CLUSTERING OF NETWORK DEVICES TO FORM A VIRTUAL NETWORK SERVICE CONTROL PLANE

Enterprise networks often consist of multiple sites that often operate in a hierarchical manner for routing traffic among the sites, as well as to/from external networks. With the deployment of enterprise or hybrid cloud services within enterprise networks, such as cloud productivity services, communication services, etc. many policies, security, and/or performance requirements have to be met that often depend on the knowledge of sources and destinations, including their user/group information, security information, credentials, etc. However, it is often difficult to aggregate such information to scale in an end-to-end manner, similar to routing prefixes, as it can be difficult to store such information within the hardware resources of a network. In order to address such issues, techniques are presented herein through which a clustering capability can be enabled for existing and/or newly deployed physical and/or virtual networking devices in order to form a virtual network service control plane that can facilitate scaling for the deployment of hybrid cloud services. As described in further detail herein, networking protocols can be utilized to provide intent and guidance regarding the replication capability of databases in distributed operating system infrastructure within a set of networking devices such that the cluster forms the virtual network service control plane

Online and Hybrid Teaching Effects on Graduate Attributes: Opportunity or Cause for Concern?

The opportunity to develop graduate attributes beyond disciplinary expertise is an essential component of any degree programme, and students should develop these during their time within higher education. Graduate attributes can be considered as high-level skills and qualities beyond technical knowledge, which enable higher education institutions to produce more employable graduates. However, there are significant challenges in developing such skills and qualities, where remote teaching and learning complicate this further. Online teaching does not wholly derail the opportunities for students to achieve existing graduate attributes—in contrast, it also creates opportunities for innovation and shapes graduates in preparation to be the next-generation workforce. In this paper, we aim to study and synthesise existing knowledge on the effect of online hybrid teaching on graduate attributes. A systematic literature survey was completed revealing that educational institutions continue using online or hybrid instructional modes, affecting graduate attributes positively and negatively. Therefore, to effectively develop graduate attributes, there is a requirement for fundamental changes in instructional strategies, teaching–learning behaviours, upgrading of facilities and curriculum adaptations. We review graduate attributes in the higher education literature, including the impacts resulting from remote teaching and learning. The paper also identifies the general challenges to developing graduate attributes, as well as more specific challenges as a result of hybrid and online teaching and learning

Enhancing the antibacterial performance of orthopaedic implant materials by fibre laser surface engineering

Implant failure caused by bacterial infection is extremely difficult to treat and usually requires the removal of the infected components. Despite the severe consequence of bacterial infection, research into bacterial infection of orthopaedic implants is still at an early stage compared to the effort on enhancing osseointegration, wear and corrosion resistance of implant materials. In this study, the effects of laser surface treatment on enhancing the antibacterial properties of commercially pure (CP) Ti (Grade 2), Ti6Al4V (Grade 5) and CoCrMo alloy implant materials were studied and compared for the first time. Laser surface treatment was performed by a continuous wave (CW) fibre laser with a near-infrared wavelength of 1064 nm in a nitrogen-containing environment. Staphylococcus aureus, commonly implicated in infection associated with orthopaedic implants, was used to investigate the antibacterial properties of the laser-treated surfaces. The surface roughness and topography of the laser-treated materials were analysed by a 2D roughness testing and by AFM. The surface morphologies before and after 24 h of bacterial cell culture were captured by SEM, and bacterial viability was determined using live/dead staining. Surface chemistry was analysed by XPS and surface wettability was measured using the sessile drop method. The findings of this study indicated that the laser-treated CP Ti and Ti6Al4V surfaces exhibited a noticeable reduction in bacterial adhesion and possessed a bactericidal effect. Such properties were attributable to the combined effects of reduced hydrophobicity, thicker and stable oxide films and presence of laser-induced nano-features. No similar antibacterial effect was observed in the laser-treated CoCrMo

Burden of Parkinsonism and Parkinson\u27s Disease on Health Service Use and Outcomes in Latin America

\ua9 2023 - The authors. Published by IOS Press.Background: Little is known about the burden of parkinsonism and Parkinson\u27s disease (PD) in Latin America. Better understanding of health service use and clinical outcomes in PD is needed to improve its prognosis. Objective: The aim of the study was to estimate the burden of parkinsonism and PD in six Latin American countries. Methods: 12,865 participants aged 65 years and older from the 10/66 population-based cohort study were analysed. Baseline assessments were conducted in 2003-2007 and followed-up 4 years later. Parkinsonism and PD were defined using current clinical criteria or self-reported diagnosis. Logistic regression models assessed the association between parkinsonism/PD with baseline health service use (community-based care or hospitalisation in the last 3 months) and Cox proportional hazards regression models with incident dependency (subjective assessment by interviewer based on informant interview) and mortality. Separate analyses for each country were combined via fixed effect meta-analysis. Results: At baseline, the prevalence of parkinsonism and PD was 7.9% (n = 934) and 2.6% (n = 317), respectively. Only parkinsonism was associated with hospital admission at baseline (OR 1.89, 95% CI 1.30-2.74). Among 7,296 participants without dependency at baseline, parkinsonism (HR 2.34, 95% CI 1.81-3.03) and PD (2.10, 1.37-3.24) were associated with incident dependency. Among 10,315 participants with vital status, parkinsonism (1.73, 1.50-1.99) and PD (1.38, 1.07-1.78) were associated with mortality. The Higgins I2 tests showed low to moderate levels of heterogeneity across countries. Conclusions: Our findings show that older people with parkinsonism or PD living in Latin America have higher risks of developing dependency and mortality but may have limited access to health services

Multidrug resistant tuberculosis co-existing with aspergilloma and invasive aspergillosis in a 50 year old diabetic woman: a case report

Aspergilloma and invasive aspergillosis coexisting with multidrug resistant Mycobacterium tuberculosis (MDR-TB) in the same patient is a rare entity. We report a 50 year old South Indian woman, a diabetic, who presented to us with complaints of productive cough and hemoptysis for the past 2 months. She was diagnosed to have pulmonary tuberculosis 2 years ago for which she took irregular treatment. Lung imaging showed features of a thick walled cavity in the right upper lobe with an indwelling aspergilloma. She underwent a right lung upper lobe resection. Biopsy and culture of the resected specimen showed the coexistence of Aspergillus fumigatus and multi-drug resistant Mycobacterium tuberculosis. 2 blood cultures grew Aspergillus fumigatus. She was successfully treated with Voriconazole and anti tuberculous therapy against MDR-TB

Differential attraction and repulsion of Staphylococcus aureus and Pseudomonas aeruginosa on molecularly smooth titanium films

Magnetron sputtering techniques were used to prepare molecularly smooth titanium thin films possessing an average roughness between 0.18 nm and 0.52 nm over 5 μm × 5 μm AFM scanning areas. Films with an average roughness of 0.52 nm or lower were found to restrict the extent of P. aeruginosa cell attachment, with less than 0.5% of all available cells being retained on the surface. The attachment of S. aureus cells was also limited on films with an average surface roughness of 0.52 nm, however they exhibited a remarkable propensity for attachment on the nano-smoother 0.18 nm average surface roughness films, with the attachment density being almost twice as great as that observed on the nano-rougher film. The difference in attachment behaviour can be attributed to the difference in morphology of the rod-shaped P. aeruginosa compared to the spherical S. aureus cells

Label-free protein detection based on the heat-transfer method-a case study with the peanut allergen Ara h 1 and aptamer-based synthetic receptors

© 2015 American Chemical Society. Aptamers are an emerging class of molecules that, because of the development of the systematic evolution of ligands by exponential enrichment (SELEX) process, can recognize virtually every target ranging from ions, to proteins, and even whole cells. Although there are many techniques capable of detecting template molecules with aptamer-based systems with high specificity and selectivity, they lack the possibility of integrating them into a compact and portable biosensor setup. Therefore, we will present the heat-transfer method (HTM) as an interesting alternative because this offers detection in a fast and low-cost manner and has the possibility of performing experiments with a fully integrated device. This concept has been demonstrated for a variety of applications including DNA mutation analysis and screening of cancer cells. To the best our knowledge, this is the first report on HTM-based detection of proteins, in this case specifically with aptamer-type receptors. For proof-of-principle purposes, measurements will be performed with the peanut allergen Ara h 1 and results indicate detection limits in the lower nanomolar regime in buffer liquid. As a first proof-of-application, spiked Ara h 1 solutions will be studied in a food matrix of dissolved peanut butter. Reference experiments with the quartz-crystal microbalance will allow for an estimate of the areal density of aptamer molecules on the sensor-chip surface

Total mercury content of Indian squid <i>Loligo duvauceli</i> Orbigny from Tuticorin waters, south east coast of India

219-220Mercury content in L. duvauceli varied from 0.008 to 0.123 ppm wet weight (0.038 ppm to 0.202 ppm dry weight) with a mean value of 0.018 ± 0.002 ppm wet ppm wet weight (0.076 ± 0.008 ppm dry weight). These levels are well below the FAO/WHO recommended upper limit of 0.5 ppm