104 research outputs found
Whole-body magnetic resonance imaging in pediatric oncology — recommendations by the Oncology Task Force of the ESPR
The purpose of this recommendation of the Oncology Task Force of the European Society of Paediatric Radiology (ESPR) is to indicate reasonable applications of whole-body MRI in children with cancer and to address useful protocols to optimize workflow and diagnostic performance. Whole-body MRI as a radiation-free modality has been increasingly performed over the last two decades, and newer applications, as in screening of children with germ-line mutation cancer-related gene defects, are now widely accepted. We aim to provide a comprehensive outline of the diagnostic value for use in daily practice. Based on the results of our task force session in 2018 and the revision in 2019 during the ESPR meeting, we summarized our group’s experiences in whole-body MRI. The lack of large evidence by clinical studies is challenging when focusing on a balanced view regarding the impact of whole-body MRI in pediatric oncology. Therefore, the final version of this recommendation was supported by the members of Oncology Task Force
Main Results of Phase IV BEMUSE Project: Simulation of LBLOCA in an NPP
Phase IV of BEMUSE Program is a necessary step for a subsequent uncertainty analysis. It includes the simulation of the reference
scenario and a sensitivity study. The scenario is a LBLOCA and the reference plant is Zion 1 NPP, a 4 loop PWR unit. Thirteen
participants coming from ten different countries have taken part in the exercise. The BEMUSE (Best Estimate Methods plus
Uncertainty and Sensitivity Evaluation) Programhas been promoted by theWorking Group on AccidentManagement and Analysis
(WGAMA) and endorsed by the Committee on the Safety of Nuclear Installations (CSNI). The paper presents the results of the
calculations performed by participants and emphasizes its usefulness for future uncertainty evaluation, to be performed in next
phase. The objectives of the activity are basically to simulate the LBLOCA reproducing the phenomena associated to the scenario
and also to build a common, well-known, basis for the future comparison of uncertainty evaluation results among different
methodologies and codes. The sensitivity calculations performed by participants are also presented. They allow studying the
influence of different parameters such as material properties or initial and boundary conditions, upon the behaviour of the most
relevant parameters related to the scenario
Old World megadroughts and pluvials during the Common Era
Climate model projections suggest widespread drying in the Mediterranean Basin and wetting in Fennoscandia in the coming decades largely as a consequence of greenhouse gas forcing of climate. To place these and other “Old World” climate projections into historical perspective based on more complete estimates of natural hydroclimatic variability, we have developed the “Old World Drought Atlas” (OWDA), a set of year-to-year maps of tree-ring reconstructed summer wetness and dryness over Europe and the Mediterranean Basin during the Common Era. The OWDA matches historical accounts of severe drought and wetness with a spatial completeness not previously available. In addition, megadroughts reconstructed over north-central Europe in the 11th and mid-15th centuries reinforce other evidence from North America and Asia that droughts were more severe, extensive, and prolonged over Northern Hemisphere land areas before the 20th century, with an inadequate understanding of their causes. The OWDA provides new data to determine the causes of Old World drought and wetness and attribute past climate variability to forced and/or internal variability
PREMIUM, a benchmark on the quantification of the uncertainty of the physical models in the system thermal-hydraulic codes: methodologies and data review
The objective of the Post-BEMUSE Reflood Model Input Uncertainty Methods (PREMIUM) benchmark is to progress on the issue of the quantification of the uncertainty of the physical models in system thermalhydraulic codes by considering a concrete case: the physical models involved in the prediction of core reflooding. The present document was initially conceived as a final report for the Phase I “Introduction and Methodology Review” of the PREMIUM benchmark. The objective of Phase I is to refine the definition of the benchmark and publish the available methodologies of model input uncertainty quantification relevant to the objectives of the benchmark. In this initial version the document was approved by WGAMA and has shown its usefulness during the subsequent phases of the project. Once Phase IV was completed, and following the suggestion of WGAMA members, the document was updated adding a few new sections, particularly the description of four new methodologies that were developed during this activity. Such developments were performed by some participants while contributing to PREMIUM progress (which is why this report arrives after those of other phases). After this revision the document title was changed to “PREMIUM methodologies and data review”. The introduction includes first a chapter devoted to contextualization of the benchmark in nuclear safety research and licensing, followed by a description of the PREMIUM objectives. Next, a description of the Phases in which the benchmark is divided and its organization is explained. Chapter two consists of a review of the involvement of the different participants, making a brief explanation of the input uncertainty quantification methodologies used in the activity. The document ends with some conclusions on the development of Phase I, some more general remarks and some statements on the benefits of the benchmark, which can be briefly summarized as it follows:
- Contribution to development of tools and experience related to uncertainty calculation and promotion of the use of BEPU approaches for licensing and safety assessment purposes;
- Contribution to prioritization of improvements to thermal-hydraulic system codes;
- Contribution to a fluent and close interaction between the scientific community and regulatory organizations.
Appendices include the complete description of the experimental data FEBA/SEFLEX used in the benchmark and the methodologies CIRCÉ and FFTBM and the general requirements and description specification used for Phase I. Due to the revision of the document, four extra appendixes have been added related to the methods developed during the activity, MCDA DIPE, Tractebel IUQ and PSI methods
A large multi-country outbreak of monkeypox across 41 countries in the WHO European Region, 7 March to 23 August 2022
Following the report of a non-travel-associated cluster of monkeypox cases by the United Kingdom in May 2022, 41 countries across the WHO European Region have reported 21,098 cases and two deaths by 23 August 2022. Nowcasting suggests a plateauing in case notifications. Most cases (97%) are MSM, with atypical rash-illness presentation. Spread is mainly through close contact during sexual activities. Few cases are reported among women and children. Targeted interventions of at-risk groups are needed to stop further transmission. © 2022 European Centre for Disease Prevention and Control (ECDC). All rights reserved.The authors affiliated with the World Health Organization (WHO) are alone responsible for the views expressed in this publication and they do not necessarily represent the decisions or policies of the WHO. The co-author is a fellow of the ECDC Fellowship Programme, supported financially by the European Centre for Disease Prevention and Control (ECDC). The views and opinions expressed herein do not state or reflect those of ECDC. ECDC is not responsible for the data and information collation and analysis and cannot be held liable for conclusions or opinions drawn
The potential risks and impact of the start of the 2015–2016 influenza season in the WHO European Region: a rapid risk assessment
Background: Countries in the World Health Organization (WHO) European Region are reporting more severe influenza activity in the 2015–2016 season compared to previous seasons. Objectives: To conduct a rapid risk assessment to provide interim information on the severity of the current influenza season. Methods: Using the WHO manual for rapid risk assessment of acute public health events and surveillance data available from Flu News Europe, an assessment of the current influenza season from 28 September 2015 (week 40/2015) up to 31 January 2016 (week 04/2016) was made compared with the four previous seasons. Results: The current influenza season started around week 51/2015 with higher influenza activity reported in Eastern Europe compared to Western Europe. There is a strong predominance of influenza A(H1N1)pdm09 compared to previous seasons, but the virus is antigenically similar to the strain included in the seasonal influenza vaccine. Compared to the 2014/2015 season, there was a rapid increase in the number of severe cases in Eastern European countries with the majority of such cases occurring among adults aged < 65 years. Conclusions: The current influenza season is characterized by an early start in Eastern European countries, with indications of a more severe season. Currently circulating influenza A(H1N1)pdm09 viruses are antigenically similar to those included in the seasonal influenza vaccine, and the vaccine is expected to be effective. Authorities should provide information to the public and health providers about the current influenza season, recommendations for the treatment of severe disease and effective public health measures to prevent influenza transmission
Regional Patterns of Late Medieval and Early Modern European Building Activity Revealed by Felling Dates
Although variations in building activity are a useful indicator of societal well-being and demographic development, historical datasets for larger regions and longer periods are still rare. Here, we present 54,045 annually precise dendrochronological felling dates from historical construction timber from across most of Europe between 1250 and 1699 CE to infer variations in building activity. We use geostatistical techniques to compare spatiotemporal dynamics in past European building activity against independent demographic, economic, social and climatic data. We show that the felling dates capture major geographical patterns of demographic trends, especially in regions with dense data coverage. A particularly strong negative association is found between grain prices and the number of felling dates. In addition, a significant positive association is found between the number of felling dates and mining activity. These strong associations, with well-known macro-economic indicators from pre-industrial Europe, corroborate the use of felling dates as an independent source for exploring large-scale fluctuations of societal well-being and demographic development. Three prominent examples are the building boom in the Hanseatic League region of northeastern Germany during the 13th century, the onset of the Late Medieval Crisis in much of Europec. 1300, and the cessation of building activity in large parts of central Europe during armed conflicts such as the Thirty Years’ War (1618–1648 CE). Despite new insights gained from our European-wide felling date inventory, further studies are needed to investigate changes in construction activity of high versus low status buildings, and of urban versus rural buildings, and to compare those results with a variety of historical documentary sources and natural proxy archives.</jats:p
Tree rings reveal globally coherent signature of cosmogenic radiocarbon events in 774 and 993 CE
This study was funded by the WSL-internal COSMIC project (5233.00148.001.01), the ETHZ (Laboratory of Ion Beam Physics), the Swiss National Science Foundation (SNF Grant 200021L_157187/1), and as the Czech Republic Grant Agency project no. 17-22102s.Though tree-ring chronologies are annually resolved, their dating has never been independently validated at the global scale. Moreover, it is unknown if atmospheric radiocarbon enrichment events of cosmogenic origin leave spatiotemporally consistent fingerprints. Here we measure the 14C content in 484 individual tree rings formed in the periods 770–780 and 990–1000 CE. Distinct 14C excursions starting in the boreal summer of 774 and the boreal spring of 993 ensure the precise dating of 44 tree-ring records from five continents. We also identify a meridional decline of 11-year mean atmospheric radiocarbon concentrations across both hemispheres. Corroborated by historical eye-witness accounts of red auroras, our results suggest a global exposure to strong solar proton radiation. To improve understanding of the return frequency and intensity of past cosmic events, which is particularly important for assessing the potential threat of space weather on our society, further annually resolved 14C measurements are needed.Publisher PDFPeer reviewe
Badania nad stanem procesów fermentacji w Republice Czeskiej
This paper focuses on increasing quantities of digestate which is a final product of anaerobic digestion in biogas stations used as alternative sources of energy or as fermenting facilities which can reduce the quantities of biodegradable wastes on landfills. Digestate is a stabilised material produced by anaerobic digestion in a biogas station in addition to the main product - biogas. Potential use of digestate is limited due to its rather specific physical properties. In particular, individual components in digestate are extremely difficult to separate and its chemical or microbiological composition is special. The quality of digestate is affected mostly by the type of biomass. This paper presents current approaches to digestate and digestate management. It also includes taking and analysing digestate samples, processing of the samples in laboratory centrifuges and assessing the properties of digestate and separation products, i.e. the sludge liquor and separatum.Niniejszy referat koncentruje się na zwiększaniu ilości produktu pofermentacyjnego, który jest finalnym produktem fermentacji beztlenowej w stacjach biogazu używanych jako alternatywne źródło energii lub jako zakłady fermentacyjne, które mogą redukować ilości odpadów biodegradowalnych na składowiskach. Produkt pofermentacyjny jest materiałem powstałym w fermentacji beztlenowej w stacji biogazu będący dodatkiem do produktu głównego – biogazu. Potencjalne zastosowanie tego produktu jest ograniczone ze względu na jego specyficzne właściwości fizyczne. W szczególności jego pojedyncze składniki są niezwykle trudne do oddzielenia a jego skład chemiczny bądź mikrobiologiczny jest unikalny. Na jakość produktu pofermentacyjnego wpływa głównie rodzaj biomasy z której powstaje. Referat przedstawia aktualne podejście do gospodarki produktem pofermentacyjnym. Zawiera również sposób pobierania i analizy produktu pofermentacyjnego, przetwarzanie próbek w laboratoryjnych wirówkach oraz ocenę właściwości i oddzielenie produktów, tj. cieczy osadowej i substancji oddzielonej
On the palaeoclimatic potential of a millennium-long oak ring width chronology from Slovakia
- …