Simulation of Growth and Yield of Rainfed Maize Under Varied Agronomic Management and Changing Climatic Scenario in Nawalparasi, Nepal

Correction: Figure 3 was corrupted and so the PDF was replaced on 29th December 2016 with the corrected Figure 3.A field experiment and simulation modeling study in combination for different maize cultivars planted at different sowing dates were accomplished at Kawasoti-5, Nawalparasi during spring season of 2013 to assess the impact of climate change scenario as predicted by IPCC in rainfed spring maize by using CSM-CERES-Maize model. Result showed that RML-4/RML-17 produced higher kernel rows/ ear (13.77), kernel per row (30.42) and test weight (244.9 g). Significantly higher grain yield was also found for RML-4/RML-17 (6.03 t/ha) compared to Poshilo makai-1 (4.73 t/ha), Arun-2 (3.55 t/ha) and Local (2.92 t/ha). Earlier sowing date (7th April) actually produced higher kernel/row (27.97), kernel rows/ear (12.89) and 1000 grain weight (230 g). Significantly higher grain yield (5.13t/ha) was obtained in earlier sowing date (7th April). The CSM-CERES-Maize model was calibrated and found well validated with days to anthesis (RMSE= 0.426 day and D-index= 0.998), days to physiological maturity (RMSE=0.674 day and D-index= 0.999), number of grain/m2 at maturity (RMSE= 85.287 grain /m2 and D-index= 0.993), unit weight at maturity (RMSE=0.012 g/kernel and D-index= 0.854) and grain yield (RMSE=54.94 kg/ha and D-index= 1.00). The model was found sensitive to climate change parameters. The sensitivity for various climate change parameter indicated that there was severely decreased trend in simulated rainfed spring maize yield with the increment of maximum and minimum temperature, decrease in solar radiation and decrease carbondioxide concentration. Even 2°C rise in temperature can decrease around 15-20% yield of spring maize and this negative effect was even more pronounced in hybrid than other cultivars.Journal of Maize Research and Development (2015) 1(1):123-133DOI: http://dx.doi.org/10.5281/zenodo.3428

Community-based DOTS and family member DOTS for TB control in Nepal: costs and cost-effectiveness

<p>Abstract</p> <p>Background</p> <p>Two TB control strategies appropriate for South Asia (a community-based DOTS [CBD] strategy and a family-based DOTS [FBD] strategy) have been shown to be effective in Nepal in meeting the global target for the proportion of registered patients successfully treated. Here we estimate the costs and cost-effectiveness of the two strategies. This information is essential to allow meaningful comparisons between these and other strategies and will contribute to the small but growing body of knowledge on the costs and cost-effectiveness of different approaches to TB control.</p> <p>Methods</p> <p>In 2001–2, costs relating to TB diagnosis and care were collected for each strategy. Structured and semi-structured questionnaires were used to collect costs from health facility records and a sample of 10 patients in each of 10 districts, 3 using CBD and 2 using FBD. The data collected included costs to the health care system and social costs (including opportunity costs) incurred by patients and their supervisors. The cost-effectiveness of each strategy was estimated.</p> <p>Results</p> <p>Total recurrent costs per patient using the CBD and FBD strategies were US$76.2 and US$84.1 respectively. The social costs incurred by patients and their supervisors represent more than a third of total recurrent costs under each strategy (37% and 35% respectively). The CBD strategy was more cost-effective than the FBD strategy: recurrent costs per successful treatment were US$91.8 and US$102.2 respectively.</p> <p>Discussion</p> <p>Although the CBD strategy was more cost-effective than the FBD strategy in the study context, the estimates of cost-effectiveness were sensitive to relatively small changes in underlying costs and treatment outcomes. Even using these relatively patient-friendly approaches to DOTS, social costs can represent a significant financial burden for TB patients.</p

The Advanced LIGO Photon Calibrators

The two interferometers of the Laser Interferometry Gravitaional-wave Observatory (LIGO) recently detected gravitational waves from the mergers of binary black hole systems. Accurate calibration of the output of these detectors was crucial for the observation of these events, and the extraction of parameters of the sources. The principal tools used to calibrate the responses of the second-generation (Advanced) LIGO detectors to gravitational waves are systems based on radiation pressure and referred to as Photon Calibrators. These systems, which were completely redesigned for Advanced LIGO, include several significant upgrades that enable them to meet the calibration requirements of second-generation gravitational wave detectors in the new era of gravitational-wave astronomy. We report on the design, implementation, and operation of these Advanced LIGO Photon Calibrators that are currently providing fiducial displacements on the order of $10^{-18}$ m/$\sqrt{\textrm{Hz}}$ with accuracy and precision of better than 1 %.Comment: 14 pages, 19 figure

Antimicrobial use in European acute care hospitals: results from the second point prevalence survey (PPS) of healthcare-associated infections and antimicrobial use, 2016 to 2017

Antimicrobial agents used to treat infections are life-saving. Overuse may result in more frequent adverse effects and emergence of multidrug-resistant microorganisms. In 2016-17, we performed the second point-prevalence survey (PPS) of healthcare-associated infections (HAIs) and antimicrobial use in European acute care hospitals. We included 1,209 hospitals and 310,755 patients in 28 of 31 European Union/European Economic Area (EU/EEA) countries. The weighted prevalence of antimicrobial use in the EU/EEA was 30.5% (95% CI: 29.2-31.9%). The most common indication for prescribing antimicrobials was treatment of a community-acquired infection, followed by treatment of HAI and surgical prophylaxis. Over half (54.2%) of antimicrobials for surgical prophylaxis were prescribed for more than 1 day. The most common infections treated by antimicrobials were respiratory tract infections and the most commonly prescribed antimicrobial agents were penicillins with beta-lactamase inhibitors. There was wide variation of patients on antimicrobials, in the selection of antimicrobial agents and in antimicrobial stewardship resources and activities across the participating countries. The results of the PPS provide detailed information on antimicrobial use in European acute care hospitals, enable comparisons between countries and hospitals, and highlight key areas for national and European action that will support efforts towards prudent use of antimicrobials

Dynein structure and power stroke

Dynein ATPases are microtubule motors that are critical to diverse processes such as vesicle transport and the beating of sperm tails; however, their mechanism of force generation is unknown. Each dynein comprises a head, from which a stalk and a stem emerge. Here we use electron microscopy and image processing to reveal new structural details of dynein c, an isoform from Chlamydomonas reinhardtii flagella, at the start and end of its power stroke. Both stem and stalk are flexible, and the stem connects to the head by means of a linker approximately 10 nm long that we propose lies across the head. With both ADP and vanadate bound, the stem and stalk emerge from the head 10 nm apart. However, without nucleotide they emerge much closer together owing to a change in linker orientation, and the coiled-coil stalk becomes stiffer. The net result is a shortening of the molecule coupled to an approximately 15-nm displacement of the tip of the stalk. These changes indicate a mechanism for the dynein power stroke

Pressure dependent electronic properties of MgO polymorphs: A first-principles study of Compton profiles and autocorrelation functions

The first-principles periodic linear combination of atomic orbitals method within the framework of density functional theory implemented in the CRYSTAL06 code has been applied to explore effect of pressure on the Compton profiles and autocorrelation functions of MgO. Calculations are performed for the B1, B2, B3, B4, B8_1 and h-MgO polymorphs of MgO to compute lattice constants and bulk moduli. The isothermal enthalpy calculations predict that B4 to B8_1, h-MgO to B8_1, B3 to B2, B4 to B2 and h-MgO to B2 transitions take place at 2, 9, 37, 42 and 64 GPa respectively. The high pressure transitions B8_1 to B2 and B1 to B2 are found to occur at 340 and 410 GPa respectively. The pressure dependent changes are observed largely in the valence electrons Compton profiles whereas core profiles are almost independent of the pressure in all MgO polymorphs. Increase in pressure results in broadening of the valence Compton profiles. The principal maxima in the second derivative of Compton profiles shifts towards high momentum side in all structures. Reorganization of momentum density in the B1 to B2 structural phase transition is seen in the first and second derivatives before and after the transition pressure. Features of the autocorrelation functions shift towards lower r side with increment in pressure.Comment: 19 pages, 8 figures, accepted for publication in Journal of Materials Scienc

Transgenic maize phosphoenolpyruvate carboxylase alters leaf-atmosphere CO2 and 13CO2 exchanges in Oryza sativa.

The engineering process of C4 photosynthesis into C3 plants requires an increased activity of phosphoenolpyruvate carboxylase (PEPC) in the cytosol of leaf mesophyll cells. The literature varies on the physiological effect of transgenic maize (Zea mays) PEPC (ZmPEPC) leaf expression in Oryza sativa (rice). Therefore, to address this issue, leaf-atmosphere CO2 and 13CO2 exchanges were measured, both in the light (at atmospheric O2 partial pressure of 1.84 kPa and at different CO2 levels) and in the dark, in transgenic rice expressing ZmPEPC and wild-type (WT) plants. The in vitro PEPC activity was 25 times higher in the PEPC overexpressing (PEPC-OE) plants (~20% of maize) compared to the negligible activity in WT. In the PEPC-OE plants, the estimated fraction of carboxylation by PEPC (β) was ~6% and leaf net biochemical discrimination against 13CO2[Formula: see text] was ~ 2‰ lower than in WT. However, there were no differences in leaf net CO2 assimilation rates (A) between genotypes, while the leaf dark respiration rates (Rd) over three hours after light-dark transition were enhanced (~ 30%) and with a higher 13C composition [Formula: see text] in the PEPC-OE plants compared to WT. These data indicate that ZmPEPC in the PEPC-OE rice plants contributes to leaf carbon metabolism in both the light and in the dark. However, there are some factors, potentially posttranslational regulation and PEP availability, which reduce ZmPEPC activity in vivo