastatic Lymph Node Ratio on Stimulated Thyroglobulin Levels in Papillary Thyroid Carcinoma after Prophylactic Unilateral Central Neck Dissection

Background: Prognostic significance of metastatic central lymph node ratio (CLNR) in papillary thyroid carcinoma (PTC) remains unknown. Because postsurgical detectable stimulated thyroglobulin (DsTg) after radioiodine ablation may imply persistent or recurrent disease, we evaluated the association between CLNR and rate of DsTg in patients with PTC who underwent unilateral prophylactic central neck dissection. Methods: To be eligible for analysis, the prophylactic central neck dissection specimen had to contain ≥3 central lymph nodes (CLNs) with ≥1 harboring metastasis. Of 129 specimens, 51 (39.5%) were eligible. CLNR was calculated as follows: (number of metastatic CLNs/number of CLNs retrieved) × 100. They were categorized into group 1 (CLNR 66.67%) (n = 22). Postablation sTg level was measured 6 months after radioiodine ablation. A multivariate analysis was conducted to identify factors for postablation DsTg. Results: Young age, palpable neck swelling, large tumor size, advanced tumor, node, metastasis system (TNM) stage, and large number of metastatic CLNs were significantly associated with high CLNR (Ppublished_or_final_versionSpringer Open Choice, 21 Feb 201

Elemental hydrochemistry assessment on its variation and quality status in Langat River, Western Peninsular Malaysia.

This paper discusses the hydrochemistry variation and its quality status in Langat River, based on the chemistry of major ions, metal concentrations and suitability for drinking purposes. Water samples were collected from 30 different stations to assess their hydrochemical characteristics. The physico-chemical parameters selected were temperature, electrical conductivity, total dissolved solids (TDS), salinity, dissolved oxygen , pH, redox potential, HCO3, Cl, SO4, NO3, Ca, Na, K, Mg, 27Al, 138Ba, 9Be, 111Cd, 59Co, 63Cu, 52Cr, 57Fe, 55Mn, 60Ni, 208Pb, 80Se and 66Zn to investigate the variation of the constituents in the river water. Most of the parameters comply with the Drinking Water Quality Standard of the World Health Organization and the Malaysian National Standard for Drinking Water Quality by the Malaysia Ministry of Health except for EC, TDS, Cl, HCO3, SO4, Na, Mg, Al, Fe and Se. The results show that the Langat River is unsuitable for drinking purposes directly without treatment

Three little pieces for computer and relativity

Numerical relativity has made big strides over the last decade. A number of problems that have plagued the field for years have now been mostly solved. This progress has transformed numerical relativity into a powerful tool to explore fundamental problems in physics and astrophysics, and I present here three representative examples. These "three little pieces" reflect a personal choice and describe work that I am particularly familiar with. However, many more examples could be made.Comment: 42 pages, 11 figures. Plenary talk at "Relativity and Gravitation: 100 Years after Einstein in Prague", June 25 - 29, 2012, Prague, Czech Republic. To appear in the Proceedings (Edition Open Access). Collects results appeared in journal articles [72,73, 122-124

Search for astronomical neutrinos from blazar TXS 0506+056 in super-kamiokande

We report a search for astronomical neutrinos in the energy region from several GeV to TeV in the direction of the blazar TXS 0506+056 using the Super-Kamiokande detector following the detection of a 100 TeV neutrinos from the same location by the IceCube collaboration. Using Super-Kamiokande neutrino data across several data samples observed from 1996 April to 2018 February we have searched for both a total excess above known backgrounds across the entire period as well as localized excesses on smaller timescales in that interval. No significant excess nor significant variation in the observed event rate are found in the blazar direction. Upper limits are placed on the electron- and muon-neutrino fluxes at the 90% confidence level as 6.0 × 10−7 and 4.5 × 10−7–9.3 × 10−10 [erg cm−2 s−1], respectively

AMS 3.0: prediction of post-translational modifications

<p>Abstract</p> <p>Background</p> <p>We present here the recent update of AMS algorithm for identification of post-translational modification (PTM) sites in proteins based only on sequence information, using artificial neural network (ANN) method. The query protein sequence is dissected into overlapping short sequence segments. Ten different physicochemical features describe each amino acid; therefore nine residues long segment is represented as a point in a 90 dimensional space. The database of sequence segments with confirmed by experiments post-translational modification sites are used for training a set of ANNs.</p> <p>Results</p> <p>The efficiency of the classification for each type of modification and the prediction power of the method is estimated here using recall (sensitivity), precision values, the area under receiver operating characteristic (ROC) curves and leave-one-out tests (LOOCV). The significant differences in the performance for differently optimized neural networks are observed, yet the AMS 3.0 tool integrates those heterogeneous classification schemes into the single consensus scheme, and it is able to boost the precision and recall values independent of a PTM type in comparison with the currently available state-of-the art methods.</p> <p>Conclusions</p> <p>The standalone version of AMS 3.0 presents an efficient way to indentify post-translational modifications for whole proteomes. The training datasets, precompiled binaries for AMS 3.0 tool and the source code are available at <url>http://code.google.com/p/automotifserver</url> under the Apache 2.0 license scheme.</p

Cation-swapped homogeneous nanoparticles in perovskite oxides for high power density

Exsolution has been intensively studied in the fields of energy conversion and storage as a method for the preparation of catalytically active and durable metal nanoparticles. Under typical conditions, however, only a limited number of nanoparticles can be exsolved from the host oxides. Herein, we report the preparation of catalytic nanoparticles by selective exsolution through topotactic ion exchange, where deposited Fe guest cations can be exchanged with Co host cations in PrBaMn1.7Co0.3O5+delta. Interestingly, this phenomenon spontaneously yields the host PrBaMn1.7Fe0.3O5+delta, liberating all the Co cations from the host owing to the favorable incorporation energy of Fe into the lattice of the parent host (Delta E-incorporation = -0.41 eV) and the cation exchange energy (Delta E-exchange = -0.34 eV). Remarkably, the increase in the number of exsolved nanoparticles leads to their improved catalytic activity as a solid oxide fuel cell electrode and in the dry reforming of methane