IRRIGATION STATION EQUIPMENT FOR PREVENTING THE USE OF LOW WATER QUALITY

In Romania the economically efficient irrigated area is estimated at 3.5 million hectares. On national scale there is nointegrated approach for monitoring the quantity and quality of the irrigation water, using adequate equipment at thepumping station. On international scale, in many countries the pumping stations are provided with equipment formonitoring, on real time, the quality or the pumped water and for warning about critical situations (emergencies).This paper describes a technical solution consisting of equipment which monitors the following parameters of waterpumped in irrigation systems: turbidity, pH, CE at 25 o C, Na+, Cl-. The lapse of time for monitoring is of 10 to 60 min.The main components are the following: the sampling pump (submersible) the monitoring board, the repression pipe ofthe analyzed water. Warnings are made about values exceeding the programmed level for each monitored parameter,about the fact that the pump and agitator do not work or about any other source of damage.The technical solution and equipment were tested at a pumping station which uses water from Danube, in most casesmixed with water originating from drainage. Results showed a reduction of the total content of soluble salts from soiland of their negative impact upon the crops, a reduction of the degree of river alluvial deposits within the irrigationsystem and reduction of the energetic consumption required for pumping

Clinico-etiological and epidemiological particularities of respiratory virus diseases in children in the 2022-2023 season

In the period 2020-2022 as a result of epidemiological measures specific to the COVID-19 pandemic (protective mask, online teaching activity, social distancing) we witnessed a considerable decrease in the number of cases of respiratory viroids in children. With the lifting of prophylactic measures that coincided with the start of physical teaching activities and the onset of the cold season, we have been confronted in pediatric wards with an increase in the incidence of virological infections in the pediatric population. In this article we aim to analyze the particularities of respiratory virological diseases in children in the season 2022 - 2023 both from the etiological and epidemiological point of view and the characteristic clinical forms of the disease. We conducted a retrospective clinical study of cases admitted to the Clinical Departments of Infectious Diseases Pediatrics of the National Institute of Infectious Diseases “Prof. Dr. Matei Bals” in the period October 2022 - March 2023. During this period, we recorded 3.012 cases of respiratory virology in children, which represents the majority of pediatric pathology admitted (72,9 %). The peak incidence of respiratory virology occurred in December (688 cases). From the etiological point of view, most cases were SARS-CoV-2 infections, followed by influenza (predominantly type A), then a smaller number of infections with respiratory syncytial virus (RSV), rhinovirus, adenovirus, metapneumovirus. The most common clinical form of the disease was moderate (66.9%), with severe forms accounting for 10.5%. All pediatric cases of respiratory virology admitted to our wards have evolved favorably, with no deaths

Severe form of COVID-19 in a neonate with resuscitated cardio-respiratory arrest - Case presentation

SARS-CoV-2 infection is usually a self-limiting viral infection in healthy children. Still, it’s effects on the neonatal population remain largely unknown. There has been evidence of adverse events on neonates, mostly consisting in case reports of patients with severe forms of COVID-19 and also recent cohort studied of the pediatric population including the neonatal subgroup. The clinical presentation appears different in the neonatal patients in contrast with older children, and may manifest also as a life-threatening respiratory infection with systemic complications. In this paper we present a clinical case of a premature boy with a corrected age of 40 weeks at admission to the Pediatric Infectious Diseases Clinical Department IX of the National Institute of Infectious Diseases “Prof. Dr. Matei Bals” with the diagnosis of SARS-CoV-2 infection. The positive diagnosis was established on suggestive clinical picture (fever, dry couch, rhinorrhea, loose stools and inappetence) and confirmed by SARS-CoV-2 rapid antigen test. Laboratory investigations at admission showed only moderate to severe anemia, mild inflammatory syndrome and a mild neonatal hyperbilirubinemia, with normal leukocyte count, normal glycaemia, ionogram and blood gases. Chest x-ray showed moderate interstitial pneumonia. In the second day of admission, after 24h of favorable evolution, with no fever and present appetite, he suddenly presented during defecation a presumptive vasovagal syndrome, with general hypotonia and a short period of desaturation. Laboratory investigations made during the episode showed normal glycaemia, normal ionogram, normal blood gases, moderate-severe anemia and important metabolic acidosis. A new chest x-ray showed evolution of the interstitial pneumonia. We did a blood transfusion and continued antiviral treatment, antibiotic treatment and perfusions. He maintained normal pulmonary and cardiac function for another 6 hours, after which he presented a tonic-clonic seizure and after administration of intrarectal benzodiazepines he presented cardio-pulmonary arrest. He was resuscitated, intubated and sedated and transfer to a children ICU. 2 weeks later after admission in the ICU he was discharged with favorable outcome. The case presented shows that although SARS-CoV-2 infection is often a mild condition in children, COVID-19 in neonates can have an unpredicted course. Rapid evolution to sever forms can be a possible disease outcome. Preterm birth with associated complications like bronchopulmonary dysplasia or anemia, can predispose to sever evolution of the disease, and this child must be kept safe. There is also a neurotropic potential of the SARS-CoV-2 virus that has to be followed

European aerosol phenomenology - 8 : Harmonised source apportionment of organic aerosol using 22 Year-long ACSM/AMS datasets

Organic aerosol (OA) is a key component of total submicron particulate matter (PM1), and comprehensive knowledge of OA sources across Europe is crucial to mitigate PM1 levels. Europe has a well-established air quality research infrastructure from which yearlong datasets using 21 aerosol chemical speciation monitors (ACSMs) and 1 aerosol mass spectrometer (AMS) were gathered during 2013-2019. It includes 9 non-urban and 13 urban sites. This study developed a state-of-the-art source apportionment protocol to analyse long-term OA mass spectrum data by applying the most advanced source apportionment strategies (i.e., rolling PMF, ME-2, and bootstrap). This harmonised protocol was followed strictly for all 22 datasets, making the source apportionment results more comparable. In addition, it enables quantification of the most common OA components such as hydrocarbon-like OA (HOA), biomass burning OA (BBOA), cooking-like OA (COA), more oxidised-oxygenated OA (MO-OOA), and less oxidised-oxygenated OA (LO-OOA). Other components such as coal combustion OA (CCOA), solid fuel OA (SFOA: mainly mixture of coal and peat combustion), cigarette smoke OA (CSOA), sea salt (mostly inorganic but part of the OA mass spectrum), coffee OA, and ship industry OA could also be separated at a few specific sites. Oxygenated OA (OOA) components make up most of the submicron OA mass (average = 71.1%, range from 43.7 to 100%). Solid fuel combustion-related OA components (i.e., BBOA, CCOA, and SFOA) are still considerable with in total 16.0% yearly contribution to the OA, yet mainly during winter months (21.4%). Overall, this comprehensive protocol works effectively across all sites governed by different sources and generates robust and consistent source apportionment results. Our work presents a comprehensive overview of OA sources in Europe with a unique combination of high time resolution (30-240 min) and long-term data coverage (9-36 months), providing essential information to improve/validate air quality, health impact, and climate models.Peer reviewe

The Science Performance of JWST as Characterized in Commissioning

This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries for which it was built. Moreover, almost across the board, the science performance of JWST is better than expected; in most cases, JWST will go deeper faster than expected. The telescope and instrument suite have demonstrated the sensitivity, stability, image quality, and spectral range that are necessary to transform our understanding of the cosmos through observations spanning from near-earth asteroids to the most distant galaxies.Comment: 5th version as accepted to PASP; 31 pages, 18 figures; https://iopscience.iop.org/article/10.1088/1538-3873/acb29

Magnetocapacitance in La0.7Sr0.3MnO3/Pb(Zr0.2Ti0.8)O3/La0.7Sr0.3MnO3 multiferroic heterostructures

Measurements of the magnetocapacitance effect in epitaxial La0.7Sr0.3MnO3/Pb(Zr0.2Ti0.8)O3/La0.7Sr0.3MnO3 heterostructures have been performed using a quasi-static method. Through capacitance-voltage measurements carried out under variable magnetic field it has been found that the magneto-capacitance depends on the orientation of the ferroelectric polarization. The value of magneto-capacitance can be as high as 1% in the voltage range near the ferroelectric coercive field. This has been attributed to a variation of the apparent built-in voltage of the PZT-LSMO Schottky barriers on applied magnetic field

Outstanding Sorption of Copper (II) Ions on Porous Phenothiazine-Imine-Chitosan Materials

The aim of this work was to investigate the ability of a solid-state material, prepared by crosslinking chitosan with a phenothiazine-based aldehyde, to remove copper (II) ions from aqueous solutions, in a fast and selective manner. The metal uptake experiments, including the retention, sensibility, and selectivity against eight different metal ions, were realized via batch adsorption studies. The capacity of the material to retain copper (II) ions was investigated by spectrophotometric measurements, using poly(ethyleneimine) complexation agent, which allowed detection in a concentration range of 5–500 µM. The forces driving the copper sorption were monitored using various methods, such as FTIR spectroscopy, X-ray diffraction, SEM-EDAX technique, and optical polarized microscopy, and the adsorption kinetics were assessed by fitting the in vitro sorption data on different mathematical models. The phenothiazine-imine-chitosan material proved high ability to recover copper from aqueous media, reaching a maximum retention capacity of 4.394 g Cu (II)/g adsorbent when using a 0.5 M copper solution, which is an outstanding value compared to other chitosan-based materials reported in the literature to this date. It was concluded that the high ability of the studied xerogel to retain Cu (II) ions was the result of both physio- and chemo-sorption processes. This particular behavior was favored on one hand by the porous nature of the material and on the other hand by the presence of amine, hydroxyl, imine, and amide groups with the role of copper ligands

Phenothiazine-Based Dyes in Solar Cell Technology

Phenothiazine is a fused heterocyclic ring with strong electron-donating character which makes it an important building block for designing organic materials for solar cells applications. The present paper reviews the most recent achievements of phenothiazine-based compounds as dyes in solar cells, with special emphasis on the structure – performance relationship