AgroCycle – developing a circular economy in agriculture

Continuing population growth and increasing consumption are driving global food demand, with agricultural activity expanding to keep pace. The modern agricultural system is wasteful, with Europe generating some 700 million tonnes of agrifood (agricultural and food) waste each year. The Agricultural Centre for Sustainable Energy Systems (ACSES) at Harper Adams University is involved in a major research and innovation project (AgroCycle) on the application of the ‘circular economy’ across the agri-food sector. In the context of the agrifood chain, the ‘circular economy’ aims to reduce waste while also making best use of the ‘wastes’ produced by using economically viable processes and procedures to increase their value . Led by University College Dublin, AgroCycle is a Horizon 2020 collaborative project with 26 partners. AgroCycle will address such opportunities directly by implementation of the ‘circular economy’ across the agri-food sector. The authors will present (a) a summary of the AgroCycle project and (b) the role played by Harper Adams in the project in evaluating the potential for small-scale anaerobic digestion (AD) technology that can be applied on farm to provide local heat, energy and nutrient recovery from mixed agricultural wastes

Evaluation of pyrolysis chars derived from marine macroalgae silage as soil amendments

Sections PDFPDF Tools Share Abstract Pyrolysis char residues from ensiled macroalgae were examined to determine their potential as growth promoters on germinating and transplanted seedlings. Macroalgae was harvested in May, July and August from beach collections, containing predominantly Laminaria digitata and Laminaria hyperborea ; naturally seeded mussel lines dominated by Saccharina latissima ; and lines seeded with cultivated L. digitata . Material was ensiled, pressed to pellets and underwent pyrolysis using a thermo‐catalytic reforming (TCR) process, with and without additional steam. The chars generated were then assessed through proximate and ultimate analysis. Seasonal changes had the prevalent impact on char composition, though using mixed beach‐harvested material gave a greater variability in elements than when using the offshore collections. Applying the char at 5% (v/v)/2% (w/w) into germination or seedling soils was universally negative for the plants, inhibiting or delaying all parameters assessed with no clear advantage in harvesting date, species or TCR processing methodology. In germinating lettuce seeds, soil containing the pyrolysis chars caused a longer germination time, poorer germination, fewer true leaves to be produced, a lower average plant health score and a lower final biomass yield. For transplanted ryegrass seedlings, there were lower plant survival rates, with surviving plants producing fewer leaves and tillers, lower biomass yields when cut and less regrowth after cutting. As water from the char‐contained plant pots inhibited the lettuce char control, one further observation was that run‐off water from the pyrolysis char released compounds which detrimentally affected cultivated plant growth. This study clearly shows that pyrolysed macroalgae char does not fit the standard assumption that chars can be used as soil amendments at 2% (w/w) addition levels. As the bioeconomy expands in the future, the end use of residues and wastes from bioprocessing will become a genuine global issue, requiring consideration and demonstration rather than hypothesized use

Bio-processing of macroalgae Palmaria palmata: metabolite fractionation from pressed fresh material and ensiling considerations for long-term storage

Red algae, belonging to the phylum Rhodophyta, contain an abundance of useful chemicals including bioactive molecules and present opportunities for the production of different products through biorefinery cascades. The rhodophyte Palmaria palmata, commonly termed dulse or dillisk, grows predominantly on the northern coasts of the Atlantic and Pacific Oceans and is a well-known snack food. Due to its abundance, availability and cultivation capacity, P. palmata was selected for study as a potential candidate for a biorefinery process. In addition to studying juice and solid fractions of freshly harvested P. palmata, we have investigated the novel possibility of preserving algal biomass by ensilaging protocols similar to those employed for terrestrial forage crops. In the metabolite partitioning within the solid and liquid fractions following screw-pressing, the majority of the metabolites screened for—water soluble carbohydrates, proteins and amino acids, lipids, pigments, phenolics and antioxidant activity—remained in the solid fraction, though at differing proportions depending on the metabolite, from 70.8% soluble amino acids to 98.2% chlorophyll a and 98.1% total carotenoids. For the ensiling study, screw-pressed P. palmata, with comparative wilted and chopped, and chopped only samples, were ensiled at scale with and without Safesil silage additive. All samples were successfully ensiled after 90 days, with screw-pressing giving lower or equal pH before and after ensiling compared with the other preparations. Of particular note was the effluent volumes generated during ensiling: 26–49% of the fresh weight, containing 16–34% of the silage dry matter. This may be of advantage depending on the final use of the biomass

Measurement of spin correlation in ttbar production using dilepton final states

We measure the correlation between the spin of the top quark and the spin of the anti-top quark in (ttbar -> W+ W- b bbar -> l+ nu b l- nubar bbar) final states produced in ppbar collisions at a center of mass energy sqrt(s)=1.96 TeV, where l is an electron or muon. The data correspond to an integrated luminosity of 5.4 fb-1 and were collected with the D0 detector at the Fermilab Tevatron collider. The correlation is extracted from the angles of the two leptons in the t and tbar rest frames, yielding a correlation strength C= 0.10^{+0.45}_{-0.45}, in agreement with the NLO QCD prediction within two standard deviations, but also in agreement with the no correlation hypothesis.Comment: 10 pages, 3 figures, submitted to PL

Search for single top quarks in the tau+jets channel using 4.8 fb−1^{-1} of ppˉp\bar{p} collision data

We present the first direct search for single top quark production using tau leptons. The search is based on 4.8 fb$^{-1}$ of integrated luminosity collected in $p\bar{p}$ collisions at $\sqrt{s}$=1.96 TeV with the D0 detector at the Fermilab Tevatron Collider. We select events with a final state including an isolated tau lepton, missing transverse energy, two or three jets, one or two of them $b$ tagged. We use a multivariate technique to discriminate signal from background. The number of events observed in data in this final state is consistent with the signal plus background expectation. We set in the tau+jets channel an upper limit on the single top quark cross section of \TauLimObs pb at the 95% C.L. This measurement allows a gain of 4% in expected sensitivity for the observation of single top production when combining it with electron+jets and muon+jets channels already published by the D0 collaboration with 2.3 fb$^{-1}$ of data. We measure a combined cross section of \SuperCombineXSall pb, which is the most precise measurement to date.Comment: 12 pages, 5 figure

b-Jet Identification in the D0 Experiment

Algorithms distinguishing jets originating from b quarks from other jet flavors are important tools in the physics program of the D0 experiment at the Fermilab Tevatron p-pbar collider. This article describes the methods that have been used to identify b-quark jets, exploiting in particular the long lifetimes of b-flavored hadrons, and the calibration of the performance of these algorithms based on collider data.Comment: submitted to Nuclear Instruments and Methods in Physics Research

Measurement of Z/gamma*+jet+X angular distributions in ppbar collisions at sqrt{s}=1.96 TeV

We present the first measurements at a hadron collider of differential cross sections for Z+jet+X production in delta phi(Z, jet), |delta y(Z, jet)| and |y_boost(Z, jet)|. Vector boson production in association with jets is an excellent probe of QCD and constitutes the main background to many small cross section processes, such as associated Higgs production. These measurements are crucial tests of the predictions of perturbative QCD and current event generators, which have varied success in describing the data. Using these measurements as inputs in tuning event generators will increase the experimental sensitivity to rare signals.Comment: Published in Physics Letters B 682 (2010), pp. 370-380. 15 pages, 6 figure

Search for pair production of the scalar top quark in the electron-muon final state

We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ($\tilde{t}_1$) in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider corresponding to an integrated luminosity of 5.4 fb$^{-1}$. The scalar top quarks are assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino ($\tilde{\nu}$), and the search is performed in the electron plus muon final state. No significant excess of events above the standard model prediction is detected, and improved exclusion limits at the 95% C.L. are set in the the ($M_{\tilde{t}_1}$,$M_{\tilde{\nu}}$) mass plane

Measurement of the dijet invariant mass cross section in proton anti-proton collisions at sqrt{s} = 1.96 TeV

The inclusive dijet production double differential cross section as a function of the dijet invariant mass and of the largest absolute rapidity of the two jets with the largest transverse momentum in an event is measured in proton anti-proton collisions at sqrt{s} = 1.96 TeV using 0.7 fb^{-1} integrated luminosity collected with the D0 detector at the Fermilab Tevatron Collider. The measurement is performed in six rapidity regions up to a maximum rapidity of 2.4. Next-to-leading order perturbative QCD predictions are found to be in agreement with the data.Comment: Published in Phys. Lett. B, 693, (2010), 531-538, 8 pages, 2 figures, 6 table