Synthesis and Characterization of Hybrid-Magnetic Nanoparticles and Their Application for Removal of Arsenic from Groundwater

Multiwall carbon nanotubes (MWCNTs) were oxidized with different agents and a characterization study was carried out. Then, hybrid-magnetic nanoparticles (HMNPs) were synthesized as iron oxide supported on the selected multiwalled carbon nanotubes (MWCNTs-Fe3O4) obtained from MWCNTs oxidized with HNO3. The HMNPs characterization revealed the presence of iron oxide as magnetite onto the MWCNTs surfaces. These HMNPs were used for arsenic removal from groundwater. The adsorption process variables were optimized (concentration of NPs, contact time, and pH), and these systems could remove 39.93 mg As/g adsorbent. Therefore, these nanoparticles appear as a good alternative for removing arsenic from water samples

Electrochemically reduced graphene oxide-based screen-printed electrodes for total tetracycline determination by adsorptive transfer stripping differential pulse voltammetry

Disposable electrochemically reduced graphene oxide-based (ERGO) screen-printed electrodes (SPE) were developed for the determination of total tetracyclines as a sample screening approach. To this end, a selective adsorption-detection approach relied on adsorptive transfer stripping differential pulse voltammetry (AdTDPV) was devised, where the high adsorption capacity and the electrochemical properties of ERGO were simultaneously exploited. The approach was very simple, fast (6 min.), highly selective by combining the adsorptive and the electrochemical features of tetracyclines, and it used just 10 μL of the sample. The electrochemical sensor applicability was demonstrated in the analysis of environmental and food samples. The not-fully explored AdTDPV analytical possibilities on disposable nanostructured transducers become a new tool in food and environmental fields; drawing new horizons for “in-situ” analysis.Fil: Lorenzetti, Anabela Silvana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Química del Sur. Universidad Nacional del Sur. Departamento de Química. Instituto de Química del Sur; Argentina. Universidad de Alcalá; EspañaFil: Sierra, Tania. Universidad de Alcalá; EspañaFil: Domini, Claudia Elizabeth. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Química del Sur. Universidad Nacional del Sur. Departamento de Química. Instituto de Química del Sur; ArgentinaFil: Lista, Adriana Guillermina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Química del Sur. Universidad Nacional del Sur. Departamento de Química. Instituto de Química del Sur; ArgentinaFil: Crevillen, Agustin G.. Universidad Nacional de Educación a Distancia; EspañaFil: Escarpa Miguel, Jesús Alberto. Universidad de Alcalá; España. Instituto de Investigaciones Químicas “Andrés M. del Río”; Españ

Search for dark photons in Higgs boson production via vector boson fusion in proton-proton collisions at √s = 13 TeV

A search is presented for a Higgs boson that is produced via vector boson fusion and that decays to an undetected particle and an isolated photon. The search is performed by the CMS collaboration at the LHC, using a data set corresponding to an integrated luminosity of 130 fb−1, recorded at a center-of-mass energy of 13 TeV in 2016–2018. No significant excess of events above the expectation from the standard model background is found. The results are interpreted in the context of a theoretical model in which the undetected particle is a massless dark photon. An upper limit is set on the product of the cross section for production via vector boson fusion and the branching fraction for such a Higgs boson decay, as a function of the Higgs boson mass. For a Higgs boson mass of 125 GeV, assuming the standard model production rates, the observed (expected) 95% confidence level upper limit on the branching fraction is 3.5 (2.8)%. This is the first search for such decays in the vector boson fusion channel. Combination with a previous search for Higgs bosons produced in association with a Z boson results in an observed (expected) upper limit on the branching fraction of 2.9 (2.1)% at 95% confidence level

Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at s√=13TeV

The rate for Higgs (H) bosons production in association with either one (tH) or two (tt¯H) top quarks is measured in final states containing multiple electrons, muons, or tau leptons decaying to hadrons and a neutrino, using proton–proton collisions recorded at a center-of-mass energy of 13TeV by the CMS experiment. The analyzed data correspond to an integrated luminosity of 137fb−1. The analysis is aimed at events that contain H→WW, H→ττ, or H→ZZ decays and each of the top quark(s) decays either to lepton+jets or all-jet channels. Sensitivity to signal is maximized by including ten signatures in the analysis, depending on the lepton multiplicity. The separation among tH, tt¯H, and the backgrounds is enhanced through machine-learning techniques and matrix-element methods. The measured production rates for the tt¯H and tH signals correspond to 0.92±0.19(stat)+0.17−0.13(syst) and 5.7±2.7(stat)±3.0(syst) of their respective standard model (SM) expectations. The corresponding observed (expected) significance amounts to 4.7 (5.2) standard deviations for tt¯H, and to 1.4 (0.3) for tH production. Assuming that the Higgs boson coupling to the tau lepton is equal in strength to its expectation in the SM, the coupling yt of the Higgs boson to the top quark divided by its SM expectation, κt=yt/ySMt, is constrained to be within −0.9<κt<−0.7 or 0.7<κt<1.1, at 95% confidence level. This result is the most sensitive measurement of the tt¯H production rate to date.SCOAP

A fast fluorimetric flow injection method to determine ibuprofen

The native fluorescence of ibuprofen was enhanced when a host-guest complex of the analyte with beta cyclodextrin (beta-CD) was formed. So, based on this fact, a flow injection method to determine ibuprofen in different pharmaceutical preparations with fluorescence detection (lambdaem 287 nm, lambdaexc 223 nm) was developed. The calibration curve was linear over the range 6.00 - 60.0 mg L-1 of ibuprofen and the detection limit (LOD) for S/N=3 was 4.5 mg L-1. The relative standard deviation was 1.2% and the sample throughput 240 h-1. The method was validated by comparing the proposed and the official method to commercial preparation samples

A home-made hybrid system for the simultaneous determination of ergotamine, dipyrone and caffeine in pharmaceutical preparations

A novel home-made hybrid detection system was designed for simultaneous determination of caffeine (CAF), dipyrone (DIP) and ergotamine (ERG) in pharmaceutical preparations. Thus, ERG was determined by a fluorimetric signal and PLS-1 method for resolving DIP and CAF UV-Vis spectral data was used. The calibration curve for ERG was linear over the range 2.5-10 mg L-1. The calibration set consisted of 18 mixtures with 0.5 to 4 mg L-1 for CAF, 5 to 20 mg L-1 for DIP and 2.5 and 10 mg L-1 for ERG. Sample preparation prior to analysis was not required. A recovery study with the real samples was carried out and the obtained results were highly satisfactory