Variability in the mass absorption cross section of black carbon (BC) aerosols is driven by BC internal mixing state at a central European background site (Melpitz, Germany) in winter

Properties of atmospheric black carbon (BC) par- ticles were characterized during a field experiment at a ru- ral background site (Melpitz, Germany) in February 2017. BC absorption at a wavelength of 870 nm was measured by a photoacoustic extinctiometer, and BC physical properties (BC mass concentration, core size distribution and coating thickness) were measured by a single-particle soot photome- ter (SP2). Additionally, a catalytic stripper was used to in- termittently remove BC coatings by alternating between am- bient and thermo-denuded conditions. From these data the mass absorption cross section of BC (MACBC) and its en- hancement factor (EMAC) were inferred for essentially water- free aerosol as present after drying to low relative humid- ity (RH). Two methods were applied independently to in- vestigate the coating effect on EMAC: a correlation method (MACBC,ambient vs. BC coating thickness) and a denud- ing method (MACBC, ambient vs. MACBC, denuded). Observed EMAC values varied from 1.0 to 1.6 (lower limit from de- nuding method) or ∼ 1.2 to 1.9 (higher limit from correla- tion method), with the mean coating volume fraction ranging from 54 % to 78 % in the dominating mass equivalent BC core diameter range of 200–220 nm. MACBC and EMAC were strongly correlated with coating thickness of BC. By con- trast, other potential drivers of EMAC variability, such as dif- ferent BC sources (air mass origin and absorption Ångström exponent), coating composition (ratio of inorganics to organics) and BC core size distribution, had only minor effects. These results for ambient BC measured at Melpitz during winter show that the lensing effect caused by coatings on BC is the main driver of the variations in MACBC and EMAC, while changes in other BC particle properties such as source, BC core size or coating composition play only minor roles at this rural background site with a large fraction of aged parti- cles. Indirect evidence suggests that potential dampening of the lensing effect due to unfavorable morphology was most likely small or even negligible

Variability in the mass absorption cross section of black carbon (BC) aerosols is driven by BC internal mixing state at a central European background site (Melpitz, Germany) in winter

Properties of atmospheric black carbon (BC) particles were characterized during a field experiment at a rural background site (Melpitz, Germany) in February 2017. BC absorption at a wavelength of 870 nm was measured by a photoacoustic extinctiometer, and BC physical properties (BC mass concentration, core size distribution and coating thickness) were measured by a single-particle soot photometer (SP2). Additionally, a catalytic stripper was used to intermittently remove BC coatings by alternating between ambient and thermo-denuded conditions. From these data the mass absorption cross section of BC (MACBC) and its enhancement factor (EMAC) were inferred for essentially waterfree aerosol as present after drying to low relative humidity (RH). Two methods were applied independently to investigate the coating effect on EMAC: A correlation method (MACBC; ambient vs. BC coating thickness) and a denuding method (MACBC; ambient vs. MACBC; denuded). Observed EMAC values varied from 1.0 to 1.6 (lower limit from denuding method) or 1:2 to 1.9 (higher limit from correlation method), with the mean coating volume fraction ranging from 54% to 78% in the dominating mass equivalent BC core diameter range of 200?220 nm.MACBC and EMAC were strongly correlated with coating thickness of BC. By contrast, other potential drivers of EMAC variability, such as different BC sources (air mass origin and absorption Angström exponent), coating composition (ratio of inorganics to organics) and BC core size distribution, had only minor effects. These results for ambient BC measured at Melpitz during winter show that the lensing effect caused by coatings on BC is the main driver of the variations in MACBC and EMAC, while changes in other BC particle properties such as source, BC core size or coating composition play only minor roles at this rural background site with a large fraction of aged particles. Indirect evidence suggests that potential dampening of the lensing effect due to unfavorable morphology was most likely small or even negligible

Patients’ perceptions and experiences of living with a surgical wound healing by secondary intention : a qualitative study

Background: Most surgical wounds heal by primary intention, that is to say, the edges of the wound are brought together with sutures, staples, adhesive glue or clips. However, some wounds may be left open to heal (if there is a risk of infection, or if there has been significant tissue loss), and are known as ‘surgical wounds healing by secondary intention’. They are estimated to comprise approximately 28% of all surgical wounds and are frequently complex to manage. However, they are under researched and little is known of their impact on patients’ lives. Objectives: To explore patients’ views and experiences of living with a surgical wound healing by secondary intention. Design: A qualitative, descriptive approach. Settings: Participants were recruited from acute and community nursing services in two locations in the North of England characterised by high levels of deprivation and diverse populations. Participants: Participants were aged 18 years or older and had at least one surgical wound healing by secondary intention, which was slow to heal. Purposeful sampling was used to include patients of different gender, age, wound duration and type of surgery (general, vascular and orthopaedic). Twenty people were interviewed between January and July 2012. 2 Methods: Semi-structured interviews were conducted, guided by use of a topic guide developed with input from patient advisors. Data were thematically analysed using steps integral to the ‘Framework’ approach to analysis, including familiarisation with data; development of a coding scheme; coding, charting and cross comparison of data; interpretation of identified themes. Findings: Alarm, shock and disbelief were frequently expressed initial reactions, particularly to “unexpected” surgical wounds healing by secondary intention. Wound associated factors almost universally had a profound negative impact on daily life, physical and psychosocial functioning, and wellbeing. Feelings of frustration, powerlessness and guilt were common and debilitating. Patients’ hopes for healing were often unrealistic, posing challenges for the clinicians caring for them. Participants expressed dissatisfaction with a perceived lack of continuity and consistency of care in relation to wound management. Conclusions: Surgical wounds healing by secondary intention can have a devastating effect on patients, both physical and psychosocial. Repercussions for patients’ family members can also be extremely detrimental, including financial pressures. Health care professionals involved in the care of patients with these wounds face multiple, complex challenges, compounded by the limited evidence base regarding cost-effectiveness of different treatment regimens for these types of wounds

Our synthetic environment

xii, 285, xx p. ; 22 cm

Crisis in our cities

xii+239hlm.;21c