331 research outputs found

    Influencia de los métodos de conservación en las actividades enzimáticas de suelos forestales mediterráneos

    Get PDF
    Soil storage method may alter enzymatic activity being storage conditions of the soil samples prior to analysis decisive for the results. Studies made on freshly collected soils are generally preferred. However it is always not possible due to practical reasons since for example sampling is often restricted to short period of the year or because a great quantity of microbiological analyses must be made on time and by few people. On this context, soil storage methods are needed, being cold at 4°C the most widely used although sometimes alternative storage methods are also utilized. The aim of this study is to evaluate the effect of two alternative storage methods of soil samples (freezing at –20°C and air drying conservation methods) in comparison to cold at 4°C on the enzymatic activities (dehydrogenase, phosphatase, β-glucosidase and urease soil enzymes). Samples of two forest ecosystems (pine and holm oak forest stand) were taken in two different season of the year (winter and spring 2009). Results showed that enzymatic activities differed when freezing or air drying conservation methods were used in comparison with cold soil samples. Generally, alternative soil storage methods presented lower enzymatic activity than cold at 4°C. However, these changes depend on season and sampling location.El método de conservación del suelo utilizado puede alterar la actividad enzimática, siendo decisivas para los resultados, las condiciones de conservación previas a los análisis. Para los estudios es preferible realizar los análisis en muestras frescas y recién cogidas. Sin embargo, esto no es siempre posible por razones prácticas ya que las muestras se tienen que recoger en un corto periodo del año o porque los análisis los debe hacer poca gente y siempre en un determinado tiempo. En este contexto, se necesita un método de conservación, siendo el mantenimiento en el frigorífico a 4°C el método más usado, aunque existen otros métodos alternativos. El objetivo de este trabajo es el de evaluar el efecto de dos métodos alternativos de conservación (congelado a –20°C y secado a temperatura ambiente) sobre las actividades enzimáticas (deshidrogenasa, fosfatasa, β-glucosidasa y ureasa), en comparación con el mantenido en el frigorífico a 4°C. Las muestras se obtuvieron de dos zonas forestales diferentes (pinar y encinar) y en dos épocas distintas (primavera y verano de 2009). Los resultados mostraron diferencias en las actividades enzimáticas cuando se usó el congelado o secado al aire de las muestras de suelo en comparación con el mantenimiento en el frigorífico. De forma general, los métodos de conservación alternativos mostraron una menor actividad enzimática en las muestras de suelo analizadas. Sin embargo, estos cambios dependen de la época del año y la zona de muestreo

    Multidifferential study of identified charged hadron distributions in ZZ-tagged jets in proton-proton collisions at s=\sqrt{s}=13 TeV

    Full text link
    Jet fragmentation functions are measured for the first time in proton-proton collisions for charged pions, kaons, and protons within jets recoiling against a ZZ boson. The charged-hadron distributions are studied longitudinally and transversely to the jet direction for jets with transverse momentum 20 <pT<100< p_{\textrm{T}} < 100 GeV and in the pseudorapidity range 2.5<η<42.5 < \eta < 4. The data sample was collected with the LHCb experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 1.64 fb1^{-1}. Triple differential distributions as a function of the hadron longitudinal momentum fraction, hadron transverse momentum, and jet transverse momentum are also measured for the first time. This helps constrain transverse-momentum-dependent fragmentation functions. Differences in the shapes and magnitudes of the measured distributions for the different hadron species provide insights into the hadronization process for jets predominantly initiated by light quarks.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-013.html (LHCb public pages

    Study of the BΛc+ΛˉcKB^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} decay

    Full text link
    The decay BΛc+ΛˉcKB^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} is studied in proton-proton collisions at a center-of-mass energy of s=13\sqrt{s}=13 TeV using data corresponding to an integrated luminosity of 5 fb1\mathrm{fb}^{-1} collected by the LHCb experiment. In the Λc+K\Lambda_{c}^+ K^{-} system, the Ξc(2930)0\Xi_{c}(2930)^{0} state observed at the BaBar and Belle experiments is resolved into two narrower states, Ξc(2923)0\Xi_{c}(2923)^{0} and Ξc(2939)0\Xi_{c}(2939)^{0}, whose masses and widths are measured to be m(Ξc(2923)0)=2924.5±0.4±1.1MeV,m(Ξc(2939)0)=2938.5±0.9±2.3MeV,Γ(Ξc(2923)0)=0004.8±0.9±1.5MeV,Γ(Ξc(2939)0)=0011.0±1.9±7.5MeV, m(\Xi_{c}(2923)^{0}) = 2924.5 \pm 0.4 \pm 1.1 \,\mathrm{MeV}, \\ m(\Xi_{c}(2939)^{0}) = 2938.5 \pm 0.9 \pm 2.3 \,\mathrm{MeV}, \\ \Gamma(\Xi_{c}(2923)^{0}) = \phantom{000}4.8 \pm 0.9 \pm 1.5 \,\mathrm{MeV},\\ \Gamma(\Xi_{c}(2939)^{0}) = \phantom{00}11.0 \pm 1.9 \pm 7.5 \,\mathrm{MeV}, where the first uncertainties are statistical and the second systematic. The results are consistent with a previous LHCb measurement using a prompt Λc+K\Lambda_{c}^{+} K^{-} sample. Evidence of a new Ξc(2880)0\Xi_{c}(2880)^{0} state is found with a local significance of 3.8σ3.8\,\sigma, whose mass and width are measured to be 2881.8±3.1±8.5MeV2881.8 \pm 3.1 \pm 8.5\,\mathrm{MeV} and 12.4±5.3±5.8MeV12.4 \pm 5.3 \pm 5.8 \,\mathrm{MeV}, respectively. In addition, evidence of a new decay mode Ξc(2790)0Λc+K\Xi_{c}(2790)^{0} \to \Lambda_{c}^{+} K^{-} is found with a significance of 3.7σ3.7\,\sigma. The relative branching fraction of BΛc+ΛˉcKB^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} with respect to the BD+DKB^{-} \to D^{+} D^{-} K^{-} decay is measured to be 2.36±0.11±0.22±0.252.36 \pm 0.11 \pm 0.22 \pm 0.25, where the first uncertainty is statistical, the second systematic and the third originates from the branching fractions of charm hadron decays.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-028.html (LHCb public pages

    Measurement of the ratios of branching fractions R(D)\mathcal{R}(D^{*}) and R(D0)\mathcal{R}(D^{0})

    Full text link
    The ratios of branching fractions R(D)B(BˉDτνˉτ)/B(BˉDμνˉμ)\mathcal{R}(D^{*})\equiv\mathcal{B}(\bar{B}\to D^{*}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(\bar{B}\to D^{*}\mu^{-}\bar{\nu}_{\mu}) and R(D0)B(BD0τνˉτ)/B(BD0μνˉμ)\mathcal{R}(D^{0})\equiv\mathcal{B}(B^{-}\to D^{0}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(B^{-}\to D^{0}\mu^{-}\bar{\nu}_{\mu}) are measured, assuming isospin symmetry, using a sample of proton-proton collision data corresponding to 3.0 fb1{ }^{-1} of integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The tau lepton is identified in the decay mode τμντνˉμ\tau^{-}\to\mu^{-}\nu_{\tau}\bar{\nu}_{\mu}. The measured values are R(D)=0.281±0.018±0.024\mathcal{R}(D^{*})=0.281\pm0.018\pm0.024 and R(D0)=0.441±0.060±0.066\mathcal{R}(D^{0})=0.441\pm0.060\pm0.066, where the first uncertainty is statistical and the second is systematic. The correlation between these measurements is ρ=0.43\rho=-0.43. Results are consistent with the current average of these quantities and are at a combined 1.9 standard deviations from the predictions based on lepton flavor universality in the Standard Model.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-039.html (LHCb public pages

    Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

    Get PDF
    Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

    "Painopeiton kaveriksi" : Painopeitto kehitysvammaisen rentoutumiseen toimintaterapiassa

    Get PDF
    Tämä on toiminnallinen opinnäytetyö, jonka tarkoituksena oli valmistaa painopeitto sekä löytää perusteet painopeiton käytön hyödyllisyyteen kehitysvammaiselle. Lisäksi painopeiton valmistamisesta tuotettiin kuvallinen vaiheittain etenevä ohjeistus. Painopeiton valmistus toteutettiin etelä-pohjanmaalla sijaitsevan Lehtimäen erityiskansanopiston toimintaterapiaan. Lehtimäen erityiskansanopisto on erityistä tukea ja ohjausta tarvitsevien henkilöiden oppilaitos. Tässä opinnäytetyössä tuodaan esille rentoutuminen osana ihmiselle merkityksellistä toimintaa, jonka viitekehyksenä on käytetty Kanadalaisen toiminnallisuuden ja sitoutumisen mallia, Canadian Model of Occupational Performance and Engagement, (CMOP-E). Rentoutumista mahdollistaa taktiiliset- ja proprioseptiviset aistimukset, jotka perustellaan sensorisen integraation teorian kautta. Painopeiton avulla kehitysvammaiselle voidaan tarjota taktilisia- ja proprioseptiivisia aistimuksia.The purpose of this functional thesis was to manufacture a weighted blanket and to find a basis for its usefulness for a mentally disabled patient. In addition, step by step visual instructions for the making of a weighted blanket were produced. The weighted blanket was made for the occupational therapy conducted at the Lehtimäki Special Folk High School located in Southern Ostrobothnia. The Lehtimäki Special Folk High School is an institution which caters for individuals in need of special support and guidance. This thesis raises relaxation as an important aspect of a person’s activities. Its theoretical basis originates from the Canadian Model of Occupational Performance and Engagement, (CMOP-E). Relaxation allows tactile and proprioceptive sensations which are justified by using the sensory integration theory. With the help of a weighted blanket, a mentally disabled person can be offered tactile and proprioceptive sensations

    Adsorption properties of β- and hydroxypropyl-β-cyclodextrins cross-linked with epichlorohydrin in aqueous solution. A sustainable recycling strategy in textile dyeing process

    No full text
    β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD) were used to prepare insoluble polymers using epichlorohydrin as a cross-linking agent and the azo dye Direct Red 83:1 was used as target adsorbate. The preliminary study related to adsorbent dosage, pH, agitation or dye concentration allowed us to select the best conditions to carry out the rest of experiments. The kinetics was evaluated by Elovich, pseudo first order, pseudo second order, and intra-particle diffusion models. The results indicated that the pseudo second order model presented the best fit to the experimental data, indicating that chemisorption is controlling the process. The results were also evaluated by Freundlich, Langmuir and Temkin isotherms. According to the determination coefficient (R 2 ), Freunlich gave the best results, which indicates that the adsorption process is happening on heterogeneous surfaces. One interesting parameter obtained from Langmuir isotherm is q max (maximum adsorption capacity). This value was six times higher when a β-CDs-EPI polymer was employed. The cross-linked polymers were fully characterized by nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). Also, morphology and particle size distribution were both assessed. Under optimized conditions, the β-CDs-EPI polymer seems to be a useful device for removing Direct Red 83:1 (close 90%), from aqueous solutions and industrial effluents. Complementarily, non-adsorbed dye was photolyzed by a pulsed light driven advanced oxidation process. The proposed methodology is environmental and economically advantageous, considering the point of view of a sustainable recycling economy in the textile dyeing process
    corecore