592 research outputs found
Hydrothermal stable templated molecular sieve silica (TMSS) membranes for gas separation
In this work we compare the hydrothermal stability performance of a Templated Molecular Sieve Silica (TMSS) membrane against a standard, non-templated Molecular Sieve Silica (MSS) membrane. The tests were carried under dry and wet (steam) conditions for single gas (He, H2, CO and CO2) at 1-2 atm membrane pressure drop at 200oC. Single gas TMSS membrane H2, permeance and H2/CO permselectivity was found to be 2.05 x 10-8 mols.m-2.s-1.Pa-1 and 15, respectively. The MSS membrane showed similar selectivity, but increased overall flux. He permeance through membranes decayed at a rate of 4-5 x 10-10 mols.m-2.s-1.Pa-1 per day regardless of membrane ambience (dry or wet). Although H2/CO permselectivity of the TMSS membrane slightly improved from 15 to 18 after steam testing, the MSS membrane resulted in significant reduction from 16 to 8.3. In addition, membrane regeneration after more than 50 days resulted in the TMSS membrane reverting to its original permeation levels while no significant improvements were observed for the MSS membra ne. Results showed that the TMSS membrane had enhanced hydrothermal stability and regeneration ability
Ultramicroporous membranes for hydrogen separation
Fuel cell systems offer excellent efficiencies when compared to internal combustion engines, which result in reduced fuel consumption and greenhouse gas emissions. One of the areas requiring research for the success of fuel cell technology is the H2 fuel purification to reduce CO, which is a poison to fuel cells. Molecular sieve silica (MSS) membranes have a potential application in this area. In this work showed activated transport, a characteristic of ultramicroporous (d
Role of electromagnetically induced transparency in resonant four-wave-mixing schemes.
Published versio
Forces Sauces and Eggs for Soldiers: food, nostalgia, and the rehabilitation of the British military
This article identifies, and considers the political implications of, the association of the contemporary British military and British soldiers with nostalgia. This aspect of the discursive project of rehabilitating the British military post-Iraq has not hitherto been theorized. The article analyses a set of exemplifying texts, four military charity food brands (Eggs for Soldiers, Forces Sauces, Red Lion Foods, and Rare Tea Company Battle of Britain Tea) to ask how nostalgic rehabilitation of the British military unfolds at the intersections of militarization, commemoration, and post-2008 “conscience capitalism”. I outline how military charity food brands are a form of “conscience capitalism” through which the perpetuation of militarized logics are produced as a notionally apolitical social “cause”, rendered intelligible within the terms of existing commoditized discourses of post-2008 vintage nostalgia. I then ask what understandings of British soldiers and the British military are constituted within the discourse of nostalgic rehabilitation, and secondly what forms of commemoration are entailed. I argue that a nostalgic generalization of soldiers and the military nullifies the potential unruliness of individual soldiers and obscures the specifics of recent, controversial, wars. Secondly nostalgic civil–military engagement entails a commemorative logic in which forms of quasi-military service are brought into the most banal spaces of everyday civilian life
Atomic-scale modeling of the deformation of nanocrystalline metals
Nanocrystalline metals, i.e. metals with grain sizes from 5 to 50 nm, display
technologically interesting properties, such as dramatically increased
hardness, increasing with decreasing grain size. Due to the small grain size,
direct atomic-scale simulations of plastic deformation of these materials are
possible, as such a polycrystalline system can be modeled with the
computational resources available today.
We present molecular dynamics simulations of nanocrystalline copper with
grain sizes up to 13 nm. Two different deformation mechanisms are active, one
is deformation through the motion of dislocations, the other is sliding in the
grain boundaries. At the grain sizes studied here the latter dominates, leading
to a softening as the grain size is reduced. This implies that there is an
``optimal'' grain size, where the hardness is maximal.
Since the grain boundaries participate actively in the deformation, it is
interesting to study the effects of introducing impurity atoms in the grain
boundaries. We study how silver atoms in the grain boundaries influence the
mechanical properties of nanocrystalline copper.Comment: 10 pages, LaTeX2e, PS figures and sty files included. To appear in
Mater. Res. Soc. Symp. Proc. vol 538 (invited paper). For related papers, see
http://www.fysik.dtu.dk/~schiotz/publist.htm
Sensitive detection of sodium in a flame using parametric four-wave mixing and seeded parametric four-wave mixing
Two-photon resonant parametric four-wave mixing and a newly developed variant called seeded parametric four-wave mixing are used to detect trace quantities of sodium in a flame. Both techniques are simple, requiring only a single laser to generate a signal beam at a different wavelength which propagates collinearly with the pump beam, allowing efficient signal recovery. A comparison of the two techniques reveals that seeded parametric four-wave mixing is more than two orders of magnitude more sensitive than parametric four-wave mixing, with an estimated detection sensitivity of 5 x 10(9) atoms/cm(3). Seeded parametric four-wave mixing is achieved by cascading two parametric four-wave mixing media such that one of the parametric fields generated in the first high-density medium is then used to seed the same four-wave mixing process in a second medium in order to increase the four-wave mixing gain. The behavior of this seeded parametric four-wave mixing is described using semiclassical perturbation theory. A simplified small-signal theory is found to model most of the data satisfactorily. However, an anomalous saturationlike behavior is observed in the large signal regime. The full perturbation treatment, which includes the competition between two different four-wave mixing processes coupled via the signal field, accounts for this apparently anomalous behavior
Infrared seeded parametric four-wave mixing for sensitive detection of molecules
We have developed a sensitive resonant four-wave mixing technique based on two-photon parametric four-wave mixing with the addition of a phase matched ''seeder'' field. Generation of the seeder field via the same four-wave mixing process in a high pressure cell enables automatic phase matching to be achieved in a low pressure sample cell. This arrangement facilitates sensitive detection of complex molecular spectra by simply tuning the pump laser. We demonstrate the technique with the detection of nitric oxide down to concentrations more than 4 orders of magnitude below the capability of parametric four-wave mixing alone, with an estimated detection threshold of 10(12) molecules/cm(3)
The first Met Office Unified Model-JULES Regional Atmosphere and Land configuration, RAL1
This is the final version. Available on open access from the European Geosciences Union via the DOI in this recordIn this paper we define the first Regional Atmosphere and Land (RAL) science configuration for kilometre-scale modelling using the Unified Model (UM) as the basis for the atmosphere and the Joint UK Land Environment Simulator (JULES) for the land. RAL1 defines the science configuration of the dynamics and physics schemes of the atmosphere and land. This configuration will provide a model baseline for any future weather or climate model developments to be described against, and it is the intention that from this point forward significant changes to the system will be documented in the literature. This reproduces the process used for global configurations of the UM, which was first documented as a science configuration in 2011. While it is our goal to have a single defined configuration of the model that performs effectively in all regions, this has not yet been possible. Currently we define two sub-releases, one for mid-latitudes (RAL1-M) and one for tropical regions (RAL1-T). The differences between RAL1-M and RAL1-T are documented, and where appropriate we define how the model configuration relates to the corresponding configuration of the global forecasting model
Recommended from our members
The DYMECS project: a statistical approach for the evaluation of convective storms in high-resolution NWP models
A new frontier in weather forecasting is emerging by operational forecast models now being run at convection-permitting resolutions at many national weather services. However, this is not a panacea; significant systematic errors remain in the character of convective storms and rainfall distributions. The DYMECS project (Dynamical and Microphysical Evolution of Convective Storms) is taking a fundamentally new approach to evaluate and improve such models: rather than relying on a limited number of cases, which may not be representative, we have gathered a large database of 3D storm structures on 40 convective days using the Chilbolton radar in southern England. We have related these structures to storm life-cycles derived by tracking features in the rainfall from the UK radar network, and compared them statistically to storm structures in the Met Office model, which we ran at horizontal grid length between 1.5 km and 100 m, including simulations with different subgrid mixing length. We also evaluated the scale and intensity of convective updrafts using a new radar technique. We find that the horizontal size of simulated convective storms and the updrafts within them is much too large at 1.5-km resolution, such that the convective mass flux of individual updrafts can be too large by an order of magnitude. The scale of precipitation cores and updrafts decreases steadily with decreasing grid lengths, as does the typical storm lifetime. The 200-m grid-length simulation with standard mixing length performs best over all diagnostics, although a greater mixing length improves the representation of deep convective storms
Recommended from our members
Intercomparison of methods of coupling between convection and large-scale circulation: 1. Comparison over uniform surface conditions
As part of an international intercomparison project, a set of single column models (SCMs) and cloud-resolving models (CRMs) are run under the weak temperature gradient (WTG) method and the damped gravity wave (DGW) method. For each model, the implementation of the WTG or DGW method involves a simulated column which is coupled to a reference state defined with profiles obtained from the same model in radiative-convective equilibrium. The simulated column has the same surface conditions as the reference state and is initialized with profiles from the reference state. We performed systematic comparison of the behavior of different models under a consistent implementation of the WTG method and the DGW method and systematic comparison of the WTG and DGW methods in models with different physics and numerics.
CRMs and SCMs produce a variety of behaviors under both WTG and DGW methods. Some of the models reproduce the reference state while others sustain a large-scale circulation which results in either substantially lower or higher precipitation compared to the value of the reference state. CRMs show a fairly linear relationship between precipitation and circulation strength. SCMs display a wider range of behaviors than CRMs. Some SCMs under the WTG method produce zero precipitation. Within an individual SCM, a DGW simulation and a corresponding WTG simulation can produce different signed circulation.
When initialized with a dry troposphere, DGW simulations always result in a precipitating equilibrium state. The greatest sensitivities to the initial moisture conditions occur for multiple stable equilibria in some WTG simulations, corresponding to either a dry equilibrium state when initialized as dry or a precipitating equilibrium state when initialized as moist. Multiple equilibria are seen in more WTG simulations for higher SST. In some models, the existence of multiple equilibria is sensitive to some parameters in the WTG calculations
- …