197 research outputs found
A secondary ionization mass spectrometry calibration of Cibicidoides pachyderma Mg/Ca with temperature
Author Posting. © American Geophysical Union, 2008. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 9 (2008): Q04009, doi:10.1029/2007GC001620.An evaluation of C. pachyderma Mg/Ca using a new suite of warm water multicores from the Florida Straits shows that the slope of Mg/Ca with temperature is shallower than previously thought. Using secondary ionization mass spectrometry, we have documented that the distribution of magnesium within the polished walls of foraminiferal tests is Gaussian, suggesting that the Mg/Ca in these samples is not affected by the addition of a secondary high-magnesium calcite in the walls. The Mg/Ca within a typical C. pachyderma test varies by about ±20% (1σ/μ · 100), and the variability increases slightly in tests with higher Mg/Ca. The regression of C. pachyderma Mg/Ca with temperature has a slope of 0.13 ± 0.05 mmol mol−1 per °C, indistinguishable from the slope observed in inductively coupled plasma–mass spectrometry measurements from a different subset of the same multicores, but about one half the slope of previously published calibrations. The largest differences between the calibrations comes at the warm water end of the regression, where previously published C. pachyderma Mg/Ca values from Little Bahama Bank are at least 3 mmol mol−1 higher than observed in these new cores. The reasons for this difference are not fully known but are most likely related to diagenesis at Little Bahama Bank.This
research was supported by several grants from the National
Science Foundation: OCE0096469 to W.B.C. for cruise support
to collect the Florida Straits cores; ATM0502428 and
OCE0550271 to W. B. C. for support to obtain the Mg/Ca data
on the ion probe; and OCE0425522 and OCE0550150 to T. M.
for the core top calibration study using ICP-MS
The Atlantic Ocean at the last glacial maximum: 1. Objective mapping of the GLAMAP sea-surface conditions
Recent efforts of the German paleoceanographic community have resulted in a unique data set of reconstructed sea-surface temperature for the Atlantic Ocean during the Last Glacial Maximum, plus estimates for the extents of glacial sea ice. Unlike prior attempts, the contributing research groups based their data on a common definition of the Last Glacial Maximum chronozone and used the same modern reference data for calibrating the different transfer techniques. Furthermore, the number of processed sediment cores was vastly increased. Thus the new data is a significant advance not only with respect to quality, but also to quantity. We integrate these new data and provide monthly data sets of global sea-surface temperature and ice cover, objectively interpolated onto a regular 1°x1° grid, suitable for forcing or validating numerical ocean and atmosphere models. This set is compared to an existing subjective interpolation of the same base data, in part by employing an ocean circulation model. For the latter purpose, we reconstruct sea surface salinity from the new temperature data and the available oxygen isotope measurements
Seismic Expression of Pleistocene Paleoceanographic Changes in the California Borderland from Digitally Acquired 3.5 Khz Subbottom Profiles and Ocean Drilling Program Leg 167 Drilling
We correlate processed 3.5 kHz seismic profiles with physical properties of cores collected during ODP Leg 167 from the Tanner, East Cortes, and San Nicolas Basins through much of the Pleistocene succession. Results indicate that seismic horizons in the unconsolidated Pleistocene sediments (top 50 m) are mainly controlled by density contrasts. Removing of the compaction trend from the density reveals a very interesting relationship between density and composition - the density closely and inversely correlates with organic carbon indicating that large-scale variations in organic carbon are responsible for seismic reflections through their influence on density. This is a significant discovery since there apparently is no other paleoceanographic setting that we know of where such a close linkage between acoustic properties and organic carbon has been established. The variations in organic carbon are mainly marine in origin and derive from variations in primary productivity associated with upwelling and the preservation regime related to oxygenation of water. Pleistocene reflections on 3.5 kHz profiles in the Borderland province thus record regional cyclical fluctuations in the paleoclimatic signals. The close resemblance in the density profiles at the three different basins indicates that the sedimentary regime was similar in those basins through the Pleistocene. These common density patterns produce regional seismic horizons that correlate well among the basins. It is likely these correlated and dated horizons could be extrapolated to other Borderland basins (e.g., San Clemente), where they can potentially be used as time markers for neotectonic studies in the region
Isotopic Variability of Mercury in Ore, Mine-Waste Calcine, and Leachates of Mine-Waste Calcine from Areas Mined for Mercury
The isotopic composition of mercury (Hg) was determined in cinnabar ore, mine-waste calcine (retorted ore), and leachates obtained from water leaching experiments of calcine from two large Hg mining districts in the U.S. This study is the first to report significant mass-dependent Hg isotopic fractionation between cinnabar ore and resultant calcine. Data indicate that δ202Hg values relative to NIST 3133 of calcine (up to 1.52‰) in the Terlingua district, Texas, are as much as 3.24‰ heavier than cinnabar (−1.72‰) prior to retorting. In addition, δ202Hg values obtained from leachates of Terlingua district calcines are isotopically similar to, or as much as 1.17‰ heavier than associated calcines, most likely due to leaching of soluble, byproduct Hg compounds formed during ore retorting that are a minor component in the calcines. As a result of the large fractionation found between cinnabar and calcine, and because calcine is the dominant source of Hg contamination from the mines studied, δ202Hg values of calcine may be more environmentally important in these mined areas than the primary cinnabar ore. Measurement of the Hg isotopic composition of calcine is necessary when using Hg isotopes for tracing Hg sources from areas mined for Hg, especially mine water runoff
The flower garden banks Siderastrea siderea coral as a candidate global boundary stratotype section and point for the Anthropocene series
The proposed Anthropocene Global Boundary Stratotype Section and Point (GSSP) candidate site of West Flower Garden Bank (27.8762°N, 93.8147°W) is an open ocean location in the Gulf of Mexico with a submerged coral reef and few direct human impacts. Corals contain highly accurate and precise (<±1 year) internal chronologies, similar to tree rings, and their exoskeletons are formed of aragonite and can be preserved in the rock record. Here we present results from a large Siderastrea siderea coral (core 05WFGB3; 1755–2005 CE) sampled with annual and monthly resolutions that show clear markers of global and regional human impacts. Atmospheric nuclear bomb testing by-products (14C, 239+240Pu) have clear increases in this coral starting in 1957 for 14C and the first increase in 1956 for 239+240Pu (potential bases for the Anthropocene GSSP). Coral δ13C declined especially after 1956 consistent with the Suess Effect resulting from the burning of fossil fuels. Coral skeletal δ15N starts to increase in 1963 corresponding with the increase in agricultural fertilizers. Coral Hg concentrations (1933–1980) loosely track fluctuations in industrial pollution and coral Ba/Ca increases from 1965–1983 when offshore oil operations expand after 1947. Coral temperature proxies contain the 20th-century global warming trend whereas coral growth declines during this interval
Defining the scope of the European Antimicrobial Resistance Surveillance network in Veterinary medicine (EARS-Vet): a bottom-up and One Health approach
Background Building the European Antimicrobial Resistance Surveillance network in Veterinary medicine (EARS-Vet) was proposed to strengthen the European One Health antimicrobial resistance (AMR) surveillance approach. Objectives To define the combinations of animal species/production types/age categories/bacterial species/specimens/antimicrobials to be monitored in EARS-Vet. Methods The EARS-Vet scope was defined by consensus between 26 European experts. Decisions were guided by a survey of the combinations that are relevant and feasible to monitor in diseased animals in 13 European countries (bottom-up approach). Experts also considered the One Health approach and the need for EARS-Vet to complement existing European AMR monitoring systems coordinated by the ECDC and the European Food Safety Authority (EFSA). Results EARS-Vet plans to monitor AMR in six animal species [cattle, swine, chickens (broilers and laying hens), turkeys, cats and dogs], for 11 bacterial species (Escherichia coli, Klebsiella pneumoniae, Mannheimia haemolytica, Pasteurella multocida, Actinobacillus pleuropneumoniae, Staphylococcus aureus, Staphylococcus pseudintermedius, Staphylococcus hyicus, Streptococcus uberis, Streptococcus dysgalactiae and Streptococcus suis). Relevant antimicrobials for their treatment were selected (e.g. tetracyclines) and complemented with antimicrobials of more specific public health interest (e.g. carbapenems). Molecular data detecting the presence of ESBLs, AmpC cephalosporinases and methicillin resistance shall be collected too. Conclusions A preliminary EARS-Vet scope was defined, with the potential to fill important AMR monitoring gaps in the animal sector in Europe. It should be reviewed and expanded as the epidemiology of AMR changes, more countries participate and national monitoring capacities improve.Peer reviewe
Azithromycin resistance in Escherichia coli and Salmonella from food-producing animals and meat in Europe.
OBJECTIVES
To characterize the genetic basis of azithromycin resistance in Escherichia coli and Salmonella collected within the EU harmonized antimicrobial resistance (AMR) surveillance programme in 2014-18 and the Danish AMR surveillance programme in 2016-19.
METHODS
WGS data of 1007 E. coli [165 azithromycin resistant (MIC > 16 mg/L)] and 269 Salmonella [29 azithromycin resistant (MIC > 16 mg/L)] were screened for acquired macrolide resistance genes and mutations in rplDV, 23S rRNA and acrB genes using ResFinder v4.0, AMRFinder Plus and custom scripts. Genotype-phenotype concordance was determined for all isolates. Transferability of mef(C)-mph(G)-carrying plasmids was assessed by conjugation experiments.
RESULTS
mph(A), mph(B), mef(B), erm(B) and mef(C)-mph(G) were detected in E. coli and Salmonella, whereas erm(C), erm(42), ere(A) and mph(E)-msr(E) were detected in E. coli only. The presence of macrolide resistance genes, alone or in combination, was concordant with the azithromycin-resistant phenotype in 69% of isolates. Distinct mph(A) operon structures were observed in azithromycin-susceptible (n = 50) and -resistant (n = 136) isolates. mef(C)-mph(G) were detected in porcine and bovine E. coli and in porcine Salmonella enterica serovar Derby and Salmonella enterica 1,4, [5],12:i:-, flanked downstream by ISCR2 or TnAs1 and associated with IncIγ and IncFII plasmids.
CONCLUSIONS
Diverse azithromycin resistance genes were detected in E. coli and Salmonella from food-producing animals and meat in Europe. Azithromycin resistance genes mef(C)-mph(G) and erm(42) appear to be emerging primarily in porcine E. coli isolates. The identification of distinct mph(A) operon structures in susceptible and resistant isolates increases the predictive power of WGS-based methods for in silico detection of azithromycin resistance in Enterobacterales
Recommended from our members
A mixed-methods feasibility study of a novel AI-enabled, web-based, clinical decision support system for the treatment of major depression in adults
Background:-
The objective of this paper is to discuss perceived clinical utility and impact on physician-patient relationship of a novel, artificial-intelligence (AI) enabled clinical decision support system (CDSS) for use in treating adults with major depression.
Methods:-
A single arm, naturalistic follow-up study aimed at assessing the acceptability and useability of the software. Patients had a baseline appointment, followed by a minimum of two appointments with the CDSS. Study exit questionnaires and interviews were conducted to assess perceived clinical utility, impact on patient-physician relationship, and understanding and trust. 7 physicians and 17 patients, of which 14 completed, consented to participate.
Results:-
86 % of physicians (6/7) felt the information provided by the CDSS provided more comprehensive understanding of patient situations. 71 % (5/7) felt the information was helpful. 86 % of physicians (6/7) reported the AI/predictive model was useful when deciding treatment. 62 % of patients (8/13) reported improved care due to the tool, and 46 %(6/13) reported a significantly or somewhat improved physician-patient relationship 54 % reported no change. 71 % of physicians (5/7) and 62 % of patients (8/13) rated trusting the tool.
Limitations:-
Small sample size and treatment changes prior to CDSS introduction limits ability to verify impact on outcomes.
Conclusions:-
Qualitative results from 12 patient exit interviews are analyzed and presented. Findings suggest physicians perceived the tool as useful in conducting appointments and used it while deciding treatment. Physicians and patients generally found the tool trustworthy, and it may have positive effects on physician-patient relationships. (Study identifier: NCT04061642)
Evaluating the clinical feasibility of an artificial intelligence–powered, web-based clinical decision support system for the treatment of depression in adults: longitudinal feasibility study
Background:- Approximately two-thirds of patients with major depressive disorder do not achieve remission during their first treatment. There has been increasing interest in the use of digital, artificial intelligence–powered clinical decision support systems (CDSSs) to assist physicians in their treatment selection and management, improving the personalization and use of best practices such as measurement-based care. Previous literature shows that for digital mental health tools to be successful, the tool must be easy for patients and physicians to use and feasible within existing clinical workflows.
Objective:- This study aims to examine the feasibility of an artificial intelligence–powered CDSS, which combines the operationalized 2016 Canadian Network for Mood and Anxiety Treatments guidelines with a neural network–based individualized treatment remission prediction.
Methods:- Owing to the COVID-19 pandemic, the study was adapted to be completed entirely remotely. A total of 7 physicians recruited outpatients diagnosed with major depressive disorder according to the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition criteria. Patients completed a minimum of one visit without the CDSS (baseline) and 2 subsequent visits where the CDSS was used by the physician (visits 1 and 2). The primary outcome of interest was change in appointment length after the introduction of the CDSS as a proxy for feasibility. Feasibility and acceptability data were collected through self-report questionnaires and semistructured interviews.
Results:- Data were collected between January and November 2020. A total of 17 patients were enrolled in the study; of the 17 patients, 14 (82%) completed the study. There was no significant difference in appointment length between visits (introduction of the tool did not increase appointment length; F2,24=0.805; mean squared error 58.08; P=.46). In total, 92% (12/13) of patients and 71% (5/7) of physicians felt that the tool was easy to use; 62% (8/13) of patients and 71% (5/7) of physicians rated that they trusted the CDSS. Of the 13 patients, 6 (46%) felt that the patient-clinician relationship significantly or somewhat improved, whereas 7 (54%) felt that it did not change.
Conclusions:- Our findings confirm that the integration of the tool does not significantly increase appointment length and suggest that the CDSS is easy to use and may have positive effects on the patient-physician relationship for some patients. The CDSS is feasible and ready for effectiveness studies
- …