Contact lens education for the practitioners of the future

The World Health Organization has identified a shortage of trained human resources as one of the greatest challenges to increasing the availability of eye care services and reducing preventable visual impairment around the world. Increased prevalence of myopia and new strategies for myopia management have raised the prospect of various interventions, including contact lenses for therapeutic use as well as for refractive correction. More personnel skilled in contact lens fitting will be needed to address potential worldwide demand for these interventions. This review investigates the current status and future requirements of global contact lens education in light of these developments. The COVD‐19 pandemic led educational institutions worldwide to move towards online delivery. An online survey among 546 educators, conducted in May 2020, investigated changes to contact lens education delivery before and after the onset of the pandemic. A total of 214 responses were received from 32 countries. Prior to COVID‐19 restrictions, 23% of educators had conducted more than 50% of their total teaching online; however, 69% expected to conduct more than half of their teaching online by the end of 2020 and 12% anticipated 90% or more of their teaching would be online. Some 76% of educators expected to provide more online lectures after the pandemic and 63% anticipated new methods to deliver practical education. Around half were planning to introduce new teaching online platforms (54%) and more online assessment methods (53%). The global need for increasing numbers of skilled personnel points to a crucial role for educators in teaching the contact lens practitioners of the future. Contact lens education delivery was already evolving prior to COVID‐19, and changes that are currently occurring may lead to permanent differences in the way contact lenses are taught in future. The International Association of Contact Lens Educators (IACLE) provides educators with a standardised global curriculum, online resources and teaching technology that could also serve as a model for wider ophthalmic education in future

The Changes of Posterior Corneal Surface and High-Order Aberrations after Refractive Surgery in Moderate Myopia

PURPOSE: To compare forward shift of posterior corneal surface and higher-order aberration (HOA) changes after LASIK, LASEK, and wavefront-guided LASEK surgery in moderate myopia METHODS: One hundred eighty four eyes undergoing LASIK, LASEK and wavefront-guided LASEK with VISX STAR S4 were included in this study. The posterior corneal elevation was measured with Orbscan before, 2 and 4 months after surgery. Changes of the elevation were assessed using the difference map generated from preoperative and postoperative elevation maps. The values of higher-order aberrations were evaluated preoperatively and 2 months postoperatively with Wavefront aberrometer. RESULTS: The posterior corneal surface displayed forward shift of 27.2+/-11.45 micrometer, 24.3+/-9.76 micrometer in LASIK group, 23.4+/-10.5 micrometer, 23.6+/10.55 micrometer in LASEK group, 24.0+/-14.95 micrometer, 28.4+/-14.72 micrometer in wavefront-guided LASEK group at 2 months and 4 months, respectively. There were no statistically significant differences among those three groups, and between 2 and 4 months. The root mean score (RMS) of HOA was increased after LASIK and LASEK (p=0.000, p=0.000, respectively). The mean change of HOA-RMS was significantly smaller in wavefront-guided LASEK than LASIK or LASEK (p=0.000, p=0.000, respectively, Bonferroni-corrected). CONCLUSIONS: The changes of posterior corneal surface forward shift showed no difference among LASIK, LASEK and wavefront-guided LASEK in moderate myopia. HOAs were significantly increased after LASIK and LASEK. The changes of HOAs were significant smaller in wavefront-guided LASEK than LASIK or LASEK

Differences in Practitioner Experience, Practice Type, and Profession in Attitudes Toward Growing Contact Lens Practice

OBJECTIVE: To investigate eye care practitioners' attitudes and perceptions toward potential interventions that can enhance contact lens (CL) practice across the world, and how this is influenced by their practice setting. METHODS: A self-administered, anonymized survey was constructed in English and then forward and backward translated into six more languages. The survey was distributed online via social media platforms and mailing lists involving reputed international professional bodies. RESULTS: In total, 2,222 responses from 27 countries with sufficient responses were analyzed (53% females, median age- 37 years). Most of the respondents were optometrists (81.9%) and 47.6% were from stand-alone/independent practices. Median working experience in CL prescribing was 11.0 years (IQR: 18.0, 4-22 years). Over two-third of them declared themselves to be very hopeful (22.9%) or hopeful (45.1%) about the future of their CL practice. Among the potential interventions proposed, continuous update of knowledge and skills and competently managing CL-related complications were rated the most important (median score: 9/10 for each). Practitioners working in national/regional retail chains expressed higher proactivity in recommending CLs (9/10) than those in local chains, hospitals, and universities (for all 8/10, P <0.05). National differences were also identified in eye care practitioner attitudes and perceptions ( P <0.05). CONCLUSIONS: The study provided important information to delineate a variety of elements characterizing CL practice across the world. These insights can serve as a basis to design strategies at national and international levels

High-sensitivity troponin assays for the early rule-out or diagnosis of acute myocardial infarction in people with acute chest pain: a systematic review and cost-effectiveness analysis.

BACKGROUND: Early diagnosis of acute myocardial infarction (AMI) can ensure quick and effective treatment but only 20% of adults with emergency admissions for chest pain have an AMI. High-sensitivity cardiac troponin (hs-cTn) assays may allow rapid rule-out of AMI and avoidance of unnecessary hospital admissions and anxiety. OBJECTIVE: To assess the clinical effectiveness and cost-effectiveness of hs-cTn assays for the early (within 4 hours of presentation) rule-out of AMI in adults with acute chest pain. METHODS: Sixteen databases, including MEDLINE and EMBASE, research registers and conference proceedings, were searched to October 2013. Study quality was assessed using QUADAS-2. The bivariate model was used to estimate summary sensitivity and specificity for meta-analyses involving four or more studies, otherwise random-effects logistic regression was used. The health-economic analysis considered the long-term costs and quality-adjusted life-years (QALYs) associated with different troponin (Tn) testing methods. The de novo model consisted of a decision tree and Markov model. A lifetime time horizon (60 years) was used. RESULTS: Eighteen studies were included in the clinical effectiveness review. The optimum strategy, based on the Roche assay, used a limit of blank (LoB) threshold in a presentation sample to rule out AMI [negative likelihood ratio (LR-) 0.10, 95% confidence interval (CI) 0.05 to 0.18]. Patients testing positive could then have a further test at 2 hours; a result above the 99th centile on either sample and a delta (Δ) of ≥ 20% has some potential for ruling in an AMI [positive likelihood ratio (LR+) 8.42, 95% CI 6.11 to 11.60], whereas a result below the 99th centile on both samples and a Δ of < 20% can be used to rule out an AMI (LR- 0.04, 95% CI 0.02 to 0.10). The optimum strategy, based on the Abbott assay, used a limit of detection (LoD) threshold in a presentation sample to rule out AMI (LR- 0.01, 95% CI 0.00 to 0.08). Patients testing positive could then have a further test at 3 hours; a result above the 99th centile on this sample has some potential for ruling in an AMI (LR+ 10.16, 95% CI 8.38 to 12.31), whereas a result below the 99th centile can be used to rule out an AMI (LR- 0.02, 95% CI 0.01 to 0.05). In the base-case analysis, standard Tn testing was both most effective and most costly. Strategies considered cost-effective depending upon incremental cost-effectiveness ratio thresholds were Abbott 99th centile (thresholds of < £6597), Beckman 99th centile (thresholds between £6597 and £30,042), Abbott optimal strategy (LoD threshold at presentation, followed by 99th centile threshold at 3 hours) (thresholds between £30,042 and £103,194) and the standard Tn test (thresholds over £103,194). The Roche 99th centile and the Roche optimal strategy [LoB threshold at presentation followed by 99th centile threshold and/or Δ20% (compared with presentation test) at 1-3 hours] were extendedly dominated in this analysis. CONCLUSIONS: There is some evidence to suggest that hs-CTn testing may provide an effective and cost-effective approach to early rule-out of AMI. Further research is needed to clarify optimal diagnostic thresholds and testing strategies. STUDY REGISTRATION: This study is registered as PROSPERO CRD42013005939. FUNDING: The National Institute for Health Research Health Technology Assessment programme

Work Environments and Exposure to Hazardous Substances in Korean Tire Manufacturing

Objectives: The purpose of this study is to evaluate the tire manufacturing work environments extensively and to identify workers’ exposure to hazardous substances in various work processes. Methods: Personal air sampling was conducted to measure polycyclic aromatic hydrocarbons, carbon disulfide, 1,3-butadiene, styrene, methyl isobutyl ketone, methylcyclohexane, formaldehyde, sulfur dioxide, and rubber fume in tire manufacturing plants using the National Institute for Occupational Safety Health Manual of Analytical Methods. Noise, carbon monoxide, and heat stress exposure were evaluated using direct reading instruments. Past concentrations of rubber fume were assessed using regression analysis of total particulate data from 2003 to 2007, after identifying the correlation between the concentration of total particulate and rubber fume. Results: Workers were exposed to rubber fume that exceeded 0.6 mg/m3, the maximum exposure limit of the UK, in curing and production management processes. Forty-seven percent of workers were exposed to noise levels exceeding 85 dBA Workers in the production management process were exposed to 28.1°C (wet bulb globe temperature value, WBGT value) even when the outdoor atmosphere was 2.7°C (WBGT value). Exposures to other substances were below the limit of detection or under a tenth of the threshold limit values given by the American Conference of Governmental Industrial Hygienists. Conclusion: To better classify exposure groups and to improve work environments, examining closely at rubber fume components and temperature as risk indicators in tire manufacturing is recommended

Comparison of Real Time Nanoparticle Monitoring Instruments in the Workplaces

Background: Relationships among portable scanning mobility particle sizer (P-SMPS), condensation particle counter (CPC), and surface area monitor (SAM), which are different metric measurement devices, were investigated, and two widely used research grade (RG)-SMPSs were compared to harmonize the measurement protocols. Methods: Pearson correlation analysis was performed to compare the relation between P-SMPS, CPC, and SAM and two common RG-SMPS. Results: For laboratory and engineered nanoparticle (ENP) workplaces, correlation among devices showed good relationships. Correlation among devices was fair in unintended nanoparticle (UNP)-emitting workplaces. This is partly explained by the fact that shape of particles was not spherical, although calibration of sampling instruments was performed using spherical particles and the concentration was very high at the UNP workplaces to allow them to aggregate more easily. Chain-like particles were found by scanning electron microscope in UNP workplaces. The CPC or SAM could be used as an alternative instrument instead of SMPS at the ENP-handling workplaces. At the UNP workplaces, where concentration is high, real-time instruments should be used with caution. There are significant differences between the two SMPSs tested. TSI SMPS showed about 20% higher concentration than the Grimm SMPS in all workplaces. Conclusions: For nanoparticle measurement, CPC and SAM might be useful to find source of emission at laboratory and ENP workplaces instead of P-SMPS in the first stage. An SMPS is required to measure with high accuracy. Caution is necessary when comparing data from different nanoparticle measurement devices and RG-SMPSs

Assessment of Occupational Health Risks for Maintenance Work in Fabrication Facilities: Brief Review and Recommendations

Background: This study focuses on assessing occupational risk for the health hazards encountered during maintenance works (MW) in semiconductor fabrication (FAB) facilities. Objectives: The objectives of this study include: 1) identifying the primary health hazards during MW in semiconductor FAB facilities; 2) reviewing the methods used in evaluating the likelihood and severity of health hazards through occupational health risk assessment (OHRA); and 3) suggesting variables for the categorization of likelihood of exposures to health hazards and the severity of health effects associated with MW in FAB facilities. Methods: A literature review was undertaken on OHRA methodology and health hazards resulting from MW in FAB facilities. Based on this review, approaches for categorizing the exposure to health hazards and the severity of health effects related to MW were recommended. Results: Maintenance workers in FAB facilities face exposure to hazards such as debris, machinery entanglement, and airborne particles laden with various chemical components. The level of engineering and administrative control measures is suggested to assess the likelihood of simultaneous chemical and dust exposure. Qualitative key factors for mixed exposure estimation during MW include the presence of safe operational protocols, the use of air-jet machines, the presence and effectiveness of local exhaust ventilation system, chamber post-purge and cooling, and proper respirator use. Using the risk (R) and hazard (H) codes of the Globally Harmonized System alongside carcinogenic, mutagenic, or reprotoxic classifications aid in categorizing health effect severity for OHRA. Conclusion: Further research is needed to apply our proposed variables in OHRA for MW in FAB facilities and subsequently validate the findings

Outbreak of Sudden Cardiac Deaths in a Tire Manufacturing Facility: Can It Be Caused by Nanoparticles?

Objectives: The purpose of this study was to review clinical characteristics and working environments of sudden cardiac death (SCD) cases associated with a tire manufacturer in Korea, and review possible occupational risk factors for cardiovascular disease including nanoparticles (ultrafine particles, UFPs). Methods: We reviewed (i) the clinical course of SCD cases and (ii) occupational and non-occupational risk factors including chemicals, the physical work environment, and job characteristics. Results: Possible occupational factors were chemicals, UFPs of rubber fume, a hot environment, shift work, overworking, and noise exposure. The mean diameter of rubber fume (63-73 nm) was (larger than diesel exhaust [12 nm] and outdoor dust [50 nm]). The concentration of carbon disulfide, carbon monoxide and styrene were lower than the limit of detection. Five SCD cases were exposed to shift work and overworking. Most of the cases had several non-occupational factors such as hypertension, overweight and smoking. Conclusion: The diameter of rubber fume was larger than outdoor and the diesel exhaust, the most well known particulate having a causal relationship with cardiovascular disease. The possibility of a causal relation between UFPs of rubber fume and SCD was not supported in this study. However, it is necessary to continue studying the relationship between large sized UFPs and SCD