10,204 research outputs found
Detection of electronic nematicity using scanning tunneling microscopy
Electronic nematic phases have been proposed to occur in various correlated
electron systems and were recently claimed to have been detected in scanning
tunneling microscopy (STM) conductance maps of the pseudogap states of the
cuprate high-temperature superconductor Bi2Sr2CaCu2O8+x (Bi-2212). We
investigate the influence of anisotropic STM tip structures on such
measurements and establish, with a model calculation, the presence of a
tunneling interference effect within an STM junction that induces
energy-dependent symmetry-breaking features in the conductance maps. We
experimentally confirm this phenomenon on different correlated electron
systems, including measurements in the pseudogap state of Bi-2212, showing that
the apparent nematic behavior of the imaged crystal lattice is likely not due
to nematic order but is related to how a realistic STM tip probes the band
structure of a material. We further establish that this interference effect can
be used as a sensitive probe of changes in the momentum structure of the
sample's quasiparticles as a function of energy.Comment: Accepted for publication (PRB - Rapid Communications). Main text (5
pages, 4 figures) + Supplemental Material (4 pages, 4 figures
Genome-wide association studies identify heavy metal ATPase3 as the primary determinant of natural variation in leaf cadmium in Arabidopsis thaliana
Peer reviewedPublisher PD
Sizes and Shapes of Young Star Cluster Light Profiles in M83
We measure the radii and two-dimensional light profiles of a large sample of
young, massive star clusters in M83 using archival HST/WFC3 imaging of seven
adjacent fields. We use GALFIT to fit the two-dimensional light profiles of the
clusters, from which we find effective (half-light) radii, core radii, and
slopes of the power-law (EFF) profile (). We find lognormal distributions
of effective radius and core radius, with medians of 2.5 pc and
1.3 pc, respectively. Our results provide strong evidence for a
characteristic size of young, massive clusters. The average effective radius
and core radius increase somewhat with cluster age. Little to no change in
effective radius is observed with increasing galactocentric distance, except
perhaps for clusters younger than 100 Myr. We find a shallow correlation
between effective radius and mass for the full cluster sample, but a stronger
correlation is present for clusters 200-300 Myr in age. Finally, the majority
of the clusters are best fit by an EFF model with index . There is
no strong evidence for change in with cluster age, mass, or
galactocentric distance. Our results suggest that clusters emerge from early
evolution with similar radii and are not strongly affected by the tidal field
of M83. Mass loss due to stellar evolution and/or GMC interactions appear to
dominate cluster expansion in the age range we study.Comment: 34 pages, 11 figures, 3 tables, accepted by MNRAS. Machine-readable
table attached (full version of Table 3). To obtain, download the source file
from the "Other formats" link abov
Polarisation measurements with a CdTe pixel array detector for Laue hard X-ray focusing telescopes
Polarimetry is an area of high energy astrophysics which is still relatively
unexplored, even though it is recognized that this type of measurement could
drastically increase our knowledge of the physics and geometry of high energy
sources. For this reason, in the context of the design of a Gamma-Ray Imager
based on new hard-X and soft gamma ray focusing optics for the next ESA Cosmic
Vision call for proposals (Cosmic Vision 2015-2025), it is important that this
capability should be implemented in the principal on-board instrumentation. For
the particular case of wide band-pass Laue optics we propose a focal plane
based on a thick pixelated CdTe detector operating with high efficiency between
60-600 keV. The high segmentation of this type of detector (1-2 mm pixel size)
and the good energy resolution (a few keV FWHM at 500 keV) will allow high
sensitivity polarisation measurements (a few % for a 10 mCrab source in 106s)
to be performed. We have evaluated the modulation Q factors and minimum
detectable polarisation through the use of Monte Carlo simulations (based on
the GEANT 4 toolkit) for on and off-axis sources with power law emission
spectra using the point spread function of a Laue lens in a feasible
configuration.Comment: 10 pages, 6 pages. Accepted for publication in Experimental Astronom
An approach to integrating manufacturing data from legacy Injection Moulding Machines using OPC UA
To achieve the ambitions related with the concept of a Smart Factory, manufacturers of new industrial devices have been developing and releasing products capable of integrating themselves into fully-connected environments, with the communication capabilities and advanced specifications required. In these environments, the automatic retrieval of data across the shop floor is a must, allowing the analysis of machine performance for increased production quality and outputs. On most of the recently released industrial devices this machine data is readily available. However, the same is not true when using legacy devices. It is also well established that most SMEs are unable or do not intend to radically replace their industrial devices with this purpose only, since that would imply a high investment, and mainly because many of these legacy machines remain highly productive. That said, there is a need to develop integration methodologies for these legacy industrial devices and provide them with smart factory communication capabilities that make them suitable for the new Smart Factory environments.
In this work, an approach is proposed, using as a case study an industrial shop floor, to integrate data from a range of injection moulding machines, from different generations and different models / manufacturers. This equipment diversity renders the automatic interconnection extremely challenging, but is also representative of many existing industrial scenarios. This research will contribute to the development of integration methodologies and, consequently, improve equipment compatibility. To apply these methodologies, information about specific machines within the shop floor was gathered, as well as their communication and I/O capabilities, together with other features deemed relevant. A trend in recently released machines can be identified, revealing a special focus on the use of OPC UA standard, making use of its address space based on the structured Euromap information models. On the other hand, the legacy devices mainly allow outputting a text file to an external storage unit connected to the machine, containing machine and injection cycles related information. Regarding the communication interfaces available, the Ethernet interface reveals to be the most common among the recently acquired machines, while USB is the main interface in older equipment.
An experimental solution was developed for the presented case study, which uses the machine's USB interface to access these files at each injection cycle, mapping the acquired data to structured information model variables, according with Euromap specifications, and making it available through an OPC UA server address space. The developed server provides a standardized, interoperable, scalable, and secure approach for data exchange between the injection moulding machines and various OPC UA clients, allowing device monitoring and control during operation, as well as transmitting this data to higher-level management systems, e.g., MES and ERP systems. This solution shows that older legacy devices, available across the shop floors, can be retrofitted and integrated in Smart Factory scenarios, side-by-side with recently released equipment, giving production managers access to information needed to monitor and improve the production process, thus moving towards the Factories of the Future.info:eu-repo/semantics/publishedVersio
Performance evaluation of a DC-AC inverter controlled with ZAD-FPIC
Introduction− Power converters are used in mi-crogrids to transfer power to the load with a regulated voltage. However, the DC-AC converters present distor-tions in the waveform that can be improved with the help of real-time controllers.Objective−Evaluate the response in alternating cur-rent of the buck converter controlled with the ZAD-FPIC technique.Methodology−Based on the differential equations that describe the buck power converter, the ZAD and FPIC controllers are designed. Afterwards, simulations of the complete controlled system are made using Simulink of MATLAB. Then, the system is implemented experi-mentally and the controller is executed in real-time with the help of a DS1104 from dSPACE. In the end, several tests are carried out to check the effectiveness of the controller.Results− The results show that the controller allows good stability against different variations in the system and in the load.Conclusions−The ZAD-FPIC technique controls the variable and tracks changes in the waveform, magni-tude, and frequency of the reference signal. The control-ler presents good stability to different tests, tracking the reference signal after each event.Introducción− Los convertidores de potencia son utili-zados en las micro redes para transferir la potencia a la carga con una tensión regulada. Sin embargo, los conver-tidores DC-AC presentan distorsiones en la forma de onda que pueden ser mejoradas con la ayuda de controladores en tiempo real.Objetivo− Evaluar la respuesta en corriente alterna del convertidor buck controlado con la técnica ZAD-FPIC.Metodología− Se parte de las ecuaciones diferenciales que describen el convertidor de potencia buck, luego se diseñan los controladores ZAD y FPIC, se hacen simu-laciones del sistema completo controlado en Simulink de Matlab, se implementa el sistema de forma experimental y el controlador se ejecuta en tiempo real con la ayuda de una DS1104 de la empresa dSPACE, al final se realizan varias pruebas para comprobar la efectividad del controlador.Resultados− Los resultados muestran que el controlador permite que una buena estabilidad contra diversas varia-ciones en el sistema y en la carga.Conclusiones− La técnica ZAD-FPIC controla la varia-ble y realiza seguimiento ante cambios en la forma de onda, magnitud y frecuencia de la señal de referencia. El controlador presenta buena estabilidad ante diferentes pruebas, siguiendo la señal de referencia después de cada event
Parameter selection for model updating with global sensitivity analysis
National Science Foundation of China (NSFC) under Grant No. 11372084 Sem PDF conforme despacho.The problem of selecting parameters for stochastic model updating is one that has been studied for decades, yet no method exists that guarantees the ‘correct’ choice. In this paper, a method is formulated based on global sensitivity analysis using a new evaluation function and a composite sensitivity index that discriminates explicitly between sets of parameters with correctly-modelled and erroneous statistics. The method is applied successfully to simulated data for a pin-jointed truss structure model in two studies, for the cases of independent and correlated parameters respectively. Finally, experimental validation of the method is carried out on a frame structure with uncertainty in the position of two masses. The statistics of mass positions are confirmed by the proposed method to be correctly modelled using a Kriging surrogate.authorsversionpublishe
Shot noise and spin-orbit coherent control of entangled and spin polarized electrons
We extend our previous work on shot noise for entangled and spin polarized
electrons in a beam-splitter geometry with spin-orbit (\textit{s-o})
interaction in one of the incoming leads (lead 1). Besides accounting for both
the Dresselhaus and the Rashba spin-orbit terms, we present general formulas
for the shot noise of singlet and triplets states derived within the scattering
approach. We determine the full scattering matrix of the system for the case of
leads with \textit{two} orbital channels coupled via weak \textit{s-o}
interactions inducing channel anticrossings. We show that this interband
coupling coherently transfers electrons between the channels and gives rise to
an additional modulation angle -- dependent on both the Rashba and Dresselhaus
interaction strengths -- which allows for further independent coherent control
of the electrons traversing the incoming leads. We derive explicit shot noise
formulas for a variety of correlated pairs (e.g., Bell states) and lead spin
polarizations. Interestingly, the singlet and \textit{each} of the triplets
defined along the quantization axis perpendicular to lead 1 (with the local
\textit{s-o} interaction) and in the plane of the beam splitter display
distinctive shot noise for injection energies near the channel anticrossings;
hence, one can tell apart all the triplets, in addition to the singlet, through
noise measurements. We also find that spin-orbit induced backscattering within
lead 1 reduces the visibility of the noise oscillations, due to the additional
partition noise in this lead. Finally, we consider injection of two-particle
wavepackets into leads with multiple discrete states and find that two-particle
entanglement can still be observed via noise bunching and antibunching.Comment: 30 two-column pages and 7 figure
Box/peanut-shaped bulges in action space
Abstract We introduce the study of box/peanut (B/P) bulges in the action space of the initial axisymmetric system. We explore where populations with different actions end up once a bar forms and a B/P bulge develops. We find that the density bimodality due to the B/P bulge (the X-shape) is better traced by populations with low radial, , or vertical, , actions, or high azimuthal action, . Generally populations separated by have a greater variation in bar strength and vertical heating than those separated by . While the bar substantially weakens the initial vertical gradient of , it also drives a strikingly monotonic vertical profile of . We then use these results to guide us in assigning metallicity to star particles in a pure N-body model. Because stellar metallicity in unbarred galaxies depends on age as well as radial and vertical positions, the initial actions are particularly well suited for assigning metallicities. We argue that assigning metallicities based on single actions, or on positions, results in metallicity distributions inconsistent with those observed in real galaxies. We therefore use all three actions to assign metallicity to an N-body model by comparing with the actions of a star-forming, unbarred simulation. The resulting metallicity distribution is pinched on the vertical axis, has a realistic vertical gradient and has a stronger X-shape in metal-rich populations, as found in real galaxies
- …