759 research outputs found

    Segregation, precipitation, and \alpha-\alpha' phase separation in Fe-Cr alloys: a multi-scale modelling approach

    Full text link
    Segregation, precipitation, and phase separation in Fe-Cr systems is investigated. Monte Carlo simulations using semiempirical interatomic potential, first-principles total energy calculations, and experimental spectroscopy are used. In order to obtain a general picture of the relation of the atomic interactions and properties of Fe-Cr alloys in bulk, surface, and interface regions several complementary methods has to be used. Using Exact Muffin-Tin Orbitals method the effective chemical potential as a function of Cr content (0-15 at.% Cr) is calculated for a surface, second atomic layer and bulk. At ~10 at.% Cr in the alloy the reversal of the driving force of a Cr atom to occupy either bulk or surface sites is obtained. The Cr containing surfaces are expected when the Cr content exceeds ~10 at.%. The second atomic layer forms about 0.3 eV barrier for the migration of Cr atoms between bulk and surface atomic layer. To get information on Fe-Cr in larger scales we use semiempirical methods. Using combined Monte Carlo molecular dynamics simulations, based on semiempirical potential, the precipitation of Cr into isolated pockets in bulk Fe-Cr and the upper limit of the solubility of Cr into Fe layers in Fe/Cr layer system is studied. The theoretical predictions are tested using spectroscopic measurements. Hard X-ray photoelectron spectroscopy and Auger electron spectroscopy investigations were carried out to explore Cr segregation and precipitation in Fe/Cr double layer and Fe_0.95Cr_0.05 and Fe_0.85Cr_0.15 alloys. Initial oxidation of Fe-Cr was investigated experimentally at 10^-8 Torr pressure of the spectrometers showing intense Cr_2O_3 signal. Cr segregation and the formation of Cr rich precipitates were traced by analysing the experimental spectral intensities with respect to annealing time, Cr content, and kinetic energy of the exited electron.Comment: 16 pages, 14 figures, 52 reference

    The effect of coating properties on the performance of a-C:H and ta-C films

    Get PDF
    DLC films cover a wide range of different carbon based coatings, starting from soft to extremely hard diamond-like carbon films. In this study two different types of DLC films have been studied in respect of their stress and strain characteristics and tribological performance. The coatings are hydrogenated amorphous carbon (a-C:H) coatings deposited by PECVD and tetrahedral amorphous carbon (ta-C) coating deposited by filtered arc technique. In order to evaluate the mechanical behaviour of the coatings under load, 3D FE modelling was carried out in combination with scratch testing. Also the tribological performance was evaluated with pin-on-disc tests using stepwise increasing normal load. The 3D FEM model was developed for calculating the stress and strain distributions of DLC coated systems and to evaluate how coating thickness and elastic properties affect the stress-strain state at crack initiation location. The simulation was compared to the findings to experimental observations in scratch test contact conditions, when the spherical diamond tip was moving with increased load on a coated surface. The coating performance was evaluated with scratch testing to detect the crack generation as well as the coating adhesion. When combining the simulated coating characteristics with empirical observation of coating fracture patterns the coating fracture performance and tolerance to cracking could be evaluated. A major effect of the coating elastic modulus on the stress and fracture behaviour of the coatings was observed. In the tribological testing the both coatings had a low friction performance. In the tribological testing with stepwise increasing load, the critical load for coating delamination was higher for the a-C:H coating, which is in accordance with the results of FE modelling of coating stress state

    Reliability of prehospital patient classification in helicopter emergency medical service missions

    Get PDF
    Background Several scores and codes are used in prehospital clinical quality registries but little is known of their reliability. The aim of this study is to evaluate the inter-rater reliability of the American Society of Anesthesiologists physical status (ASA-PS) classification system, HEMS benefit score (HBS), International Classification of Primary Care, second edition (ICPC-2) and Eastern Cooperative Oncology Group (ECOG) performance status in a helicopter emergency medical service (HEMS) clinical quality registry (CQR). Methods All physicians and paramedics working in HEMS in Finland and responsible for patient registration were asked to participate in this study. The participants entered data of six written fictional missions in the national CQR. The inter-rater reliability of the ASA-PS, HBS, ICPC-2 and ECOG were evaluated using an overall agreement and free-marginal multi-rater kappa (Kappa(free)). Results All 59 Finnish HEMS physicians and paramedics were invited to participate in this study, of which 43 responded and 16 did not answer. One participant was excluded due to unfinished data entering. ASA-PS had an overall agreement of 40.2% and Kappa(free) of 0.28 in this study. HBS had an overall agreement of 44.7% and Kappa(free) of 0.39. ICPC-2 coding had an overall agreement of 51.5% and Kappa(free) of 0.47. ECOG had an overall agreement of 49.6% and Kappa(free) of 0.40. Conclusion This study suggests a marked inter-rater unreliability in prehospital patient scoring and coding even in a relatively uniform group of practitioners working in a highly focused environment. This indicates that the scores and codes should be specifically designed or adapted for prehospital use, and the users should be provided with clear and thorough instructions on how to use them.Peer reviewe

    Cardiorespiratory Fitness Estimation Based on Heart Rate and Body Acceleration in Adults With Cardiovascular Risk Factors : Validation Study

    Get PDF
    Publisher Copyright: © Antti-Pekka E Rissanen, Mirva Rottensteiner, Urho M Kujala, Jari L O Kurkela, Jan Wikgren, Jari A Laukkanen. Originally published in JMIR Cardio (https://cardio.jmir.org), 25.10.2022. This is an open-access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work, first published in JMIR Cardio, is properly cited. The complete bibliographic information, a link to the original publication on https://cardio.jmir.org, as well as this copyright and license information must be included.Background: Cardiorespiratory fitness (CRF) is an independent risk factor for cardiovascular morbidity and mortality. Adding CRF to conventional risk factors (eg, smoking, hypertension, impaired glucose metabolism, and dyslipidemia) improves the prediction of an individual's risk for adverse health outcomes such as those related to cardiovascular disease. Consequently, it is recommended to determine CRF as part of individualized risk prediction. However, CRF is not determined routinely in everyday clinical practice. Wearable technologies provide a potential strategy to estimate CRF on a daily basis, and such technologies, which provide CRF estimates based on heart rate and body acceleration, have been developed. However, the validity of such technologies in estimating individual CRF in clinically relevant populations is poorly known. Objective: The objective of this study is to evaluate the validity of a wearable technology, which provides estimated CRF based on heart rate and body acceleration, in working-aged adults with cardiovascular risk factors. Methods: In total, 74 adults (age range 35-64 years; n=56, 76% were women; mean BMI 28.7, SD 4.6 kg/m2) with frequent cardiovascular risk factors (eg, n=64, 86% hypertension; n=18, 24% prediabetes; n=14, 19% type 2 diabetes; and n=51, 69% metabolic syndrome) performed a 30-minute self-paced walk on an indoor track and a cardiopulmonary exercise test on a treadmill. CRF, quantified as peak O2 uptake, was both estimated (self-paced walk: a wearable single-lead electrocardiogram device worn to record continuous beat-to-beat R-R intervals and triaxial body acceleration) and measured (cardiopulmonary exercise test: ventilatory gas analysis). The accuracy of the estimated CRF was evaluated against that of the measured CRF. Results: Measured CRF averaged 30.6 (SD 6.3; range 20.1-49.6) mL/kg/min. In all participants (74/74, 100%), mean difference between estimated and measured CRF was −0.1 mL/kg/min (P = .90), mean absolute error was 3.1 mL/kg/min (95% CI 2.6-3.7), mean absolute percentage error was 10.4% (95% CI 8.5-12.5), and intraclass correlation coefficient was 0.88 (95% CI 0.80-0.92). Similar accuracy was observed in various subgroups (sexes, age, BMI categories, hypertension, prediabetes, and metabolic syndrome). However, mean absolute error was 4.2 mL/kg/min (95% CI 2.6-6.1) and mean absolute percentage error was 16.5% (95% CI 8.6-24.4) in the subgroup of patients with type 2 diabetes (14/74, 19%). Conclusions: The error of the CRF estimate, provided by the wearable technology, was likely below or at least very close to the clinically significant level of 3.5 mL/kg/min in working-aged adults with cardiovascular risk factors, but not in the relatively small subgroup of patients with type 2 diabetes. From a large-scale clinical perspective, the findings suggest that wearable technologies have the potential to estimate individual CRF with acceptable accuracy in clinically relevant populations.Peer reviewe

    Extracellular Superoxide Dismutase Expression in Papillary Thyroid Cancer Mesenchymal Stem/Stromal Cells Modulates Cancer Cell Growth and Migration

    Get PDF
    Tumor stroma-secreted growth factors, cytokines, and reactive oxygen species (ROS) influence tumor development from early stages to the metastasis phase. Previous studies have demonstrated downregulation of ROS-producing extracellular superoxide dismutase (SOD3) in thyroid cancer cell lines although according to recent data, the expression of SOD3 at physiological levels stimulates normal and cancer cell proliferation. Therefore, to analyze the expression of SOD3 in tumor stroma, we characterized stromal cells from the thyroid. We report mutually exclusive desmoplasia and inflammation in papillary and follicular thyroid cancers and the presence of multipotent mesenchymal stem/stromal cells (MSCs) in non-carcinogenic thyroids and papillary thyroid cancer (PTC). The phenotypic and differentiation characteristics of Thyroid MSCs and PTC MSCs were comparable with bone marrow MSCs. A molecular level analysis showed increased FIBROBLAST ACTIVATING PROTEIN, COLLAGEN 1 TYPE A1, TENASCIN, and SOD3 expression in PTC MSCs compared to Thyroid MSCs, suggesting the presence of MSCs with a fibrotic fingerprint in papillary thyroid cancer tumors and the autocrine-paracrine conversion of SOD3 expression, which was enhanced by cancer cells. Stromal SOD3 had a stimulatory effect on cancer cell growth and an inhibitory effect on cancer cell migration, thus indicating that SOD3 might be a novel player in thyroid tumor stroma

    Measuring psychosocial stress with heart rate variability-based methods in different health and age groups

    Get PDF
    Objective. Autonomic nervous system function and thereby bodily stress and recovery reactions may be assessed by wearable devices measuring heart rate (HR) and its variability (HRV). So far, the validity of HRV-based stress assessments has been mainly studied in healthy populations. In this study, we determined how psychosocial stress affects physiological and psychological stress responses in both young (18-30 years) and middle-aged (45-64 years) healthy individuals as well as in patients with arterial hypertension and/or either prior evidence of prediabetes or type 2 diabetes. We also studied how an HRV-based stress index (Relax-Stress Intensity, RSI) relates to perceived stress (PS) and cortisol (CRT) responses during psychosocial stress. Approach. A total of 197 participants were divided into three groups: (1) healthy young (HY, N = 63), (2) healthy middle-aged (HM, N = 61) and (3) patients with cardiometabolic risk factors (Pts, N = 73, 32-65 years). The participants underwent a group version of Trier Social Stress Test (TSST-G). HR, HRV (quantified as root mean square of successive differences of R-R intervals, RMSSD), RSI, PS, and salivary CRT were measured regularly during TSST-G and a subsequent recovery period. Main results. All groups showed significant stress reactions during TSST-G as indicated by significant responses of HR, RMSSD, RSI, PS, and salivary CRT. Between-group differences were also observed in all measures. Correlation and regression analyses implied RSI being the strongest predictor of CRT response, while HR was more closely associated with PS. Significance. The HRV-based stress index mirrors responses of CRT, which is an independent marker for physiological stress, around TSST-G. Thus, the HRV-based stress index may be used to quantify physiological responses to psychosocial stress across various health and age groups.Peer reviewe

    NQO2 is a reactive oxygen species generating off-target for acetaminophen

    Get PDF
    [Image: see text] The analgesic and antipyretic compound acetaminophen (paracetamol) is one of the most used drugs worldwide. Acetaminophen overdose is also the most common cause for acute liver toxicity. Here we show that acetaminophen and many structurally related compounds bind quinone reductase 2 (NQO2) in vitro and in live cells, establishing NQO2 as a novel off-target. NQO2 modulates the levels of acetaminophen derived reactive oxygen species, more specifically superoxide anions, in cultured cells. In humans, NQO2 is highly expressed in liver and kidney, the main sites of acetaminophen toxicity. We suggest that NQO2 mediated superoxide production may function as a novel mechanism augmenting acetaminophen toxicity
    • …
    corecore