Measurements and Monte-Carlo simulations of the particle self-shielding effect of B4C grains in neutron shielding concrete

A combined measurement and Monte-Carlo simulation study was carried out in order to characterize the particle self-shielding effect of B4C grains in neutron shielding concrete. Several batches of a specialized neutron shielding concrete, with varying B4C grain sizes, were exposed to a 2 {\AA} neutron beam at the R2D2 test beamline at the Institute for Energy Technology located in Kjeller, Norway. The direct and scattered neutrons were detected with a neutron detector placed behind the concrete blocks and the results were compared to Geant4 simulations. The particle self-shielding effect was included in the Geant4 simulations by calculating effective neutron cross-sections during the Monte-Carlo simulation process. It is shown that this method well reproduces the measured results. Our results show that shielding calculations for low-energy neutrons using such materials would lead to an underestimate of the shielding required for a certain design scenario if the particle self-shielding effect is not included in the calculations.Comment: This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0

Formation of PAHs and Carbonaceous Solids in Gas-Phase Condensation Experiments

Carbonaceous grains represent a major component of cosmic dust. In order to understand their formation pathways, they have been prepared in the laboratory by gas-phase condensation reactions such as laser pyrolysis and laser ablation. Our studies demonstrate that the temperature in the condensation zone determines the formation pathway of carbonaceous particles. At temperatures lower than 1700 K, the condensation by-products are mainly polycyclic aromatic hydrocarbons (PAHs), that are also the precursors or building blocks for the condensing soot grains. The low-temperature condensates contain PAH mixtures that are mainly composed of volatile 3-5 ring systems. At condensation temperatures higher than 3500 K, fullerene-like carbon grains and fullerene compounds are formed. Fullerene fragments or complete fullerenes equip the nucleating particles. Fullerenes can be identified as soluble components. Consequently, condensation products in cool and hot astrophysical environments such as cool and hot AGB stars or Wolf Rayet stars should be different and should have distinct spectral properties.Comment: 7 pages, 5 figure

3D silicon detectors for neutron imaging applications

publishedVersio

3D silicon detectors for neutron imaging applications

Neutron detection is of great importance in many fields spanning from scientific research, to nuclear science, and to medical application. The development of silicon-based neutron detectors with enhanced neutron detection efficiency can offer several advantages such as spatial resolution, enhanced dynamic range and background discrimination. In this work, increased detection efficiency is pursued by fabricating high aspect ratio 3D micro-structures filled with neutron converting materials (B4C) on planar silicon detectors. An in-depth feasibility study was carried out in all aspects of the sensor fabrication technology. Passivation of the etched structures was studied in detail, to ensure good electrical performance. The conformal deposition of B4C with a newly developed process showed excellent results. Preliminary electrical characterisation of the completed devices is promising, and detectors have been mounted on dedicated boards in view of the upcoming tests with neutrons.publishedVersio

Characterization of boron-coated silicon sensors for thermal neutron detection

Silicon neutron detectors can operate at low voltage and come with ease of fabrication and the possibility of integration of readout electronics and thus are attractive from an application point of view. In this paper, we have studied thermal neutron capture by silicon diodes coated with boron carbide (B4C). One of the surfaces of the diodes was covered with either natural B4C (B4C) or with enriched B4C (B4C). We have investigated: (a) the effect of increase in the sensitive area of the surface of the diode covered with B4C on the neutron detection efficiency and (b) the effect of enrichment of 10B in B4C. The difference in 10B in B4C (16 at.% in the deposited film) and B4C ( 79 at.% in the deposited film) leads to about three times increase in detection efficiency of the same detector. For the given experimental conditions, we do not observe a direct relationship between increase in the surface area and the detection efficiency. Energy spectra obtained by Geant4 simulations support the experimental observation of finding no direct relation between increase in the surface area and the detection efficiency.publishedVersio

Response of a Li-glass/multi-anode photomultiplier detector to collimated thermal-neutron beams

The response of a position-sensitive Li-glass scintillator detector being developed for thermal-neutron detection with 6 mm position resolution has been investigated using collimated beams of thermal neutrons. The detector was moved perpendicularly through the neutron beams in 0.5 to 1.0 mm horizontal and vertical steps. Scintillation was detected in an 8 X 8 pixel multi-anode photomultiplier tube on an event-by-event basis. In general, several pixels registered large signals at each neutron-beam location. The number of pixels registering signal above a set threshold was investigated, with the maximization of the single-hit efficiency over the largest possible area of the detector as the primary goal. At a threshold of ~50% of the mean of the full-deposition peak, ~80% of the events were registered in a single pixel, resulting in an effective position resolution of ~5 mm in X and Y. Lower thresholds generally resulted in events demonstrating higher pixel multiplicities, but these events could also be localized with ~5 mm position resolution.Comment: 23 pages, 8 figure

Ionic conductivity and the formation of cubic CaH₂ in the LiBH₄-Ca(BH₄)₂ composite

Transient absorption spectroscopy is used to follow the reactive intermediates involved in the first steps in the photochemistry initiated by ultraviolet (266-nm wavelength) excitation of solutions of 1,5-hexadiene, isoprene, and 2,3-dimethylbut-2-ene in carbon tetrachloride or chloroform. Ultraviolet and visible bands centered close to 330 and 500 nm in both solvents are assigned respectively to a charge transfer band of Cl-solvent complexes and the strong absorption band of a higher energy isomeric form of the solvent molecules (iso-CCl3–Cl or iso-CHCl2–Cl). These assignments are supported by calculations of electronic excitation energies. The isomeric forms have significant contributions to their structures from charge-separated resonance forms and offer a reinterpretation of previous assignments of the carriers of the visible bands that were based on pulsed radiolysis experiments. Kinetic analysis demonstrates that the isomeric forms are produced via the Cl–solvent complexes. Addition of the unsaturated hydrocarbons provides a reactive loss channel for the Cl–solvent complexes, and reaction radii and bimolecular rate coefficients are derived from analysis using a Smoluchowski theory model. For reactions of Cl with 1,5-hexadiene, isoprene, and 2,3-dimethylbut-2-ene in CCl4, rate coefficients at 294 K are, respectively, (8.6 ± 0.8) × 109, (9.5 ± 1.6) × 109, and (1.7 ± 0.1) × 1010 M–1 s–1. The larger reaction radius and rate coefficient for 2,3-dimethylbut-2-ene are interpreted as evidence for an H-atom abstraction channel that competes effectively with the channel involving addition of a Cl-atom to a C═C bond. However, the addition mechanism appears to dominate the reactions of 1,5-hexadiene and isoprene. Two-photon excited CCl4 or CHCl3 can also ionize the diene or alkene solute