Procedimiento para la purificación de Triglicéridos que contienen ácido Estearidónico en posición SN-2

Número de publicación: ES2363518 A1 (08.08.2011)También publicado como: ES2363518 A8 (10.04.2012), ES2363518 B1 (13.06.2012)Número de Solicitud: Consulta de Expedientes OEPM (C.E.O.) P201000070(23.01.2010)Procedimiento para la purificación de triglicéridos que contiene ácido estearidónico en posición sn-2. La invención se refiere a un procedimiento para la purificación de TGs ricos en SDA en posición sn-2 mediante cromatografía en columna gravimétrica, a un extracto de TGs ricos en SDA en posición sn-2 obtenido mediante dicho procedimiento y su uso en la industria.Univerisda de Almerí

Technical, economic and environmental evaluation of advanced tertiary treatments for micropollutants removal (oxidation and adsorption)

International audienceTwo pilots for tertiary treatment, an advanced oxidation processes (AOP - O3/UV/H2O2) pilot and a granular activated carbon pilot, were tested in three different wastewater treatment plants after a secondary treatment. A total of 64 micropollutants including drugs, pesticides, alkylphenols, PAHs and metals were analysed in the samples at the inlet and the outlet of the pilots. The tertiary treatments studied (ozone, AOP and activated carbon) were efficient for the removal of most of the compounds analysed in this study, except metals. The addition of hydrogen peroxide to ozone increased the number of substances well removed but it did not improve the removal of substances that readily react with ozone (such as betablockers or carbamazepine). The other AOP (ozone/H2O2 and UV/H2O2) did not improve the number of substances well removed in comparison with ozone alone. The granular activated carbon was still efficient (R>70%) after 6 months working 24/7 for most of the drugs and the urea and triazine pesticides. The 5 technologies studied were sized at full scale in order to calculate their cost for two sizes of WWTP. The implementation of a tertiary treatment on a 60 000 to 200 000 PE WWTP would increase the wastewater treatment cost by 1,5 to 17,6 euros cents per cubic meter treated according to the technology and the removal objective. Concerning the environmental impact, for the big WWTP, the activated carbon is more impacting than the other processes for most of the impacts calculated. The order of POA by increasing environmental impact is ozone < ozone/H2O2 < ozone/UV ~ UV/H2O2. For the medium size WWTP however, the activated carbon is comparable to the other solutions regarding environmental impact

Eureka and beyond: mining's impact on African urbanisation

This collection brings separate literatures on mining and urbanisation together at a time when both artisanal and large-scale mining are expanding in many African economies. While much has been written about contestation over land and mineral rights, the impact of mining on settlement, notably its catalytic and fluctuating effects on migration and urban growth, has been largely ignored. African nation-states’ urbanisation trends have shown considerable variation over the past half century. The current surge in ‘new’ mining countries and the slow-down in ‘old’ mining countries are generating some remarkable settlement patterns and welfare outcomes. Presently, the African continent is a laboratory of national mining experiences. This special issue on African mining and urbanisation encompasses a wide cross-section of country case studies: beginning with the historical experiences of mining in Southern Africa (South Africa, Zambia, Zimbabwe), followed by more recent mineralizing trends in comparatively new mineral-producing countries (Tanzania) and an established West African gold producer (Ghana), before turning to the influence of conflict minerals (Angola, the Democratic Republic of Congo and Sierra Leone)

Silicone rubber selection for passive sampling of pesticides in water.

The authors thank G. Raffin and M. Hangouet (ISA, UMR 5280) for TGA analysis and interpretation, and C. Guillemain (Irstea) for analytical support.International audienceSilicone rubber can extract organic compounds with a broad range of polarities (logKow>2-3) from aqueous samples. Such compounds include substances of major concern in the protection of aquatic ecosystems and human health, e.g. pesticides. Silicone rubbers (SRs) with various characteristics have been successfully used in sorptive methods for water sample extraction in the laboratory (SPME, SBSE), and for passive sampling in aquatic environments. However, only few studies have evaluated variability in organic compound sorption due to the origin of SRs, particularly for pesticides. The aim of this study was to select an SR for the extraction of pesticides from water samples by passive sampling. To this end we measured the impact of seven SR formulations on sorption capacity, defined by the partition coefficient (Ksw). Kinetic experiments and sorption isotherms were performed to determine extraction recovery as a selection criterion for SRs, and pesticide partition coefficients. Very large differences in affinity for pesticides were found between two kinds of SRs: "Polymerized SR kits" and "Manufactured SRs". One SR was chosen among the "Manufactured SRs", and the Ksw values of 21 pesticides were determined, filling a gap in the literature (1.50<logKow<5.51). In light of sorption properties, literature data and additional economic and technical factors, we suggest using SR from Goodfellow in future work to reduce the variability of Ksw literature values

Factors Driving Mercury Variability in the Arctic Atmosphere and Ocean over the Past 30 Years

[1] Long-term observations at Arctic sites (Alert and Zeppelin) show large interannual variability (IAV) in atmospheric mercury (Hg), implying a strong sensitivity of Hg to environmental factors and potentially to climate change. We use the GEOS-Chem global biogeochemical Hg model to interpret these observations and identify the principal drivers of spring and summer IAV in the Arctic atmosphere and surface ocean from 1979–2008. The model has moderate skill in simulating the observed atmospheric IAV at the two sites (r ~ 0.4) and successfully reproduces a long-term shift at Alert in the timing of the spring minimum from May to April (r = 0.7). Principal component analysis indicates that much of the IAV in the model can be explained by a single climate mode with high temperatures, low sea ice fraction, low cloudiness, and shallow boundary layer. This mode drives decreased bromine-driven deposition in spring and increased ocean evasion in summer. In the Arctic surface ocean, we find that the IAV for modeled total Hg is dominated by the meltwater flux of Hg previously deposited to sea ice, which is largest in years with high solar radiation (clear skies) and cold spring air temperature. Climate change in the Arctic is projected to result in increased cloudiness and strong warming in spring, which may thus lead to decreased Hg inputs to the Arctic Ocean. The effect of climate change on Hg discharges from Arctic rivers remains a major source of uncertainty.Earth and Planetary SciencesEngineering and Applied Science

Generation of Five Induced Pluripotent Stem Cell Lines from Patients with MECP2 Duplication Syndrome

MECP2 Duplication Syndrome (MDS) is a rare, severe neurodevelopmental disorder arising from duplications in the Xq28 region containing the MECP2 gene that predominantly affects males. We generated five human induced pluripotent stem cell (iPSC) lines from the fibroblasts of individuals carrying between 0.355 and 11.2 Mb size duplications in the chromosomal locus containing MECP2. All lines underwent extensive testing to confirm MECP2 duplication and iPSC-related features such as morphology, pluripotency markers, and trilineage differentiation potential. These lines are a valuable resource for molecular and functional studies of MDS as well as screening for a variety of therapeutic approaches