Non-response to a life course socioeconomic position indicator in surveillance: comparison of telephone and face-to-face modes

© 2008 Chittleborough et al; licensee BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Background Measurement of socioeconomic position (SEP) over the life course in population health surveillance systems is important for examining differences in health and illness between different population groups and for monitoring the impact of policies and interventions aimed at reducing health inequities and intergenerational disadvantage over time. While face-to-face surveys are considered the gold standard of interviewing techniques, computer-assisted telephone interviewing is often preferred for cost and convenience. This study compared recall of parents' highest level of education in telephone and face-to-face surveys. Methods Questions about father's and mother's highest education level were included in two representative population health surveys of South Australians aged 18 years and over in Spring 2004. A random sample selected from the electronic white pages (EWP) responded to a computer-assisted telephone interview (n = 2999), and a multistage clustered area sample responded to a face-to-face interview (n = 2893). A subsample of respondents in the face-to-face sample who owned a telephone that was listed in the EWP (n = 2206) was also compared to the telephone interview sample. Results The proportion of respondents who provided information about their father's and mother's highest education level was significantly higher in the face-to-face interview (86.3% and 87.8%, respectively) than in the telephone interview (80.4% and 79.9%, respectively). Recall was also significantly higher in the subsample of respondents in the face-to-face interview who had a telephone that was listed in the EWP. Those with missing data for parents' education were more likely to be socioeconomically disadvantaged regardless of the survey mode. Conclusion While face-to-face interviewing obtained higher item response rates for questions about parents' education, survey mode did not appear to influence the factors associated with having missing data on father's or mother's highest education level

The use of herbal medicines by people with cancer: a cross-sectional survey

BACKGROUND: A large proportion of cancer patients are estimated to use herbal medicines, but data to substantiate this are lacking. This study aimed to investigate the prevalence of herbal medicine use among cancer patients in the West Midlands, and determine the characteristics predicting herbal medicine use. METHODS: A cross-sectional survey of oncology patients (n=1498) being followed up at a hospital in Coventry was undertaken. Recipients were asked about herbal medicine use since their cancer diagnosis, and the association between sociodemographic and cancer-related characteristics and herbal medicine use was evaluated. RESULTS: A total of 1134 responses were received (75.7%). The prevalence of herbal medicine use was 19.7% (95% CI: 17.4-22.1; n=223). Users were more likely to be affluent, female, and aged under 50 years. Usage increased with time since cancer diagnosis (X(2) for trend=4.63; P=0.031). A validation data set, derived from a survey of oncology patients in Birmingham (n=541) with differing socioeconomic characteristics showed no significant difference in estimated prevalence (16.6%; 95% CI: 11.9-22.2). CONCLUSION: A substantial number of people with cancer are likely to be taking herbal medicines. Understanding the self-medication behaviours of these individuals is essential if health-care professionals are to support treatment adherence and avoid unwanted pharmacological interactions

Ricin Toxicokinetics and Its Sensitive Detection in Mouse Sera or Feces Using Immuno-PCR

Ricin (also called RCA-II or RCA(60)), one of the most potent toxins and documented bioweapons, is derived from castor beans of Ricinus communis. Several in vitro methods have been designed for ricin detection in complex food matrices in the event of intentional contamination. Recently, a novel Immuno-PCR (IPCR) assay was developed with a limit of detection of 10 fg/ml in a buffer matrix and about 10-1000-fold greater sensitivity than other methods in various food matrices.In order to devise a better diagnostic test for ricin, the IPCR assay was adapted for the detection of ricin in biological samples collected from mice after intoxication. The limit of detection in both mouse sera and feces was as low as 1 pg/ml. Using the mouse intravenous (iv) model for ricin intoxication, a biphasic half-life of ricin, with a rapid t(1/2)α of 4 min and a slower t(1/2)β of 86 min were observed. The molecular biodistribution time for ricin following oral ingestion was estimated using an antibody neutralization assay. Ricin was detected in the blood stream starting at approximately 6-7 h post- oral intoxication. Whole animal histopathological analysis was performed on mice treated orally or systemically with ricin. Severe lesions were observed in the pancreas, spleen and intestinal mesenteric lymph nodes, but no severe pathology in other major organs was observed.The determination of in vivo toxicokinetics and pathological effects of ricin following systemic and oral intoxication provide a better understanding of the etiology of intoxication and will help in the future design of more effective diagnostic and therapeutic methods

Efficacy of acupuncture for chronic low back pain: protocol for a randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Chronic back pain is a major public health problem and the primary reason patients seek acupuncture treatment. Therefore, an objective assessment of acupuncture efficacy is critical for making informed decisions about its appropriate role for patients with this common condition. This study addresses methodological shortcomings that have plagued previous studies evaluating acupuncture for chronic low back pain.</p> <p>Methods and Design</p> <p>A total of 640 participants (160 in each of four arms) between the ages of 18 and 70 years of age who have low back pain lasting at least 3 months will be recruited from integrated health care delivery systems in Seattle and Oakland. They will be randomized to one of two forms of Traditional Chinese Medical (TCM) acupuncture needling (individualized or standardized), a "control" group (simulated acupuncture), or to continued usual medical care. Ten treatments will be provided over 7 weeks. Study participants and the "Diagnostician" acupuncturists who evaluate participants and propose individualized treatments will be masked to the acupuncture treatment actually assigned each participant. The "Therapist" acupuncturists providing the treatments will not be masked but will have limited verbal interaction with participants. The primary outcomes, standard measures of dysfunction and bothersomeness of low back pain, will be assessed at baseline, and after 8, 26, and 52 weeks by telephone interviewers masked to treatment assignment. General health status, satisfaction with back care, days of back-related disability, and use and costs of healthcare services for back pain will also be measured. The primary analysis comparing outcomes by randomized treatment assignment will be analysis of covariance adjusted for baseline value. For both primary outcome measures, this trial will have 99% power to detect the presence of a minimal clinically significant difference among all four treatment groups and over 80% power for most pairwise comparisons. Secondary analyses will compare the proportions of participants in each group that improve by a clinically meaningful amount.</p> <p>Conclusion</p> <p>Results of this trial will help clarify the value of acupuncture needling as a treatment for chronic low back pain.</p> <p>Trial registration</p> <p>Clinical Trials.gov NCT00065585.</p

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Engineered Single-Domain Antibodies with High Protease Resistance and Thermal Stability

The extreme pH and protease-rich environment of the upper gastrointestinal tract is a major obstacle facing orally-administered protein therapeutics, including antibodies. Through protein engineering, several Clostridium difficile toxin A-specific heavy chain antibody variable domains (VHHs) were expressed with an additional disulfide bond by introducing Ala/Gly54Cys and Ile78Cys mutations. Mutant antibodies were compared to their wild-type counterparts with respect to expression yield, non-aggregation status, affinity for toxin A, circular dichroism (CD) structural signatures, thermal stability, protease resistance, and toxin A-neutralizing capacity. The mutant VHHs were found to be well expressed, although with lower yields compared to wild-type counterparts, were non-aggregating monomers, retained low nM affinity for toxin A, albeit the majority showed somewhat reduced affinity compared to wild-type counterparts, and were capable of in vitro toxin A neutralization in cell-based assays. Far-UV and near-UV CD spectroscopy consistently showed shifts in peak intensity and selective peak minima for wild-type and mutant VHH pairs; however, the overall CD profile remained very similar. A significant increase in the thermal unfolding midpoint temperature was observed for all mutants at both neutral and acidic pH. Digestion of the VHHs with the major gastrointestinal proteases, at biologically relevant concentrations, revealed a significant increase in pepsin resistance for all mutants and an increase in chymotrypsin resistance for the majority of mutants. Mutant VHH trypsin resistance was similar to that of wild-type VHHs, although the trypsin resistance of one VHH mutant was significantly reduced. Therefore, the introduction of a second disulfide bond in the hydrophobic core not only increases VHH thermal stability at neutral pH, as previously shown, but also represents a generic strategy to increase VHH stability at low pH and impart protease resistance, with only minor perturbations in target binding affinities. These are all desirable characteristics for the design of protein-based oral therapeutics

Método automático de clasificación de color en dientes humanos usando aprendizaje de máquina

Trabajo de InvestigaciónActualmente el proceso de identificación del color de los dientes para la fabricación de prótesis dentales es realizado manualmente por un experto que, utilizando un método de identificación visual, determina el color de las piezas dentales en la boca del paciente, usando guías de color como la VITA®. A pesar de que el método visual es el más utilizado para la identificación del color de dientes, este se ve afectado por distintas variables tales como: el cansancio del experto, la luminosidad en el ambiente, salud visual del especialista, entre otras que influyen en la identificación del color en los dientes. Los errores en la clasificación del color de los dientes pueden generar pérdidas de tiempo lo que implicaría en consecuencia sobrecostos que afectarían directamente al fabricante y la satisfacción final del cliente.1. Planteamiento del problema 2. Pregunta de investigación 3. Objetivos 4. Estado del arte 5. Marco de referencia 6. Alcances y limitaciones 7. Metodología 8. Diseño metodológico 9. Discusión y resultados 10. Conclusiones 11. Trabajos futuros 12. Bibliografía 13. ANEXOSPregradoIngeniero de Sistema

Lichen response to ammonia deposition defines the footprint of a penguin rookery

Ammonia volatilized from penguin rookeries is a major nitrogen source in Antarctic coastal terrestrial ecosystems. However, the spatial extent of ammonia dispersion from rookeries and its impacts have not been quantified previously. We measured ammonia concentration in air and lichen ecophysiological response variables proximate to an Adèlie penguin rookery at Cape Hallett, northern Victoria Land. Ammonia emitted from the rookery was 15N-enriched (δ15N value +6.9) and concentrations in air ranged from 36–75 µg m−3 at the rookery centre to 0.05 µg m−3 at a distance of 15.3 km. δ15N values and rates of phosphomonoesterase (PME) activity in the lichens Usnea sphacelata and Umbilicaria decussata were strongly negatively related to distance from the rookery and PME activity was positively related to thallus N:P mass ratio. In contrast, the lichen Xanthomendoza borealis, which is largely restricted to within an area 0.5 km from the rookery perimeter, had high N, P and 15N concentrations but low PME activity suggesting that nutrient scavenging capacity is suppressed in highly eutrophicated sites. An ammonia dispersion model indicates that ammonia concentrations sufficient to significantly elevate PME activity and δ15N values (≥0.1 µg NH3 m−3) occurred over c. 40–300 km2 surrounding the rookery suggesting that penguin rookeries potentially can generate large spatial impact zones. In a general linear model NH3 concentration and lichen species identity were found to account for 72 % of variation in the putative proportion of lichen thallus N originating from penguin derived NH3. The results provide evidence of large scale impact of N transfer from a marine to an N-limited terrestrial ecosystem