Fretting wear behaviour of MoS2 dry film lubricant

Dry film lubricants (DFL) are used as palliative coatings to prevent fretting wear. In this work fretting tests are carried out on coated Ti6Al4V cylinders on coated flat samples under dry sliding conditions, using an amplitude of 300 µm, 2.5 Hz frequency and 575 N normal loads. During the tests the coefficient of friction (CoF) was monitored, with tests being terminated when the coefficient of friction reached 0.7. Wear scars were analysed by profilometry and SEM to elucidate wear mechanisms. Results show that CoF initially increases rapidly to 0.4, this is then followed by a plateau region that finishes in a sudden step decrease in CoF following which CoF rises steadily. This behaviour is shown to be characteristic and interrupted tests are presented to allow elucidation of the wear scar at different stages in the lifetime and thus aid an understanding of the mechanisms of degradation which control the tribological behaviour

Grasses as Biofactories: Scoping out the Opportunities

Key points 1. Plant biopharming is set to dominate commercial recombinant protein expression for specific proteins. 2. The choice of plant species depends on a multitude of factors and is determined on a caseby- case basis. 3. As a leaf based expression system grasses would have to compete predominantly with tobacco and alfalfa. 4. The grass-endophyte symbiosis offers a number of unique possibilities for biopharming

Grasses as Biofactories: Scoping out the Opportunities

Plant biopharming is set to dominate commercial recombinant protein expression for specific proteins. The choice of plant species depends on a multitude of factors and is determined on a case- by-case basis. As a leaf based expression system grasses would have to compete predominantly with tobacco and alfalfa. The grass-endophyte symbiosis offers a number of unique possibilities for biopharming

Heat affected zones and oxidation marks in fiber laser-oxygen cutting of mild steel

The effect of cutting speed and sheet thickness on surface oxidation and heat affected zones (HAZs) has been investigated for laser-oxygen cutting of mild steel sheet with a fiber laser. Optical and scanning electron micrographs were used to determine the extent of surface oxidation and HAZ from plan and cross-sectional views, respectively. The HAZ is consistently wider at the bottom of the cut compared to the HAZ at the top of the cut. With increasing speed, the width of the HAZ at the top of the cut decreases whereas the HAZ width at the bottom of the cut generally increases. No simple, direct relationship between HAZ width and surface oxidation was seen. However, it is possible to state that in each case considered here, the HAZ would be completely removed if they are machined back by a depth equal to the extent of the surface oxidation. (C) 2011 Laser Institute of America

Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes

This paper presents an experimental investigation on the influences of laser trepanning drilling process parameters on the recast layer thickness and surface crack formation in CMSX-4 nickel-based superalloy angled holes. The effects of peak power, pulse frequency and the trepanning speed as input parameters were investigated in details by varying the laser drilling conditions using Taguchi orthogonal array-based design of experiment approach. Analysis of variance identifies the significant parameters affecting the output responses. It is found that the output responses are affected mainly by the peak power and trepanning speed. The experimental results reveal that the recast layer thickness increases with the increase of peak power and trepanning speed whereas the crack number density decreases with the increase of peak power only. Pulse frequency has no significant effect on both output responses within the range of values investigated. The knowledge gained in this parametric study could be used to improve the metallurgical characteristics of laser-drilled nickel-based acute angled holes

Plant-Symbiotic Fungi as Chemical Engineers: Multi-Genome Analysis of the Clavicipitaceae Reveals Dynamics of Alkaloid Loci

The fungal family Clavicipitaceae includes plant symbionts and parasites that produce several psychoactive and bioprotective alkaloids. The family includes grass symbionts in the epichloae clade (Epichloë and Neotyphodium species), which are extraordinarily diverse both in their host interactions and in their alkaloid profiles. Epichloae produce alkaloids of four distinct classes, all of which deter insects, and some—including the infamous ergot alkaloids—have potent effects on mammals. The exceptional chemotypic diversity of the epichloae may relate to their broad range of host interactions, whereby some are pathogenic and contagious, others are mutualistic and vertically transmitted (seed-borne), and still others vary in pathogenic or mutualistic behavior. We profiled the alkaloids and sequenced the genomes of 10 epichloae, three ergot fungi (Claviceps species), a morning-glory symbiont (Periglandula ipomoeae), and a bamboo pathogen (Aciculosporium take), and compared the gene clusters for four classes of alkaloids. Results indicated a strong tendency for alkaloid loci to have conserved cores that specify the skeleton structures and peripheral genes that determine chemical variations that are known to affect their pharmacological specificities. Generally, gene locations in cluster peripheries positioned them near to transposon-derived, AT-rich repeat blocks, which were probably involved in gene losses, duplications, and neofunctionalizations. The alkaloid loci in the epichloae had unusual structures riddled with large, complex, and dynamic repeat blocks. This feature was not reflective of overall differences in repeat contents in the genomes, nor was it characteristic of most other specialized metabolism loci. The organization and dynamics of alkaloid loci and abundant repeat blocks in the epichloae suggested that these fungi are under selection for alkaloid diversification. We suggest that such selection is related to the variable life histories of the epichloae, their protective roles as symbionts, and their associations with the highly speciose and ecologically diverse cool-season grasses

Mechanical properties and microstructure of VPS and HVOF CoNiCrAlY coatings

HVOF and VPS coatings were sprayed using a Praxair (CO-210-24) CoNiCrAlY powder. Free standing coatings underwent vacuum annealing at different temperatures for times of up to 840h. Feedstock powder, as-sprayed and annealed coatings were characterised by SEM, EDS and XRD. The hardness and Young’s modulus of as-sprayed and annealed HVOF and VPS coatings were measured, including determination of Young’s moduli of the individual phases via nanoindentation and measurement of Young’s moduli of coatings at temperatures up to 500°C. The Eshelby inclusion model was used to investigate the effect of microstructure on the coatings’ mechanical properties. The sensitivity of the mechanical properties to microstructural details was confirmed. Young’s modulus was constant to ~200°C then decreased with increasing measurement temperature. Annealing increased Young’s modulus due to a combination of decreased porosity and β volume fraction. Oxide stringers in the HVOF coating maintained its higher hardness than the VPS coating even after annealing

The Impact of Entrepreneurship Education in Higher Education: A Systematic Review and Research Agenda

Using a teaching model framework, we systematically review empirical evidence on the impact of entrepreneurship education (EE) in higher education on a range of entrepreneurial outcomes, analyzing 159 published articles from 2004 to 2016. The teaching model framework allows us for the first time to start rigorously examining relationships between pedagogical methods and specific outcomes. Reconfirming past reviews and meta-analyses, we find that EE impact research still predominantly focuses on short-term and subjective outcome measures and tends to severely underdescribe the actual pedagogies being tested. Moreover, we use our review to provide an up-to-date and empirically rooted call for less obvious, yet greatly promising, new or underemphasized directions for future research on the impact of university-based entrepreneurship education. This includes, for example, the use of novel impact indicators related to emotion and mind-set, focus on the impact indicators related to the intention-to-behavior transition, and exploring the reasons for some contradictory findings in impact studies including person-, context-, and pedagogical model-specific moderator

Enhancing discovery of genetic variants for posttraumatic stress disorder through integration of quantitative phenotypes and trauma exposure information

Background Posttraumatic stress disorder (PTSD) is heritable and a potential consequence of exposure to traumatic stress. Evidence suggests that a quantitative approach to PTSD phenotype measurement and incorporation of lifetime trauma exposure (LTE) information could enhance the discovery power of PTSD genome-wide association studies (GWASs). Methods A GWAS on PTSD symptoms was performed in 51 cohorts followed by a fixed-effects meta-analysis (N = 182,199 European ancestry participants). A GWAS of LTE burden was performed in the UK Biobank cohort (N = 132,988). Genetic correlations were evaluated with linkage disequilibrium score regression. Multivariate analysis was performed using Multi-Trait Analysis of GWAS. Functional mapping and annotation of leading loci was performed with FUMA. Replication was evaluated using the Million Veteran Program GWAS of PTSD total symptoms. Results GWASs of PTSD symptoms and LTE burden identified 5 and 6 independent genome-wide significant loci, respectively. There was a 72% genetic correlation between PTSD and LTE. PTSD and LTE showed largely similar patterns of genetic correlation with other traits, albeit with some distinctions. Adjusting PTSD for LTE reduced PTSD heritability by 31%. Multivariate analysis of PTSD and LTE increased the effective sample size of the PTSD GWAS by 20% and identified 4 additional loci. Four of these 9 PTSD loci were independently replicated in the Million Veteran Program. Conclusions Through using a quantitative trait measure of PTSD, we identified novel risk loci not previously identified using prior case-control analyses. PTSD and LTE have a high genetic overlap that can be leveraged to increase discovery power through multivariate methods

Plant-symbiotic fungi as chemical engineers: multi-genome analysis of the Clavicipitaceae reveals dynamics of alkaloid Loci

The fungal family Clavicipitaceae includes plant symbionts and parasites that produce several psychoactive and bioprotective alkaloids. The family includes grass symbionts in the epichloae clade (Epichloë and Neotyphodium species), which are extraordinarily diverse both in their host interactions and in their alkaloid profiles. Epichloae produce alkaloids of four distinct classes, all of which deter insects, and some—including the infamous ergot alkaloids—have potent effects on mammals. The exceptional chemotypic diversity of the epichloae may relate to their broad range of host interactions, whereby some are pathogenic and contagious, others are mutualistic and vertically transmitted (seed-borne), and still others vary in pathogenic or mutualistic behavior. We profiled the alkaloids and sequenced the genomes of 10 epichloae, three ergot fungi (Claviceps species), a morning-glory symbiont (Periglandula ipomoeae), and a bamboo pathogen (Aciculosporium take), and compared the gene clusters for four classes of alkaloids. Results indicated a strong tendency for alkaloid loci to have conserved cores that specify the skeleton structures and peripheral genes that determine chemical variations that are known to affect their pharmacological specificities. Generally, gene locations in cluster peripheries positioned them near to transposon-derived, AT-rich repeat blocks, which were probably involved in gene losses, duplications, and neofunctionalizations. The alkaloid loci in the epichloae had unusual structures riddled with large, complex, and dynamic repeat blocks. This feature was not reflective of overall differences in repeat contents in the genomes, nor was it characteristic of most other specialized metabolism loci. The organization and dynamics of alkaloid loci and abundant repeat blocks in the epichloae suggested that these fungi are under selection for alkaloid diversification. We suggest that such selection is related to the variable life histories of the epichloae, their protective roles as symbionts, and their associations with the highly speciose and ecologically diverse cool-season grasses