On the effects of using CO2 and F2 lasers to modify the wettability of a polymeric biomaterial.

Enhancement of the surface properties of a material by means of laser radiation has been amply demonstrated previously. In this work a comparative study for the surface modification of nylon 6,6 has been conducted in order to vary the wettability characteristics using CO2 and excimer lasers. This was done by producing 50 μm spaced (with depths between 1 and 10 μm) trench-like patterns using various laser parameters such as varying the laser power for the CO2 laser and number of pulses for the excimer laser. Topographical changes were analysed using optical microscopy and white light interferometry which indicated that both laser systems can be implemented for modifying the topography of nylon 6,6. Variations in the surface chemistry were evaluated using energy-dispersive X-ray spectroscopy and x-ray photoelectron spectroscopy analysis and showed that the O2 increased by up to 1.5% At. and decreased by up to 1.6% At. for the CO2 and F2 laser patterned samples, respectively. Modification of the wettability characteristics was quantified by measuring the advancing contact angle, which was found to increase in all instances for both laser systems. Emery paper roughened samples were also analysed in the same manner to determine that the topographical pattern played a major role in the wettability characteristics of nylon 6,6. From this, it is proposed that the increase in contact angle for the laser processed samples is due to a mixed intermediate state wetting regime owed to the periodic surface roughness brought about by the laser induced trench-like topographical patterns

Wear resistant solid lubricating coatings via compression molding and thermal spraying technologies

This work combines two industrially friendly processing methods in order to create wear resistant and solid-lubricating composite coatings potentially suitable for high load applications. Layered composite coatings were fabricated over wrought stainless steel 444 (SS444) by compression molding a mixture of solid lubricant polymer, polytetrafluoroethylene (PTFE, 80 wt%), and wear resistant polymer, polyimide (PI, 20 wt%), onto iron aluminide (Fe3Al) thermal spray coatings without the need of either primers or adhesives. The fabrication process consisted of three main steps: deposition of the Fe3Al thermal spray coating onto a SS444 substrate and transfer into a metal mold; transfer, compress, and sinter mixed polymeric powder onto the thermal spray coating; and finally, sample cooling to room temperature. This method takes advantage of the high surface roughness of thermal spray coatings, which increases mechanical adhesion of slippery PTFE to the underlying metallic material. Coatings were produced with and without a small amount of graphite (5 wt%) to analyze its impact on sliding and wear properties. Unlike current coating technologies, the thickness of the coatings presented herein can be easily and quickly tailored by varying the amount of polymer powder added to the mold prior to compression or by grinding after fabrication. We produced and analyzed coatings ~1.3 mm in total thickness that portray coefficient of frictions ~0.1, similar to pure PTFE. The calculated wear rates for both coatings with and without graphite are an order of magnitude lower than what has been previously reported for coatings of similar composition. The influence of graphite on wear properties was found to be minimal due to the high content of self-lubricating PTFE yet can act as a way to lower material costs and increase the coatings load capacity

Maskless, High-Precision, Persistent, and Extreme Wetting-Contrast Patterning in an Environmental Scanning Electron Microscope

Non Peer reviewe

Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications

tThis work demonstrates superhydrophobic behavior on nanosecond laser patterned copper and brasssurfaces. Compared with ultrafast laser systems previously used for such texturing, infrared nanosecondfiber lasers offer a lower cost and more robust system combined with potentially much higher processingrates. The wettability of the textured surfaces develops from hydrophilicity to superhydrophobicity overtime when exposed to ambient conditions. The change in the wetting property is attributed to the par-tial deoxidation of oxides on the surface induced during laser texturing. Textures exhibiting steady statecontact angles of up to ∼152◦with contact angle hysteresis of around 3–4◦have been achieved. Inter-estingly, the superhydrobobic surfaces have the self-cleaning ability and have potential for chemicalsensing applications. The principle of these novel chemical sensors is based on the change in contactangle with the concentration of methanol in a solution. To demonstrate the principle of operation ofsuch a sensor, it is found that the contact angle of methanol solution on the superhydrophobic surfacesexponentially decays with increasing concentration. A significant reduction, of 128◦, in contact angle onsuperhydrophobic brass is observed, which is one order of magnitude greater than that for the untreatedsurface (12◦), when percent composition of methanol reaches to 28%

A common supersolid low-density skin sliperizing ice and toughening water surface

Skins of water and ice share the same attribute of supersolidity characterized by the identical H-O vibration frequency of 3450 cm-1. Molecular undercoordination and inter-electron-pair repulsion shortens the H-O bond and lengthen the O:H nonbond, leading to a dual process of nonbonding electron polarization. This relaxation-polarization process enhances the dipole moment, elasticity,viscosity, thermal stability of these skins with 25% density loss, which is responsible for the hydrophobicity and toughness of water skin and for the slippery of ice.Comment: arXiv admin note: text overlap with arXiv:1401.804

Laser textured surface gradients

This work demonstrates a novel technique for fabricating surfaces with roughness and wettability gradients and their subsequent applications for chemical sensors. Surface roughness gradients on brass sheets are obtained directly by nanosecond laser texturing. When these structured surfaces are exposed to air, their wettability decreases with time (up to 20 days) achieving both spatial and temporal wettability gradients. The surfaces are responsive to organic solvents. Contact angles of a series of dilute isopropanol solutions decay exponentially with concentration. In particular, a fall of 132° in contact angle is observed on a surface gradient, one order of magnitude higher than the 14° observed for the unprocessed surface, when the isopropanol concentration increased from 0 to 15.6 wt%. As the wettability changes gradually over the surface, contact angle also changes correspondingly. This effect offers multi-sensitivity at different zones on the surface and is useful for accurate measurement of chemical concentration