Desempenho do Modelo CATT-BRAMS em simulações de transporte de poluentes emitidos por incêndios florestais

Ponencia presentada en: XXX Jornadas Científicas de la AME y el IX Encuentro Hispano Luso de Meteorología celebrado en Zaragoza, del 5 al 7 de mayo de 2008.[PT]O objectivo deste trabalho foi avaliar o comportamento do modelo CATT-BRAMS para o transporte atmosférico do monóxido de carbono (CO) e material particulado (PM2.5) emitidos por queimadas diante de uma situação considerada normal (2002) em relação aos incêndios que ocorreram em 2003, considerada uma das mais intensas temporadas de incêndio durante as últimas décadas. As condições iniciais e de contorno foram feitas utilizando as análises do modelo global AVN/NCEP (Aviation run of the National Centers for Environmental Prediction Global Spectral Model) e com a assimilação dos dados de fogos derivados a partir dos productos MODIS/AQUA para a Europa, com o objectivo de identificar as posições das emissões.[EN]The objective of this work was to evaluate the behaviour of the CATT-BRAMS model for the atmospheric transport of the carbon monoxide (CO) and particulate matter (PM2.5) emitted by burning due to a situation considered normal (2002) in relation to the fires that happened in 2003, considered one of the most intense fire seasons during the last decade.. The initial and lateral boundary conditions were provided by the analyses of the global model AVN/NCEP (Aviation run of the National Centers Environmental Global Prediction Spectral Model) and the assimilation of fire data derived from the products MODIS/AQUA to Europe, with the objective of identifying the emissions location

Modelling the Radiative Effects of Biomass Burning Aerosols on Carbon Fluxes in the Amazon Region

Every year, a dense smoke haze covers a large portion of South America originating from fires in the Amazon Basin and central parts of Brazil during the dry/biomass-burning season between August and October. Over a large portion of South America, the average aerosol optical depth at 550 nm exceeds 1.0 during the fire season while the background value during the rainy season is below 0.2. Biomass burning aerosol particles increase scattering and absorption of the incident solar radiation. The regional-scale aerosol layer reduces the amount of solar energy reaching the surface, cools the near surface air, and increases the diffuse radiation fraction over a large disturbed area of the Amazon rainforest. These factors affect the energy and CO2 fluxes at the surface. In this work, we applied a fully integrated atmospheric model to assess the impact of biomass burning aerosols in CO2 fluxes in the Amazon region during 2010. We address the effects of the attenuation of the global solar radiation and the enhancement of the diffuse solar radiation flux inside the vegetation canopy. Our results indicate that the biomass burning aerosols led to increases of about 27% of gross primary productivity of Amazonia, 10% of plant respiration and a decline in soil respiration of 3%. Consequently, in our model Amazonia, became a net carbon sink; net ecosystem exchange during September 2010 dropped from +101 to -104 TgC when the aerosol effects are considered, mainly due to the aerosol diffuse radiation effect. For the forest biome, our results point to a dominance of the diffuse radiation effect on CO2 fluxes, reaching a balance of 50% - 50% between the diffuse and direct aerosol effects for high aerosol loads. For C3 grasses and Savanna (cerrado), as expected, the contribution of the diffuse radiation effect is much lower, tending to zero with the increase of aerosol load. Taking all biomes together, our model shows the Amazon during the dry season, in the presence of high biomass burning aerosol loads, changing from being a source to being a sink of CO2 to the atmosphere

Simulaçao numérica da dispersao de poluentes emitidos por incendios no verao de 2003 na Peninsula Ibérica

Ponencia presentada en: XXIX Jornadas Científicas de la AME y el VII Encuentro Hispano Luso de Meteorología celebrado en Pamplona, del 24 al 26 de abril de 2006.[PT]O objectivo deste trabalho é utilizar o modelo CATT-B-RAMS (Coupled Aerosol and Tracers Transport model to the Brazilian Regional Atmospheric Modeling System) para estudar o transporte atmosférico do monóxido de carbono (CO) e material particulado (PM2.5) emitidos por queimadas que ocorreram durante o Verão de 2003 na Península Ibérica, no período de 31 de Julho a 3 de Agosto com a situação sinóptica actuante na exportação destes poluentes. As simulações numéricas foram feitas com a assimilação dos dados de fogos derivados a partir de medidas do MODIS/AQUA para a Europa para implementar a posição da emissão. Para a caracterização do estado inicial do modelo foram usadas as análises do modelo global AVN/NCEP (Aviation run of the National Center for Environmental Prediction Global Spectral Model) com grade de resolução de 80 km. Os resultados indicam que o modelo de mesoescala pode ser uma boa ferramenta para descrever a circulação atmosférica reproduzindo as principais características da situação sinóptica e o entendimento e avaliação deste impacto, passam necessariamente, pela junção de estudos observacionais e modelação numérica gerando modelos complexos que descrevam as inter-relações biosfera-atmosfera, caracterizando um estudo multidisciplinar.[EN]This study presents the transport of gases and particulate emitted by large scale vegetation fires that took place in the Iberian Peninsula in summer of 2003. This study is carried out through a numerical simulation using a highresolution configuration of the 3-D transport model CATT-BRAMS (Coupled Aerosol and Tracer Transport to the Brazilian developments on the Regional Atmospheric Modeling System) coupled to a biomass burning emission model. The sources emission from biomass burning for carbon monoxide (CO) and particulate material (PM2.5) are defined using MODIS/TERRA fire product and local observations. The initial and lateral boundary conditions necessary to drive model were provided by the Aviation run of the National Center for Environmental Prediction Global Spectral Model (AVN/NCEP). The coarse grid resolution was defined with 80 km grid spacing. The results show that the mesoscale model can be used as a useful tool to describe the atmospheric circulation reproducing the main characteristics of the synoptic situation and how it controls the pollution transport

The Brazilian Developments on the Regional Atmospheric Modeling System (BRAMS 5.2): An Integrated Environmental Model Tuned for Tropical Areas

We present a new version of the Brazilian developments on the Regional Atmospheric Modeling System where different previous versions for weather, chemistry and carbon cycle were unified in a single integrated software system. The new version also has a new set of state-of-the-art physical parameterizations and greater computational parallel and memory usage efficiency. Together with the description of the main features are examples of the quality of the transport scheme for scalars, radiative fluxes on surface and model simulation of rainfall systems over South America in different spatial resolutions using a scale-aware convective parameterization. Besides, the simulation of the diurnal cycle of the convection and carbon dioxide concentration over the Amazon Basin, as well as carbon dioxide fluxes from biogenic processes over a large portion of South America are shown. Atmospheric chemistry examples present model performance in simulating near-surface carbon monoxide and ozone in Amazon Basin and Rio de Janeiro megacity. For tracer transport and dispersion, it is demonstrated the model capabilities to simulate the volcanic ash 3-d redistribution associated with the eruption of a Chilean volcano. Then, the gain of computational efficiency is described with some details. BRAMS has been applied for research and operational forecasting mainly in South America. Model results from the operational weather forecast of BRAMS on 5 km grid spacing in the Center for Weather Forecasting and Climate Studies, INPE/Brazil, since 2013 are used to quantify the model skill of near surface variables and rainfall. The scores show the reliability of BRAMS for the tropical and subtropical areas of South America. Requirements for keeping this modeling system competitive regarding on its functionalities and skills are discussed. At last, we highlight the relevant contribution of this work on the building up of a South American community of model developers

The Brazilian developments on the Regional Atmospheric Modeling System (BRAMS 5.2): an integrated environmental model tuned for tropical areas

We present a new version of the Brazilian developments on the Regional Atmospheric Modeling System (BRAMS), in which different previous versions for weather, chemistry, and carbon cycle were unified in a single integrated modeling system software. This new version also has a new set of state-of-the-art physical parameterizations and greater computational parallel and memory usage efficiency. The description of the main model features includes several examples illustrating the quality of the transport scheme for scalars, radiative fluxes on surface, and model simulation of rainfall systems over South America at different spatial resolutions using a scale aware convective parameterization. Additionally, the simulation of the diurnal cycle of the convection and carbon dioxide concentration over the Amazon Basin, as well as carbon dioxide fluxes from biogenic processes over a large portion of South America, are shown. Atmospheric chemistry examples show the model performance in simulating near-surface carbon monoxide and ozone in the Amazon Basin and the megacity of Rio de Janeiro. For tracer transport and dispersion, the model capabilities to simulate the volcanic ash 3-D redistribution associated with the eruption of a Chilean volcano are demonstrated. The gain of computational efficiency is described in some detail. BRAMS has been applied for research and operational forecasting mainly in South America. Model results from the operational weather forecast of BRAMS on 5 km grid spacing in the Center for Weather Forecasting and Climate Studies, INPE/Brazil, since 2013 are used to quantify the model skill of near-surface variables and rainfall. The scores show the reliability of BRAMS for the tropical and subtropical areas of South America. Requirements for keeping this modeling system competitive regarding both its functionalities and skills are discussed. Finally, we highlight the relevant contribution of this work to building a South American community of model developers.CNPqFAPESPEarth System Research Laboratory at the National Oceanic and Atmospheric Administration (ESRL/NOAA), Boulder, USAInst Nacl Pesquisas Espaciais, Ctr Previsao Tempo & Estudos Climat, Cachoeira Paulista, SP, BrazilDiv Ciência da Computação, Instituto Tecnológico de Aeronáutica, São José dos Campos, SP, BrazilUniv Estadual Paulista Unesp, Fac Ciencias, Bauru, SP, BrazilCtr Meteorol Bauru IPMet, Bauru, SP, BrazilUniv Fed Sao Paulo, Dept Ciencias Ambientais, Diadema, SP, BrazilUniv Sao Paulo, Inst Astron Geofis & Ciencias Atmosfer, Sao Paulo, SP, BrazilUniv Fed Campina Grande, Dept Ciencias Atmosfer, Campina Grande, PB, BrazilEmbrapa Informat Agr, Campinas, SP, BrazilUniv Fed Sao Paulo, Inst Ciencia & Tecnol, Sao Jose Dos Campos, SP, BrazilUniv Fed Rio Grande do Norte, Dept Ciencias Atmosfer & Climat, Programa Pos Grad Ciencias Climat, Natal, RN, BrazilInst Nacl Pesquisas Espaciais, Ctr Ciencias Sistema, Sao Jose Dos Campos, SP, BrazilUniv Fed Sao Joao Del Rei, Dept Geociencias, Sao Joao Del Rei, MG, BrazilInst Nacl Pesquisas Espaciais, Lab Associado Computacao & Matemat Aplica, Sao Jose Dos Campos, BrazilUniv Evora, Inst Ciencias Agr & Ambientais Mediterr, Evora, PortugalUniv Lusofona Humanidades & Tecnol, Ctr Interdisciplinar Desenvolvimento Ambient Gest, Lisbon, PortugalUniv Fed Pelotas, Fac Meteorol, Pelotas, RS, BrazilUnive Tecnol Fed Parana, Londrina, PR, BrazilNASA, Goddard Space Flight Ctr, Univ Space Res Assoc, Goddard Earth Sci Technol & Res Global Modeling &, Greenbelt, MD USAUniv Fed Sao Paulo, Inst Ciencia & Tecnol, Sao Jose Dos Campos, SP, BrazilUniv Fed Sao Paulo, Inst Ciencia & Tecnol, Sao Jose Dos Campos, SP, BrazilCNPq: 306340/2011-9FAPESP: 2014/01563-1FAPESP: 2015/10206-0FAPESP: 2014/01564-8Web of Scienc

On the differences in the vertical distribution of modeled aerosol optical depth over the southeastern Atlantic

The southeastern Atlantic is home to an expansive smoke aerosol plume overlying a large cloud deck for approximately a third of the year. The aerosol plume is mainly attributed to the extensive biomass burning activities that occur in southern Africa. Current Earth system models (ESMs) reveal significant differences in their estimates of regional aerosol radiative effects over this region. Such large differences partially stem from uncertainties in the vertical distribution of aerosols in the troposphere. These uncertainties translate into different aerosol optical depths (AODs) in the planetary boundary layer (PBL) and the free troposphere (FT). This study examines differences of AOD fraction in the FT and AOD differences among ESMs (WRF-CAM5, WRF-FINN, GEOS-Chem, EAM-E3SM, ALADIN, GEOS-FP, and MERRA-2) and aircraft-based measurements from the NASA ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) field campaign. Models frequently define the PBL as the well-mixed surface-based layer, but this definition misses the upper parts of decoupled PBLs, in which most low-level clouds occur. To account for the presence of decoupled boundary layers in the models, the height of maximum vertical gradient of specific humidity profiles from each model is used to define PBL heights. Results indicate that the monthly mean contribution of AOD in the FT to the total-column AOD ranges from 44 % to 74 % in September 2016 and from 54 % to 71 % in August 2017 within the region bounded by 25∘ S–0∘ N–S and 15∘ W–15∘ E (excluding land) among the ESMs. ALADIN and GEOS-Chem show similar aerosol plume patterns to a derived above-cloud aerosol product from the Moderate Resolution Imaging Spectroradiometer (MODIS) during September 2016, but none of the models show a similar above-cloud plume pattern to MODIS in August 2017. Using the second-generation High Spectral Resolution Lidar (HSRL-2) to derive an aircraft-based constraint on the AOD and the fractional AOD, we found that WRF-CAM5 produces 40 % less AOD than those from the HSRL-2 measurements, but it performs well at separating AOD fraction between the FT and the PBL. AOD fractions in the FT for GEOS-Chem and EAM-E3SM are, respectively, 10 % and 15 % lower than the AOD fractions from the HSRL-2. Their similar mean AODs reflect a cancellation of high and low AOD biases. Compared with aircraft-based observations, GEOS-FP, MERRA-2, and ALADIN produce 24 %–36 % less AOD and tend to misplace more aerosols in the PBL. The models generally underestimate AODs for measured AODs that are above 0.8, indicating their limitations at reproducing high AODs. The differences in the absolute AOD, FT AOD, and the vertical apportioning of AOD in different models highlight the need to continue improving the accuracy of modeled AOD distributions. These differences affect the sign and magnitude of the net aerosol radiative forcing, especially when aerosols are in contact with clouds.</p

Airborne observations reveal elevational gradient in tropical forest isoprene emissions

Isoprene dominates global non-methane volatile organic compound emissions, and impacts tropospheric chemistry by influencing oxidants and aerosols. Isoprene emission rates vary over several orders of magnitude for different plants, and characterizing this immense biological chemodiversity is a challenge for estimating isoprene emission from tropical forests. Here we present the isoprene emission estimates from aircraft eddy covariance measurements over the Amazonian forest. We report isoprene emission rates that are three times higher than satellite top-down estimates and 35% higher than model predictions. The results reveal strong correlations between observed isoprene emission rates and terrain elevations, which are confirmed by similar correlations between satellite-derived isoprene emissions and terrain elevations. We propose that the elevational gradient in the Amazonian forest isoprene emission capacity is determined by plant species distributions and can substantially explain isoprene emission variability in tropical forests, and use a model to demonstrate the resulting impacts on regional air quality

An overview of the Amazonian Aerosol Characterization Experiment 2008 (AMAZE-08)

The Amazon Basin provides an excellent environment for studying the sources, transformations, and properties of natural aerosol particles and the resulting links between biological processes and climate. With this framework in mind, the Amazonian Aerosol Characterization Experiment (AMAZE-08), carried out from 7 February to 14 March 2008 during the wet season in the central Amazon Basin, sought to understand the formation, transformations, and cloud-forming properties of fine- and coarse-mode biogenic aerosol particles, especially as related to their effects on cloud activation and regional climate. Special foci included (1) the production mechanisms of secondary organic components at a pristine continental site, including the factors regulating their temporal variability, and (2) predicting and understanding the cloud-forming properties of biogenic particles at such a site. In this overview paper, the field site and the instrumentation employed during the campaign are introduced. Observations and findings are reported, including the large-scale context for the campaign, especially as provided by satellite observations. New findings presented include: (i) a particle number-diameter distribution from 10 nm to 10 Î1/4m that is representative of the pristine tropical rain forest and recommended for model use; (ii) the absence of substantial quantities of primary biological particles in the submicron mode as evidenced by mass spectral characterization; (iii) the large-scale production of secondary organic material; (iv) insights into the chemical and physical properties of the particles as revealed by thermodenuder-induced changes in the particle number-diameter distributions and mass spectra; and (v) comparisons of ground-based predictions and satellite-based observations of hydrometeor phase in clouds. A main finding of AMAZE-08 is the dominance of secondary organic material as particle components. The results presented here provide mechanistic insight and quantitative parameters that can serve to increase the accuracy of models of the formation, transformations, and cloud-forming properties of biogenic natural aerosol particles, especially as related to their effects on cloud activation and regional climate. © 2010 Author(s)

Combined searches for the production of supersymmetric top quark partners in proton-proton collisions at root s=13 TeV

A combination of searches for top squark pair production using proton-proton collision data at a center-of-mass energy of 13 TeV at the CERN LHC, corresponding to an integrated luminosity of 137 fb(-1) collected by the CMS experiment, is presented. Signatures with at least 2 jets and large missing transverse momentum are categorized into events with 0, 1, or 2 leptons. New results for regions of parameter space where the kinematical properties of top squark pair production and top quark pair production are very similar are presented. Depending on themodel, the combined result excludes a top squarkmass up to 1325 GeV for amassless neutralino, and a neutralinomass up to 700 GeV for a top squarkmass of 1150 GeV. Top squarks with masses from 145 to 295 GeV, for neutralino masses from 0 to 100 GeV, with a mass difference between the top squark and the neutralino in a window of 30 GeV around the mass of the top quark, are excluded for the first time with CMS data. The results of theses searches are also interpreted in an alternative signal model of dark matter production via a spin-0 mediator in association with a top quark pair. Upper limits are set on the cross section for mediator particle masses of up to 420 GeV